Question about 1994 Mercury Cougar

1 Answer

The radiator cooling fan will not come on when the engine gets hot. Do you think it is a bad fuse, if yes where is the fuse. Or perhaps a circuit breaker, if there is one. Or could it be a relay and if it is where is the relay? The fan itself works good it is the turning on of the fan that is bad.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Fuse relay is under the hood next to the battery. location is (5FL) 60 amp yellow fuse.

Posted on Aug 22, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What cause of overheat from engine


an engine will overheat if the rad cooling fan is not working, this will have to be check to see if its the fan motor, the fan relay. low coolant level, top up coolant check for leaks. could be head gasket problem, bad water pump(impeller worn).

Aug 08, 2014 | Daihatsu Charade Cars & Trucks

2 Answers

The cooling fan does not turn on when my 96 Chrysler Concorde when the engine gets hot...where should I look for the problem?


Somewhere around the flange of the engine cooling radiator is a thermostat that opens and closes a circuit for the fan, but first check the fuse box in the engine compartment and look for the engine fan relay fuse... Check it out first!

Dec 31, 2012 | Cars & Trucks

1 Answer

Fan comes on when switch ignition on instead of when hot Tazz


If the fan not turning on when car engine getting hot,then car will notice overheating.Click this link below for troubleshooting:---http://technoanswers.blogspot.in/2012/02/car-running-hot.html--------To know how engine cooling system works ,click the link below :----Engine cooling components working?

http://repairhelpcenter.blogspot.com/2011/11/engine-cooling-components-working.html

------------------
How does Vehicles Engine cooling system works? http://repairhelpcenter.blogspot.com/2011/11/how-does-vehicles-engine-cooling-system.html
------------How to Replace Engine cooling Fan:-- http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-engine-cooling-fan-on.html
-----------Replace Fan Relay but still Radiator cooling fans not working? http://schematicsdiagram.blogspot.com/2011/12/replace-fan-relay-but-still-radiator.html
----------DIC says "COOLING FAN FAULT"? http://schematicsdiagram.blogspot.com/2011/12/dic-says-cooling-fan-fault.html
---------Where Is Radiator Fan relay and Fuse Located?

http://schematicsdiagram.blogspot.com/2011/12/where-is-radiator-fan-relay-and-fuse.html

--------

This will help.

Thanks.

Feb 09, 2012 | Cars & Trucks

1 Answer

My cadi 1988 is running ruff and quit running feels like over heating but no leaks, just smells


REPLACE THERMOSTAT AND RADIATOR PRESSURE CAP.MAKE SURE COOLANT NOT LOW.IF ALL IS GOOD CHECK FOR LEAKING WATER PUMP WEEP HOLE IF LEAKING REPLACE WATER PUMP.MAKE SURE COOLING FANS RUNNING.IF ENGINE RUNNING HOT WHILE SITTING LONG TRAFFIC LINE AND COOLANT NOT RUNNING.CHECK COOLANT FAN RELAYS AND FUSE.IF ALL IS GOOD HOT WIRE MAKE SURE COOLING FAN MOTOR GOOD IF COOLING FAN DONT RUN WHEN HOT WIRED FAN MOTOR BAD.IF FAN MOTOR OKAY AND FUSE RELAYS GOOD YOU HAVE FAULTY COOLING FAN WIRING.YOU COULD HAVE BAD ENGINE COOLANT SENSOR OR FAULT IN ECM CODE SCAN TO CHECK THEM BOTH.CHECK ENGINE OIL.LOOK LIKE MILK SHAKE YOU HAVE LEAKING HEAD GASKET.IF OIL LOOKS OKAY.YOUR ENGINE BLOCK, RADIATOR AND HEATER CORE NEED FLUSHING.

Sep 20, 2011 | 1988 Cadillac Sedan DeVille

1 Answer

Temperature gauge rises, coolant is not leaking? and have full tank of it. "Low Trac" light always comes on, then the anti-lock and "track off" light comes on and stays on until my car...


