Question about 2003 Toyota Camry

Open Question

The car is a V6 with VVT. It triggered a code po018 and multiple cylinder misfire. Oil light flickers. Crankshaft and both camshaft sensors have been replaced so is the oil pressure switch. Engine starts and runs a little poorly and will not idle.

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 713 Answers

SOURCE: What else would cause my '97 Tacoma 3.4L to be

yes you should have put an iridium plug in it or at least a double platinum, i do believe they came with iridium in them. but if it only dropping number 4 all the time sounds like an issue with just that cylinder more than likely a bad injector not supplying fuel to be burned which would cause a misfire.

Posted on Aug 31, 2009

Ad
  • 1374 Answers

SOURCE: 2006 RAV4 V6 multiple cylinder misfire, VSC, check engine and sli

You need a scanner to pull out the engine light codes.
Use a shopu manual to aid you with the diagnosis and repair.
The slip indicator and vsc light being on means these systems are not working. Once you pull the codes and do the repair and erase the codes the lights will go off.
There will be a code in there for the misfiring.
Good luck and keep me posted.

Posted on Mar 09, 2010

  • 14 Answers

SOURCE: where is the timing mark on crankshaft for 2005

check w/your dealer to find out if the arrows on your timing sprockets both go down go up or point at each other your crank has a keeper pin so you can only put the sprocket (gear) on one way. arrows facing out so you can see them.

Posted on Sep 08, 2010

SOURCE: 1998 Toyota T 100 6 cyl. 2 wheel drive Autozone

I would go with the ones autozone gave to you.then I would check the coil packs for those 2 cylinders and see if that's the problem. If that ain't the problem then I would check the crank sensor

Posted on May 26, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My truck sonoma gmc 2001 dont past the emission test


Definition of Diagnostic Trouble Code P1345 Audi: Ignition Coil Power Output Stage 3 Short to Ground BMW: Misfire Cylinder 2 with Fuel Cut-Off Buick: Crankshaft Position (CKP)-Camshaft Position (CMP) Correlation Cadillac: Crankshaft Position (CKP)-Camshaft Position (CMP) Correlation Chevrolet: Crankshaft Position (CKP)-Camshaft Position (CMP) Correlation Ford: Cylinder Discrimination Signal (Signal From Camshaft Position Sensor) GMC: Crankshaft Position (CKP)-Camshaft Position (CMP) Correlation Isuzu: Crankshaft Position - Camshaft Position Correlation Kia: No SGC Signal (1.6L) Lexus: Variable Valve Timing / CMP Sensor Range / Performance Lincoln: Cylinder Discrimination Signal (Signal From Camshaft Position Sensor) Mazda: Cylinder Discrimination Signal (from CMP sensor) Mercury: Cylinder Discrimination Signal (Signal From Camshaft Position Sensor) Oldsmobile: Crankshaft Position (CKP)-Camshaft Position (CMP) Correlation Pontiac: Crankshaft Position (CKP)-Camshaft Position (CMP) Correlation Saturn: Crankshaft Position (CKP)-Camshaft Position (CMP) Correlation Toyota: Variable Valve Timing / CMP Sensor Range / Performance Volkswagen: Ignition Coil Power Output Stage 3 Short to Ground

Jul 19, 2015 | GMC Cars & Trucks

1 Answer

Check engine light code p2196,p2197, po300 ,304,305,306,p2 ,Im freeking out.


P0300 Random/Multiple Cylinder Misfire Detected P0301 Cylinder 1 Misfire Detected P0302 Cylinder 2 Misfire Detected P0303 Cylinder 3 Misfire Detected P0304 Cylinder 4 Misfire Detected P0305 Cylinder 5 Misfire Detected P0306 Cylinder 6 Misfire Detected P0307 Cylinder 7 Misfire Detected P0308 Cylinder 8 Misfire Detected P0309 Cylinder 9 Misfire Detected P0310 Cylinder 10 Misfire Detected P0311 Cylinder 11 Misfire Detected P0312 Cylinder 12 Misfire Detected P0313 Misfire Detected with Low Fuel P0314 Single Cylinder Misfire (Cylinder not Specified) P0315 Crankshaft Position System Variation Not Learned P0316 Misfire Detected On Startup (First 1000 Revolutions)

Read more at: http://www.obd-codes.com/trouble_codes/
Copyright © OBD-Codes.com
-----------------------------------------------------------------------
P2195 O2 Sensor Signal Stuck Lean Bank1 Sensor 1 P2196 O2 Sensor Signal Stuck Rich Bank1 Sensor 1 P2197 O2 Sensor Signal Stuck Lean Bank2 Sensor 1 P2198 O2 Sensor Signal Stuck Rich Bank2 Sensor 1

Read more at: http://www.obd-codes.com/trouble_codes/
Copyright © OBD-Codes.com http://www.obd-codes.com/p0002

