Question about 2004 Honda Odyssey

1 Answer

I replaced the battery and now cannot activate the radio. When I turn it on, the letters CODE appear in the display. How do I get past this? Thanks.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 327 Answers

Please read the owners manual its in there if you are near a dealer they will help you for free usually hope this helps

Posted on Aug 04, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where do i find my activate code for my anti-theft radio


Take to the dealer, they will need the vin to be able to give you the code. Play their game, "wouldn't you like to find a replacement".

Apr 15, 2015 | 2000 Volkswagen Beetle

1 Answer

Unlocking gateway theft deterrent


go to the dealer
  1. Turn ON the ignition, with the engine OFF.
  2. Turn ON the radio.
Does the radio display LOC?
Is the security code known?
  1. Turn ON the ignition, with the engine OFF.
  2. Press and hold the radio preset buttons 2 and 3 for approximately 8 seconds until the first 3 digits of the backup code are displayed on the radio.
  3. Record the displayed code.
  4. Press and hold the AM/FM push button until the second 3 digits are displayed on the radio.
  5. Record the displayed code.
Could you successfully extract the code?
Contact Delco Electronics in order to give them the backup code information and to obtain an unlock code.
Did you complete the action?
Important:: If 8 unsuccessful tries are made to unlock the radio, the display will return to the LOC display, but when the SET button is pressed, INOP will be displayed. This means that the radio must be left powered up for 1 hour with the battery and the ignition applied before any more attempts to unlock the radio can be made. Anytime INOP is displayed, 3 more attempts will be allowed after the 1 hour waiting period with the battery and ignition applied.
  1. Ensure that the code to be used is correct.
  2. Turn ON the ignition, with the engine OFF.
  3. Press the MN button until 000 is displayed.
  4. Press and hold the HR button until the first 2 digits agree with the code.
  5. Press and hold the MN button until the last 2 digits agree with the code.
  6. Press the AM/FM button when the complete code is displayed. If REP appears on the display, repeat this step.
Did you successfully complete the action?
Replace the radio. Refer to Radio Replacement.
Did you complete the replacement?
Operate the system in order to verify the repair.
Did you complete the repair?

Apr 03, 2014 | 2001 Chevrolet S-10

1 Answer

The radio is locked on a 1995 oldsmobile 88


How to Unlock a Chevy Radio Step 1: Start the vehicle and turn on the radio.
Step 2: Press and hold preset numbers 2 and 3 until a three digit code appears on the radio display. Write this code down.
Step 3: Press the AM/FM button. Your radio will display a second three digit code. Write the second code down. You will now have a six digit code.
Step 4: Call the Chevy Radio Code phone line at 1-800-537-5140.
Step 4: Enter 106010 followed by the # key to direct you to the radio code retrieval system.
Step 5: Enter the six digit code you retrieved in steps 2 and 3 followed by the * key. They must be in order. You will be given a four digit radio code. Write down the radio code.
Step 6: Start your vehicle and turn on the radio. Using the Minute and Hour buttons, enter in the four digit radio code to your stereo system. Press the AM/FM button to unlock your stereo.
How to Unlock a GM Radio Step 1: Start the vehicle and turn on the radio. The radio will display "LOC" indicating the Theftlock system is activated.
Step 2: Press and hold preset buttons 1 and 4 for ten seconds. (If you don't have a fourth preset button, press and hold presets 2 and 3.) The radio will display a three digit number. Write this number down.
Step 3: Press the AM/FM button. Your radio will display a second three digit code. Write the second code down. You will now have a six digit code.
Step 4: Contact your local GM Dealer and give them the six digit code. They will give you a four digit radio code.
Many dealers will give you your radio code for free, while others may charge a small fee. If your dealer is charging a larger fee, consider calling another dealer or doing a Google search for sites offering GMC Radio codes. They usually charge a small (around $10) fee.
Step 5: Start your vehicle and turn on the radio. Press the Hour button on the radio until the first two number of the code appear. Next, press the Minute button until the last two numbers of the code are displayed. Once all four digits appear, press the AM/FM button to unlock your stereo. The display will read "SEC" indicating you have successfully unlocked your radio and it is fully operational.
If radio display reads "INOP" while the vehicle is on, too many incorrect radio codes have been entered. To remove "INOP" from your display and unlock your radio, you must leave the key in the On position for one hour. Once you've retrieved your radio unlock code, write it down for future use. Your radio code will not change and having it handy will save from going from the radio code retrieval process again.

Jan 30, 2014 | Cars & Trucks

1 Answer

I cannot find the ARI-Z button to my car delta car radio. the instruction is press the am button simultaneuosly with the ARI-Button. where is the ARI-Z button in the delta radio? tnxs


Audi Delta CC Radio

tdisline_914.jpg
Please perform the following procedures while the car is parked. Otherwise you risk getting into an accident while your attention is not focused on the driving. Entering anti-theft code The following is the procedure to re-activate the radio if the display shows "SAFE". It is important that the procedure be followed in the correct order.
  1. Turn on radio. The radio display shows "SAFE".
  2. Press the FM1/2 and DX buttons simultaneously and hold until "1000" shows on the display. Release the buttons. Do NOT press these buttons again, otherwise the radio will consider "1000" to be the code.
  3. Use Preset buttons 1 ... 4 to enter the four-digit code number from your radio card. Preset button 1 corresponds to the first digit, Preset button 2 corresponds to the second digit, etc. Each press of the button increments the number by 1.
  4. Once the code shown on the display is correct, press the FM1/2 and DX buttons simultaneously and hold until the word "SAFE" appears in the display, then release the buttons.
  5. The radio should unlock and be usable shortly afterwards.
  6. If an incorrect code is entered, the word "SAFE" appears, first flashing and then continuously. You can repeat the above steps to unlock the radio once more, the number of attempts will be shown in the display. If an incorrect code is entered again, you radio will be locked for about one hour. After one hour - the radio must stay on and the key must remain in the ignition lock - if the display goes out, the you can repeat the above procedure to unlock again. The cycle - two attempts, one hour lock-up - still applies.
  7. If you lose your radio code, contact your Audi dealer.

