Question about 2000 Jeep Grand Cherokee

3 Answers

I have a Jeep grand cherokee laredo and i have installed a new fuel pump and fuel filter but it will not start i have checked all fuses and relays please help.

Posted by on

  • 1 more comment 
  • candyacre Aug 15, 2010

    I will be changing out crank sensor tomorrow and will let u know hows those solutions helped but have run into another problem now i have a no key light that comes on when u try to start it




  • candyacre Aug 16, 2010

    i need a diagram of how to install the crank sensor..i do not have a manuel and cant afford a book from auto zone

  • candyacre Aug 17, 2010

    i installed a new crank sensor and now my jeep is running fine

×

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Having same issue with my 2000 grand cherokee. sometimes fuel pump will prime and car starts the other 50% of time no fuel pump noise only smaller radiator fan will come on and make vibrating whining noise. I have changed out fuel pump and filter as well as checked and ruled out all fuses/relays involved. Need help too

Posted on Aug 10, 2010

  • candyacre Aug 17, 2010

    check ur crank sensor . That is what was wrong with my 2000 jeep

×

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 58 Answers

If it is getting fuel and spark then make sure your ground cable is getting a good ground to the motor and the frame to the battery.

Posted on Apr 26, 2014

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 115 Answers

Need to check for spark at plug wire,also check for fuel pressure at fuel rail with key on,should have pressure.

Posted on Aug 04, 2010

  • 1 more comment 
  • candyacre Aug 05, 2010

    it is getting fuel to fuel rail .but what does it mean if no spark at plug wire?

  • william greenaway
    william greenaway Aug 05, 2010

    what engine do you have. It may have a bad crank sensor which is mounted on the bell housing.Have seen alot of the jeeps with this problem.

  • candyacre Aug 06, 2010

    it is a v6 not sure of engine size but i wanna say 4.0

×

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

fyrebyrd1
  • 121 Answers

SOURCE: diagram to remove and install a fuel pump on 1999 jeep grand cherokee laredo

I apologize for not being able to provide a diagram, and it's been a while since I've replaced a fuel pump in a Jeep like yours, however the fuel pump for that vehicle is located within the fuel tank. You will typically disconnect power from the battery,relieve the pressure from the fuel rail to the injectors. In most cases the test port on the fuel rail has a schrader valve "valve core" like a tire valve, which utilizing a rag to absorb excess fuel you can depress to relieve pressure. You will then have to detach the fuel filler tube and vent tube at the filler neck. With a floor jack supporting the tank ,there should be a couple of bolts holding either two straps around the tank or a large cover that covers and supports the tank itself ,that will need removal. Once you have removed these and you should be able to access the top of the tank. Bear in mind you don't put the fuel pump/sending unit wiring harness or the fuel and vent tubing under too much strain as you lower the tank. you should have enough room to disconnect this wiring and fuel tubing. the tubing will probably have a quick disconnect setup where it attaches to the pump assembly. Once you have the tank on the ground take a suitable (non sparking drift and hammer) to tap the retaining ring that holds the pump in the tank, around the openig to release it. The pump assembly will be spring loaded and the top may pop up out of the tank. Just be sure to protect yourself from any fuel that might spray up. To reinstall can be a slight chore sometimes, as the assembly is spring loaded. It usually goes in with just a slight amount of effort though. Remember to replace the fuel sock on the pump and o-ring seal around the top of the opening. You can purchase just the electric pump, but I'd recommend replacing the whole fuel pump assembly. It will cost more in parts, but longer part warranty and lesser chance of further damaging the assembly are the benefits. Naturally installation is the reverse of removal. I'd recommend a new fuel filter as well, or shortly thereafter. Chrysler factory replacement units recommend draining all the old fuel from the tank and replacing with new fuel (never done that, and with the price of gas, probably won't start) I have never seen an adverse effect from not doing so. I hope this posting has helped.

Posted on Nov 13, 2008

ZJLimited
  • 17970 Answers

SOURCE: fuse box diagram for 1995 jeep grand cherokee laredo

I have the same model Grand Cherokee Limited 5.2L V8, nice truck; for fuse panel description and locations, check page 7 and next. All the infor that you need is here: Jeep-ZJ-Grand Cherokee-Secc-8W-Wiring-Diagrams.


Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Posted on Aug 22, 2012

nobodyrick
  • 1 Answer

SOURCE: 96 jeep grand cherokee 4.0

I ve put coil pickup' crank sensor' coil still no power to fuse block on finder' no fire to plugs ' don't here fuel pump, this is on one another one blows fuse to the firing ever time I turn the switch on

Posted on Dec 09, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 99 jeep grand Cherokee Laredo it cranks but it wont start


Check for spark at plugs, fuel pressure key on/engine off, and last compression test. If no spark, check all fuses then ignition module/coil. If no fuel pressure, check fuses, relay and listen for pump noise for two seconds or so after key on. If low compression, check timing belt (if any).

Apr 29, 2015 | Jeep Cars & Trucks

1 Answer

Are their any other relays or fuses for the fuel pump in a 1994 jeep grand cherokee laredo


there is one fuse and relay for the fuel pump. if these are good and the pump is not running try hitting the fuel tank with someone trying to start car, if it starts the pump is no good and needs replacing. it could be a bad connection for the pump. pumps are common problem.

Sep 04, 2014 | Cars & Trucks

1 Answer

I have a 1993 Jeep Grand cherokee laredo with the 4.0 its starts for only a few seconds and dies changed the fuel pump and fuel filter and the sercurity light doesn't come on im stumped any help ?


Check the crankshaft position sensor, i have repaired 3 Jeeps (after the owner spent a lot of time and money replacing fuel pumps,TPS, and many other items) then got frustrated, brought it to me and within an hour it was running fine with a new CPS

Apr 04, 2013 | Cars & Trucks

1 Answer

Replaced fuel pump, car turns over, but gauges don't work and jeep 2004 grand cherokee laredo will not start


check all fuses, inside drive and under-hood, there is a fuel relay under the hood it should click when ignition is turned o. Good Luck Tim

May 22, 2011 | Jeep Grand Cherokee Cars & Trucks

1 Answer

I cant find the obd plug in on my 94 jeep grand cherokee laredo and my jeep will turn over but is hard to start what would cause this?


It does not have an obd11 connector, it's too old. The extended crank time could be a couple of things though. I've seen problems with fuel pumps, fuel pump relays and crankshaft sensors. How many miles on it? Has the fuel pump or filter been changed before?

Apr 03, 2011 | 1994 Jeep Grand Cherokee

1 Answer

2000 Jeep Grand cherokee Laredo wont start. Engine turn over . No noise from fuel pump with ignition on. Replaced fuel pump and filter.Turn ignition on- pump did not run.Jumped the fuel pump at the pump...


sounds alot the the pcm it controls the fuel pump and ign system but the anti theft would keep it from starting because the key has a transponder in it programmed for that vehicle and that would kill all ign if triggered

Sep 22, 2009 | 2000 Jeep Grand Cherokee

3 Answers

Basically, my 2000 Jeep Grand Cherokee Laredo 4.0L is turning over but doesn't start. I purchased some starting fluid and sprayed it into the carburetor. After that, it starts for a few seconds, but...


Your fuel pump is in the gas tank. Before going there check the relay and all attending fuses as well as the fuel filter (on top of pump/sending unit)
If you can't hear the pump running when you first turn the key on, likely it is electrical. If you can, then could be the filter. There are other reasons for your problem but start with the easier common stuff.

Aug 04, 2009 | 2000 Jeep Grand Cherokee

1 Answer

Fuel fileter


Get under the vehicle and start at the fuel tank and go forward you will find it. If its a Grand Cherokee Laredo the fuel filter is located inside the fuel pump so the whole fuel pump has to be replaced

Nov 30, 2008 | 2000 Jeep Cherokee

1 Answer

93 Jeep Grand Cherokee Laredo


Could be a sensor.I'm thinking more along the lines of a fuel pump or fuel filter.If the fuel pump is going bad..similar symptoms.Would be advisable to install a pressure gauge at the engine,and check fuel pressure when it's acting up.

Jul 13, 2008 | 1993 Jeep Grand Cherokee

Not finding what you are looking for?
2000 Jeep Grand Cherokee Logo

506 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...