May 07, 2015 | 2006 Ford Taurus SEL

1 Answer

2008 f250 5.4 3 valve no codes no flashing SES lightruns with bank 2 completely dead does not hit on 5 6 7 8 cylinders


Timing chain possible . But more likely Camshaft Phaser for the variable valve timing , do you change you oil regularly ,these can get clogged up . They are controlled by oil pressure.
Variable Camshaft Timing (VCT) System The VCT system consists of an electric hydraulic positioning control solenoid, a camshaft position (CMP) sensor, and a trigger wheel. The CMP trigger wheel has a number of equally spaced teeth equal to the number (n) of cylinders on a bank plus one extra tooth (n+1). Four cylinder and V8 engines use a CMP 4+1 tooth trigger wheel. V6 engines use a CMP 3+1 tooth trigger wheel. The extra tooth placed between the equally spaced teeth represents the CMP signal for that bank. A crankshaft position sensor (CKP) provides the PCM with crankshaft positioning information in 10 degree increments. The cam timing can become advanced to much an cause a low compression problem. You could do a compression test an that would tell you. this vehicle should have at lest 150 psi .

Jan 20, 2015 | Cars & Trucks

1 Answer

What is code p0300?


P0300 - Random, Multiple Cylinder Misfire Detected Fault Code Definition
  • Random, Multiple Misfire Detected
Symptoms
  • Check Engine Light flashing
  • Rough running, hesitation, and/or jerking when accelerating
  • In some cases, there may be performance problems, such as dying at stop signs or rough idling, hesitation, misfires or lack of power (especially during acceleration), and a decrease in fuel economy
Common Problems That Trigger theP0300
  • Worn out spark plugs, ignition wires, coil(s), distributor cap and rotor (when applicable)
  • Incorrect ignition timing
  • Vacuum leak(s)
  • Low or weak fuel pressure
  • Improperly functioning EGR system
  • Defective Mass Air Flow Sensor
  • Defective Crankshaft and/or Camshaft Sensor
  • Defective Throttle Position Sensor
  • Mechanical engine problems (i.e.-low compression, leaking head gasket(s), or valve problems

Jul 25, 2014 | 2000 Dodge Durango

2 Answers

Why the loss of power and po300 code?


HARD TO SAY WITH OUT BEING THERE BUT THIS MIGHT HELP .
Crankshaft sensor Was the trouble with my 99 Chevy truck after replacing many components like coil cap rotor wires and so on .
http://www.obd-codes.com/p0102 Code P0300 Causes and Fixes Code p0300 is a code that is generated when your engine has a misfire that is not related to only one cylinder. Sometimes this code will be set in addition to other codes such as p0301 which means that there is a misfire on cylinder 1 (cylinder 1 is the number one cylinder when looking at the firing order. It is generally the forward most cylinder on the engine.). If these engine codes are present as well the you should diagnose those first as they are probably causing code p0300.
This code will set your check engine light and needs to be fixed as soon as possible. If it is not then you will probably need to replace your catalytic converter as well as the problem that is causing your misfire.
There are many causes for this obd code. Since it is a "random misfire" or "multiple misfire" this means that the misfire is on different cylinders and not just one all the time.
Common Causes
  • Low Fuel Pressure
  • Vacuum Leak
  • EGR system malfunction
  • Internal Engine Problems (such as low compression)
Less Common Causes
  • Faulty Coil
  • Faulty Spark Plugs and/or Wires
  • Camshaft or Crankshaft sensors
  • Ignition module
  • Computer

Jun 12, 2014 | 1998 Chevrolet Tahoe

2 Answers

05 kia amanti with diagnostics codes p0350,p0320,p0300,p0302,p0303,p0304,p0305,p0306.skipping at times.when it does skip & misfire the rpm gauge goes crazy.this problem is not consitant


Generic OBD II Diagnostic Trouble Codes

DTC CODES P0300 to P0399

P0300....Random/Multiple Cylinder Misfire Detected

P0301....Cylinder 1 Misfire Detected

P0302....Cylinder 2 Misfire Detected

P0303....Cylinder 3 Misfire Detected

P0304....Cylinder 4 Misfire Detected

P0305....Cylinder 5 Misfire Detected

P0306....Cylinder 6 Misfire Detected

P0307....Cylinder 7 Misfire Detected

P0308....Cylinder 8 Misfire Detected

P0309....Cylinder 9 Misfire Detected

P0310....Cylinder 10....Misfire Detected

P0311....Cylinder 11 Misfire Detected

P0312....Cylinder 12 Misfire Detected

P0313....Misfire Detected with Low Fuel

P0314....Single Cylinder Misfire (Cylinder not Specified)

P0320....Ignition/Distributor Engine Speed Input Circuit

P0321....Ignition/Distributor Engine Speed Input Circuit Range/Performance

P0322....Ignition/Distributor Engine Speed Input Circuit No Signal

P0323....Ignition/Distributor Engine Speed Input Circuit Intermittent

P0324....Knock Control System Error

P0325....Knock Sensor 1 Circuit (Bank 1 or Single Sensor)

