Question about Lexus GS 300

1 Answer

Where is the knock sensor located on the 1996 lexus es300

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,230 Answers

Hi there,

Well the Knock sensor is locate under the intake manifold and you may need to remove it to access the knock sensor. You may please follow the steps below to locate -
1. Park your Lexus on a level surface. Engage the parking brake and open the hood of the engine compartment.
2. Take a mirror and hold the mirror under the intake manifold so that you can see the engine block underneath it. The intake manifold is where the exhaust pipes join the engine block.
3. Shine your flashlight onto the engine block under the intake manifold and locate the knock sensor on that side. The knock sensor will be mounted to the engine block, near the middle of the block. It is round in shape and about two inches in diameter, with a wiring harness coming off the end. The sensor is screwed into the block. 

Good Luck!!

Thanks

Posted on Aug 04, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is crank shaft sensor location on 95 lexus sc300 please help


images for Where is crankshaft sensor location on 95 ...

eplaced engine on '97 SC300 now new engine does not have Crank ...

www.clublexus.com/.../633233-replaced-engine-on-97-sc300-now-new-...
May 4, 2012 - Location: arizona. Posts: 3 ... apparently 95-97s had an additional crank sensor. .... 1995 Lexus SC300 5spd Na-T ( TT Ecu Mod + a few others) 2jzge position sensor??
Nov 2, 2011
SC400 Crank Shaft Position Sensor. WHERE?????
Oct 11, 2011
SC300 No Spark
Oct 2, 2010
What happens if the Camshaft Position Sensor goes bad?
Jun 18, 2009
More results from www.clublexus.com

Lexus Crank Position Sensor ' LS400 SC300 ES300 GS300 ...

www.partsgeek.com > Crank Position Sensor > Lexus Parts & Accessories
Products 1 - 10 of 68 - 95 1995 Lexus LS400 Crank Position Sensor Denso NLA 7/13 ... 96 1996 Lexus SC300 Crank Position Sensor Denso Includes Pigtail.

Jan 27, 2016 | Lexus Cars & Trucks

1 Answer

Can you show me the picture of a knock sensor for harrier 1mz engine en how I can repair it


images for a knock sensor for harrier 1mz engine

2000 Lexus Es300 Knock Sensor - Location & Repair ...

? 2:20
https://www.youtube.com/watch?v=bDSmfxb1o1E
Jun 25, 2012 - Uploaded by RashaadRahh
2000 Lexus Es300 Knock Sensor Replacement - Location & Repair. ... Check engine light comes on and you ...

Jan 07, 2016 | Cars & Trucks

1 Answer

I have a 1996 lexus es300 that failed emissions with the following codes: P0100: Mass or volume air flow circuit; P0110:intake air temperature circuit P0135 02 sensor heater circuit (bank 1 sensor1) ...


what was the first code present. that one code will chain react the rest .clear them let them come back on and they will then compare the order

Oct 25, 2012 | 1996 Lexus ES 300

1 Answer

Where is the knock sensor located in 1999 lexus es300


the knock sensors are located underneith the intake manifold on either side of the engine block. you have 2 of them

Aug 31, 2012 | 1999 Lexus ES 300

1 Answer

LEXUS es300 oil light stays on oil level full


Check oil level sensor, replace if necessary. also, does your engine knock or make a tapping sound?

Mar 28, 2010 | 1994 Lexus Es 300

1 Answer

1996 Lexus ES300 replacing starter


the starter is in the wright side of the motor under the cruis controls. remove the black cover and youll see it....

Nov 07, 2009 | 1996 Lexus ES 300

2 Answers

92 lexus es300 knock sensor


Need to remove the upper and lower air intake manifold.  There are two knock sensors for the front and rear pistons banks.  If you plan to do this yourself it is about 1 to 2 hours.  While you are at it, there is a short coolant bypass hose sitting in the same spot, replace it.  Another problem with the knock sensor is the wire harness used to connect the two knock sensors into one connection sometimes wears out and contacts the metal on the engine causing false signals to the ECM, so replace this cable also.
Just did this last summer on my 99 ES300.  Pretty easy.
DIYr

Mar 01, 2009 | 1999 Lexus ES 300

3 Answers

Where is the Knock Sensor located on a 1994 Lexus ES300


  1. located on top of engine below intake manifoldgraphic.aspx?mod=reptiff&module_id=1&session_id=%7ba7aa889f-b7e3-42e1-9ece-3476a2533f69%7d&image_guid=95d24086&print_bw=0&

Jan 06, 2009 | 1994 Lexus Es 300

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

171 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexus Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

911 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...