Question about 2006 Pontiac Torrent
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2006 pontiac torrent
Hi, i know that the link is about a different car type then yours, but the principles are the same.
Then place your new battery, connect it & test that it's working.
If your radio is working, write down it's security code.
Hope this helps you,
Posted on Jun 11, 2008
HI, i would inspect the strut assembly for loose structure asap. i would also inspect the wheel knuckle and rotor and tie rod ends for loose fit as well. inspect thoroughly.
Its most likely the CV-joint assembly. the boot may have slipped off, allowing the joint assembly to dry up. i advise to inspect all the above before looking at the CV-half joint assembly and boot.
Posted on May 25, 2009
The fuse box is located under the hood. Look for a black plastic box under the hood. Open the top of the box to access the fuses. There is alos a fuse puller tool amoung the fuses in the fuse box. Consult your owner's manual for more info.
Posted on Aug 02, 2009
Open the hatch and look at the back of the brake light assembly, you will see 2 plastic disks with a little slot in the bottom, insert a flat screwdriver into the slots and pop these disks off, they pop off easily Under the disks are phillips head screws, remove both screws Now, you can't see them, but there are 2 pins built into the brake light assembly which extend into sockets in the body of the car, to remove the assembly, wiggle the entire assembly and push outward TO THE SIDE, NOT toward you, this will wiggle the pins free and the entire assembly will come free once the assembly is free you will see 3 plugs, the top 2 are the brake light bulbs, twist the plugs 1/4 turn and pull them out, now you can see the bulbs, just pull them out and replace them
Posted on Jan 09, 2010
Tips for a great answer:
Jan 19, 2016 | Pontiac Cars & Trucks
Dec 26, 2015 | Cars & Trucks
May 04, 2017 | Cars & Trucks
Aug 09, 2011 | 2006 Pontiac Torrent
Oct 25, 2010 | 2006 Pontiac Torrent
Mar 24, 2009 | 2003 Jeep Liberty
49 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: