Question about 1995 Volkswagen Jetta

1 Answer

1994 jetta gl need timing marks location - 1995 Volkswagen Jetta

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,382 Answers

Hi, the timing marks are stamped into the steel pulley and flywheel and there should be a pointer attached to the engine. Degreasing the engine with GUNK and power washing it should uncover them.

I'm pretty sure it's crucial to have the engine timed to TDC as it relates to the end of compression/beginning of power stroke, and NOT the end of exhaust stroke.

With gas engines I do the following, to determine the TDC, by removing the #1 plug and insert a long straw, while turning the motor by hand watch for the maximum height of the straw, this will give you a TDC but knowing if its on the exhaust or compression stroke can only be determined if you were watching the closure of the intake valve indicating the begining of the next power stroke. Once you have this set look for the timing marks again. if you can't find them pick up a service manual at the library or autoparts store for photos and instructions.

Also check this site: http://forums.vwvortex.com
Take care

Posted on Aug 04, 2010

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
TDISLine
  • 1874 Answers

SOURCE: Diagram of timing marks for VW 1994 jetta 2.0 GL

The diagram of timing marks for VW 1994 jetta 2.0 GL

tdisline_477.jpg

Posted on Apr 28, 2011

  • 1 Answer

SOURCE: Timing Marks on VW Jetta GL 1995 2.0 Litres

timing belt marks

Posted on Apr 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Diagram of timing marks for VW 1994 jetta 2.0 GL


The diagram of timing marks for VW 1994 jetta 2.0 GL

tdisline_477.jpg

Apr 27, 2011 | 1994 Volkswagen Jetta

1 Answer

How do you clear the codes in a 1994 Jetta III GL (OBDI) without the scanner?


remove the battery terminal for about an hour, when you reconnect put key in and turn engine of a few times engine ecu should reset, but only if there are no actual faults. ( rate me thanks )

Aug 30, 2010 | 1994 Volkswagen Jetta

1 Answer

How to remove a clutch in a 96 vw jetta gl i dont know how


easy model to do but i have worked 13 hrs today then an hour on here and my back aches sat here ,if you remove the drive shafts then undo the bell housing bolts and gearchange then you can slide the gearbox back a bit so you have a gap of an inch and bit at the front and using a 9mm ring to undo the bolts one at a time its possible to drop the clutch ,then put the new one in and the bolts in loose you locate the clutch then tighten the clutch bolts through the timing mark hole as i remember rightly

May 27, 2010 | 1996 Volkswagen Jetta

1 Answer

I cannot get the timing marks on Crank and fly wheel alinged


to be honest it not as easy as it sounds to line them both up,,,,you may need to use a locking stud to do this,, and i have seen engines that just wont line up even to half a tooth out,,, but they run just fine anyhow, its all down to just how good the pullys were cut and marked

Feb 16, 2010 | 1994 Volkswagen Jetta

1 Answer

I need to take off the water pump on a automatic 1992 jetta...


If it's a 2.0L or 1.8l, you'll have to take off the timing belt. I'd suggest looking for a procedure on removing the timing belt and the water pump is under the distributor gear usually. Do NOT loose your marks, or else you can ruin the engine.

Jan 13, 2009 | 1992 Volkswagen Jetta

1 Answer

Place for a fuse in jetta gl 96


INSIDE THE COLUMN  RIGHT BEHIND THE STEERING WHEEL

Sep 15, 2008 | 1996 Volkswagen Jetta

2 Answers

Missing info in owner's manual


Hey mrgamejunk,

Found in Haynes manual (pg 2A-1)

The 1.8L is 90 HP
The 2.0L is 115 HP

Your turn, Rate this response a 'FixYa'

Thanks
Mike

Jul 23, 2008 | 1994 Volkswagen Jetta

Not finding what you are looking for?
1995 Volkswagen Jetta Logo

589 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8572 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...