Question about Nissan Maxima

Open Question

Cannot find coolant bleeder valve on 1999 nissan maxima

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 89 Answers

SOURCE: where is the bleeder valve for the master cylinder

i will assume that you are referring to the clutch master cylinder , you bleed the system at the clutch slave cylinder located on the transmission bellhousing

Posted on Nov 12, 2009

Ad
richardsimpl
  • 230 Answers

SOURCE: where is the radiator bleeder valve on a 98 nissan

Hi There
Ok you have to get part way under your car and you will see bleeder valve on the driver side or passenger side on bottom of the radiator. hope this helps you and let me know how it went.
Best Regards Richard

Posted on Dec 31, 2009

pappapumpdaf
  • 635 Answers

SOURCE: where is the bleeder valve on 04 nissan maxima

There are 2.
One is on the side of the master, and one is located on top of the slave. Some aftermarket slaves have them on the bottom.

Posted on Mar 07, 2010

  • 360 Answers

SOURCE: how do u bleed the

Most modern day front wheel drive vehicles have at least one (and sometimes, 2) bleeder screws. They are typically located at or adjacent to where the upper (and lower ) radiator hoses attach to the block. Open them slightly and start adding coolant...as air is forced out the liquid level will rise. When you get liquid from the bleeder screw, you can then close and tighten.

Posted on Feb 06, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 96 nissan maxima were is the bleeder valve to bleed the air out of the coolent?


it should be on the heater control valve up against the firewall

May 15, 2017 | 1996 Nissan Maxima

1 Answer

Does the 96 Nissan maxima have bleeder valve


Ya on the calipers. Maxima.org might help you better.

Sep 17, 2014 | 1996 Nissan Maxima

1 Answer

There's no bleeder valve on a 95 maxima how do you get the air out the coolant system. You can hear that bubbling sound in the heater core


park ur car facing uphill with the radiator cap off...gravity will work the air pockets out (with ur motor running) (but take the radiator cap off before it gets hot) that should take care of it. just keep filling it till the air is out.

Mar 31, 2012 | 1995 Nissan Maxima

1 Answer

Nissan maxima 1999 temprtr increase more than half ,when increase speed ( new ladator replaced also plugs) some times shutdown


Hi,
The problem would be the radiator is somewhat already blocked. The coolant cannot flow freely to the radiator to the engine.
I would recommend that you bring your car to the nearest garage/radiator shop and have them replace or repair the said problem.Ask the mechanic also to check the thermostat valve, sometimes the valve is stuck up and did not open up freely and made the coolant passage too small for a proper circulation.
The temperature gone up during high speed means that coolant did not circulate properly!
Hope that solves your problem.
Thanks for asking FixYa!

Jun 27, 2011 | 1999 Nissan Maxima

1 Answer

How do u bleed the lines to remove the air from the radiator on a 93 nissan maxima se dual overhead cam with the bleeder valve


Most modern day front wheel drive vehicles have at least one (and sometimes, 2) bleeder screws. They are typically located at or adjacent to where the upper (and lower ) radiator hoses attach to the block. Open them slightly and start adding coolant...as air is forced out the liquid level will rise. When you get liquid from the bleeder screw, you can then close and tighten.

Feb 06, 2011 | Nissan Maxima Cars & Trucks

1 Answer

1990 nissan maxima has no heat after changing thermostat and water pump AC works


make sure system is well bled of air. Open radiator cap and start engine. Run until hot and thermostat is open (coolant flowing in radiator. Keep radiator full and also open any bleeder ports on thermostat housing or in hoses until no air comes out.

Sep 26, 2010 | 1990 Nissan Maxima

1 Answer

WHERE DO I STRAT TO BL;EED BRAKES ON 95 NISSAN MAXIMA?


On either the front or back you should have a bleeder valve on the inside of the wheel drum or rotor Its usually a 5/16 loosen a bit till fluid leaks out and have someone slowly step on the brake pedal till hits the floor, tighten back up, pump the brakes, and repeat procedure until no more air comes out of bleeder valve.

Apr 04, 2010 | 1995 Nissan Maxima

1 Answer

Where is the bleeder valve on 04 nissan maxima


There are 2.
One is on the side of the master, and one is located on top of the slave. Some aftermarket slaves have them on the bottom.

Mar 07, 2010 | 2004 Nissan Maxima

2 Answers

Where is the radiator bleeder valve on a 98 nissan maxima


If you mean the drain valve it should be at the bottom back side of the radiator on the passenger side. (opposite side of the lower radiator hose)

Dec 31, 2009 | 1998 Nissan Maxima

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

255 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...