IF COOLANT TEMPERATURE RISING,CHECK TOP RADIATOR HOSE IF TOP RADIATOR HOSE IS NOT HOT REPLACE THERMOSTAT AND RADIATOR PRESSURE CAP.IF ALL IS GOOD.IF CAR OVERHEAT WHILE SITTING IN A LONG TRAFFIC LINE.THE COOLING FANS NOT WORKING,CHECK COOLANT FANS FUSE AND RELAYS.IF BOTH IS GOOD.HOT WIRE TO SEE IF COOLANT FAN TURNS ON IF NO FAN MOTOR BAD.IF YES FAN MOTOR GOOD. PROBLEM COULD BE FAULTY COOLING FAN WIRING OR BAD ENGINE COOLANT TEMPERATURE SENSOR BAD OR FAULT IN THE PCM.

Sep 12, 2011 | 1999 Oldsmobile Alero

3 Answers

Ford focus 2006 engine overheating once ac swicth is on..


CHECK TO SEE IF COOLING FAN IS RUNNING.IF NO CHECK COOLING FAN FUSE AND RELAY.THE COOLING FAN NEED TO BE RUNNING WHEN AC ON BECAUSE AIR CONDITIONER PUT A LOAD ON ENGINE.COOLING FAN KEEP RADIATOR AND AC CONDENSOR COOL.FAN NEED TO RUNNING.

Sep 04, 2011 | Ford Focus Cars & Trucks

3 Answers

My radiator fan is not working and I cannot find any of the relay fuses I have seen in other cars for this type of problem.


Follow the wiring back from the fan motor, the relay is often found at about the height of the bottom of the radiator on the inner fender. Check that connection is clean and free of corrosion. Check that the fan works by taking two trailing wires directly from the bettery terminals and connecting then to the fan motor directly. Use a voltmeter and check the voltage at the relay when engine is cold and shortly after the radiator top hose from the engine becomes hot (the coolant sensor should have signalled for the fan to switch on at this time). No voltage indicates a break in the circuit or faulty sensor. Voltage but no fan indicates faulty relay

Apr 03, 2011 | 1994 Pontiac Sunbird

1 Answer

1999 Alero: I replace the head gaskets thermostat water pump n...


OK you have done the engine side of things. If you have an electric radiator cooling fan make sure it comes on when radiator is hot, if not the fan motor is caned or the thermostat switch is faulty. Sometimes the fan motor is supplied by a fused/relayed circuit in which case these items will also need to be checked. Check that not only does the top hose from the engine to radiator get hot but that the bottom one does too. If not this would indicate a blockage perhaps in the radiator core due to sludge. If full of sludge give both ends a flush out with a high pressure hose. Like wise do the same with the bottom hose back to the pump. If the water is circulating and the radiator fan is working then the normal cooling system is working as it should. f the engine is running hot one last thing is to find the EGR valve and check that it is opening as it should. If not the combustion temperatures go very high. One indicator of a hot engine is blue/glazed spark plugs so take one out and check it for signs of hot running. If hot then look to clean the EGR valve and associated exhaust gas feeder pipe with frayed cable, cloth and and carb cleaner spray.

May 05, 2010 | 1999 Oldsmobile Alero

2 Answers

3.0L The radiator fan will not come on. I have changed the fan, the engine temp sensor and radiator fan relay, cleaned the ground wire to top of the engine, what else is left ? i also don't understand why...


There are actually two switches in the cooling switch one is for the guage and one is for the fan. One is usually mounted near the thermostat housing and one is usually mounted in the block or in the end of the head near the thermostat housing. There is a fuse should be located in the main fuse panel. As far I know I have never seen one in line far the fan I have seen a ballist resistor hooked to the fan which is like a fuse, should be mounted near the fan itself and is white and about 3 inches long.

Oct 06, 2009 | 1993 Dodge Caravan

1 Answer

Cooling fan


Here are the cooling system diagnostic steps...First does the cooling fan kick on (with engine hot)? If not, check the fuse, if good then check the thermoswitch in the radiator (it's about an inch and a half in diameter located on the lower part of the radiator with two wires ) by disconnecting the wires and touching them together (again, with engine hot...at least 190 degrees) if the fan comes on, you have a bad switch. If not connect a 10 gauge jumper wire from the battery to the fan itself (there are three terminals,,, one high, one low and ground). With power direct from the battery (and a ground wire, if necessary) fan should run... if not replace the fan assembly... if it does run then you have a bad cooling fan relay (under the dash, I believe). Hope this helps... ;-)

Apr 19, 2009 | 1995 Volkswagen Passat

Not finding what you are looking for?
1994 Mercury Cougar Logo

276 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

fordexpert

Level 3 Expert

5546 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...