Question about 2006 Ford Freestyle

1 Answer

Vehicle lurches forward while brake pedal is down, motor also shuts off while driving

Posted by on

  • Anonymous Aug 04, 2010

    Do you have a MIL Lamp lite in the dash. May look like a wrench symbol.

    If so, have a shop check for a code.

    Can not diagnose without vehicle,would just be quessing.

  • pj2t3978 Aug 04, 2010

    Gave codes to local dealership who said they could not mimic the codes, and could not find anything wrong with the vehicle. Said to bring it back when error codes returned. So far the have not returned, but still having same issues.

×

Ad

1 Answer

I'am not a fan of dealers,that's a personal thing and 45 years of experience.
That said, they have the same ability to diagnose your issues as a local repair shop.
The one reason I don't care for a dealer, is they never find anything, unless they pitch you, all kinds of preventative maintainance services,which in most cases,most people neglect and need.
Only then, do they start to diagnose, why you brought it to them in the first place.
Even without stored codes, you clearly stated the problem. I will bet they never even road tested it. Check you in and out milage, on your receipt.
If you have ongoing issues, why wouldn't any repair shop, want to keep the vehicle, and use it every time they went for parts,coffee etc.
There are scan tools and even 4 channel oscilloscopes,that can be hooked, to all sorts of sensors etc on your vehicle,and be used to collect freeze frame,live data and on and on.
Made my point.
IF, a shop wants to solve your problem,that is up todate with todays technology they can. May not be inexpensive on your end, but somebody will have to step up to the plate and face the challange,even if they give away billable hours.
I don't know what your problem is,but I know it's in the PCM data stream and believe, it is on the engine management side.

Posted on Aug 06, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What happen when.a 2005 Dodge won't. Move out of park


This usually means that your "brake safety switch" is faulty or got disconnected. There's a switch that gets pressed on when you press the brake to tell the computer your brakes are applied so that the car doesn't lurch forward/backwards when you put it in gear. The switch is located at the top of the brake pedal and is easy and cheap to replace.

Jun 11, 2014 | Cars & Trucks

1 Answer

2002 Lincoln LSE 3.9L 124,000 MI. stalls after a stop or hard braking.


Hi.
This may be a "sticky injector"

This would cause overfuelling - and a sudden rise in RPM. The ECU will see this and compensate - by shutting the injectors down lower - , which then stalls the vehicle.

Worth a try runnig cleaner through them.

Jul 10, 2008 | 2002 Lincoln LS

1 Answer

Brake problems 1997 oldsmobile achieva


I would suggest you have the front disk brakes inspected for warped power disk brake rotors, that is the common cause. They can be machined flat again in most cases.

Jun 17, 2012 | Oldsmobile Achieva Cars & Trucks

1 Answer

My car keeps lurching forward and cutting out when


try looking for an airleak in the hose from the inlet manifold to the brake reservoir,

Feb 25, 2010 | 1998 Volkswagen Golf

2 Answers

Jumps forward when brakes are applied at intersections when stopping Doesn't happen all the time.


I don't know if this would be considered a solution or not but in 2006 Ford implemented a new transmission (6 speed automatic) and they have and still have a lot of problems. It is fixed (helped may be more appropriate) by a computer upgrade done by the dealership. MY wife has had nothing but problems out of her 2006 limited ford explorer. The whole computer system had to be replaced at 32,000 miles and then they charged us to upgrade the new computer they put into the car. It's almost comical at this point. The transmission problem has been solved for the most part on our vehichle but it took several ford computer updates. I hope this helps!

May 29, 2009 | 2006 Ford Explorer

2 Answers

Idling to a stall or idling up to 3000rpm the lurches hard


i have the same car it was doing the same i change the mass air flow sensor now run like a brand new car but cost me arround 400$ but to make sure just buy the spray can to clean it you'l se if it run better or go for a scan in a car chop,I hope this gonna help you!...se ya!Patrick give me some news...

Apr 05, 2009 | 2001 Hyundai XG300

1 Answer

Rear lights will nt shut down when I turn my vehicle off


try pullin up on the brake pedal with someone behind to see if they go out it maybe your brake ligts and the switch for the pedal is out of adjustment

Dec 09, 2008 | 2005 Chevrolet Impala

Not finding what you are looking for?
2006 Ford Freestyle Logo

124 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...