P0326....Knock Sensor 1 Circuit Range/Performance (Bank 1 or Single Sensor)

P0327....Knock Sensor 1 Circuit Low Input (Bank 1 or Single Sensor)

P0328....Knock Sensor 1 Circuit High Input (Bank 1 or Single Sensor)

P0329....Knock Sensor 1 Circuit Input Intermittent (Bank 1 or Single Sensor)

P0330....Knock Sensor 2 Circuit (Bank 2)

P0331....Knock Sensor 2 Circuit Range/Performance (Bank 2)

P0332....Knock Sensor 2 Circuit Low Input (Bank 2)

P0333....Knock Sensor 2 Circuit High Input (Bank 2)

P0334....Knock Sensor 2 Circuit Input Intermittent (Bank 2)

P0335....Crankshaft Position Sensor A Circuit

P0336....Crankshaft Position Sensor A Circuit Range/Performance

P0337....Crankshaft Position Sensor A Circuit Low Input

P0338....Crankshaft Position Sensor A Circuit High Input

P0339....Crankshaft Position Sensor A Circuit Intermittent

P0340....Camshaft Position Sensor 'A' Circuit (Bank 1 or Single Sensor)

P0341 Camshaft Position Sensor 'A' Circuit Range/Performance (Bank 1 or Single Sensor)

P0342....Camshaft Position Sensor 'A' Circuit Low Input (Bank 1 or Single Sensor)

P0343....Camshaft Position Sensor 'A' Circuit High Input (Bank 1 or Single Sensor)

P0344....Camshaft Position Sensor 'A' Circuit Intermittent (Bank 1 or Single Sensor)

P0345....Camshaft Position Sensor 'A' Circuit (Bank 2)

P0346....Camshaft Position Sensor 'A' Circuit Range/Performance (Bank 2)

P0347....Camshaft Position Sensor 'A' Circuit Low Input (Bank 2)

P0348....Camshaft Position Sensor 'A' Circuit High Input (Bank 2)

P0349....Camshaft Position Sensor 'A' Circuit Intermittent (Bank 2)

P0350....Ignition Coil Primary/Secondary Circuit

Nov 17, 2010 | Kia Amanti Cars & Trucks

2 Answers

Misfire was detected on the cylinder 6 and now it says random multiple misfire when you rev up the engine on my 98 chevy camaro v6 3.8liter


I had that type of problem and after much diagnosis they found that the crank sensor was slightly dislodged.

Jul 16, 2010 | Cars & Trucks

2 Answers

Toyota ipsum 2002 check light comes on with code P1346.


Definition of Diagnostic Trouble Code P1346 Audi: Ignition Coil Power Output Stage 3 Short to B+ BMW: Misfire During Start Cylinder 3 Buick: Intake Camshaft Position [CMP] Sensor System Performance Cadillac: Intake Camshaft Position [CMP] Sensor System Performance Chevrolet: Intake Camshaft Position [CMP] Sensor System Performance Ford: Fuel Level Sensor B Circuit GMC: Intake Camshaft Position [CMP] Sensor System Performance Lexus: VVT Sensor Rang/Performance Problem (Bank 1) Lincoln: Fuel Level Sensor B Circuit Mazda: Fuel Level Sensor B Circuit Mercury: Fuel Level Sensor B Circuit Oldsmobile: Intake Camshaft Position [CMP] Sensor System Performance Pontiac: Intake Camshaft Position [CMP] Sensor System Performance Saturn: Intake Camshaft Position [CMP] Sensor System Performance Toyota: VVT Sensor /Camshaft Position Sensor Circuit Range/ Performance Problem (Bank 1) Volkswagen: Ignition Coil Power Output Stage 3 Short to B+

Mar 12, 2010 | 2001 Toyota Sienna

2 Answers

01 3.9l ram 1500 wont start p0300, p0301, p0303, p0306, p0340, p0455 showing


all the 300's are multiple misfire (300) 301 is misfire at cyl#1, 303 is cyl#3, etc. 340, is camshaft position sensor malfunction, and 455 is a Leak in your evaporative emission control system, Fairly large one.

Check all your vacuum lines running through it, as well as gas cap is good.
My guess is to, that once Camshaft sensor is replaced, all those misfires will be gone as well.

Jan 07, 2010 | 1997 Dodge Ram 1500 Club Cab

2 Answers

A p0011 code and camshaft sensor replacement did not cure problem


well i know on the v6 that is true you replaced all of them. Not sure of 4 cyl but seems like it should be the same. Also I know on the v6 the variable valve timing set up sometimes did some weird failures triggering a cam sensor code. It could be anything from sludgy oil hanging up in the vvt hub or clogged passages or bad solenoids. but before going into all that(well besides maybe an oil change) I would go for the crank sensor.

Apr 06, 2009 | 2002 Nissan Altima

Not finding what you are looking for?
2003 Toyota Camry Logo

Related Topics:

141 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...