Other Preferences & Configurable Options The following is the procedure on how to access some other preferences that you may set in the Audi Delta CC radio.
  • GALA and Turn-on Volume Settings

    1. Turn off radio.
    2. While pressing and holding the TP button, turn on radio. "GALA" will be shown in the display.
    3. To select the speed at which GALA activates, press the tuning up (up-arrow) or tuning down (down-arrow) buttons to the left of the volume control knob. The display shows the following:

      __' Highway speed
      _'_ City speed
      '__ Slow speed

    4. To save the setting, press both the tuning up and tuning down buttons simultaneously. "GALA" disappears.
    5. Press the TP button briefly, "VOL" appears in the display.
    6. To increase or decrease the turn-on volume, press the tuning up or tuning down buttons.
    7. To save the setting, press both the tuning up and tuning down buttons simultaneously. "VOL" disappears.

    To activate GALA, push the Treble control knob to let it spring out. Then, pull it out one more detent, and then turn the knob to the right. To deactivate GALA, do the same except turn the knob to the left. Push the knob back in when you're done.

Oct 05, 2011 | 2001 Audi A4

1 Answer

Radio will not work after replacement of battery---what's wrong--it was working before the replacement


radio may need a radio code to re activate. if SAFE appears on the display then this is the problem.you would need to get a code from a VW dealer.

May 15, 2010 | 1997 Volkswagen Golf

3 Answers

CHANGED BATTERY AND NOW THE RADIO WILL NOT WORK. ONLY THING THAT COMES UP IS CODE 1,2,3,4,5,6


ur anti-theft deterrent has activated on ur radio and is locked need to notify a dealer the code is part of vehicles security system and dealer has code ---call first or if have owners manual either will advise how to retrive radio id number which is needed

Feb 01, 2010 | 2003 Honda Civic

1 Answer

2000 GMC Safari, lost power to the vehicle. The radio did disply 'loc' and now displays 'InOP'. Please Help


Hi

Thanks for using FixYa. If you fail to enter the correct code eight (8) times, the radio goes into INOP mode. You have to wait an hour with the ignition on before the radio returns to LOC mode (go for a long drive somewhere).

After that the the radio will go to LOC mode, then follow this procedure to unlock it—

To unlock the car radio - Have a pen and paper ready. Push and hold stereo preset buttons 2 and 3 simultaneously for several seconds. Three digits will appear in the display "XXX", write them down. Push the AM/FM button, three more digits will appear in display "YYY", write them down.

Press 1 then # (pound). You’ll hear “Invalid Code, try again”

Press 139010 then # (pound). You will be asked to enter your four or six digit code followed by * (start)

Enter the six didgit number obtained from above procedure.

Listen to the four-digit number and write it down. It will be repeated twice

Turn the ignition ON (The radio displays LOC)

Use the MN and HR buttons to enter the $ digit code that you have heard.

Press the AM/FM button. The radio display changes to SEC. Your radio is now “un-locked” and usable. The Theft-Deterrent feature is STILL active! If you want to disable it, use the instruction in Owner’s manual.


Please do accept the solution if the issue is resolved or else revert for further assistance.


Thanks

Rylee

Oct 13, 2009 | 2000 GMC Safari

1 Answer

Problem with entering anti-theft radio code for Honda Fit: The radio screen says: "Enter Code:" I enter the confirmed correct code, but when doing so when the actual code (all numbers) turn into letters or...


when you use the "preset keys" (the keys on the radio with numbers on them) to enter the code, each time you press a code number, a letter appears [c, o, d, e]. once the word is spelled out, from entering the correct 5 digits, the radio is reset, ready to go.

BUT if you miss a number, enter a wrong number, whatever, each number pressed, still makes a letter appear from the word "code". once the word is spelled out, by entering ANY 5 numbers, if ANY of the 5 is wrong, the radio displays a message "Error" and then a number 1 thru 10.

When you see the word "Error..."

the next preset button you push, starts the whole thing over again. The radio says "Enter code". That is when you enter the 1st of the 5 digits, the letter C appears, enter the next digit, the letter O appears, enter the next digit, the letter D appears, enter the last digit, the letter E apperas, the radio is reset, ready to go, if you got the 5 correct numbers entered.

you have 10 chances to enter the right 5 digit code. Each wrong try of 5 digits yeilds a display of "Error 1", "Error 2", "Error 3", etc 'till you get to 10 incorrect tries of 5 digits each.

If you dont get it right in 10 tries, you have to leave the radio "on" for an hour, then it will let you start the 10 tries over again.

Good luck!

Apr 26, 2009 | 2007 Honda Fit Sport Hatchback

2 Answers

How to retrieve current radio code for my 2004 chevy aveo?


Here's an easier way. Purchase a 9 volt battery powered radio / computer MEMORY RETAINER. Plug into your cigarette lighter/power socket SECURELY. AFTER replaceing the battery, remove 9 volt poer feed, and BINGO. Radio stations memory, clock will all RETAIN. their memory. Hope this helps

Apr 19, 2009 | 2006 Chevrolet Aveo

11 Answers

2005 Honda accord radio code


I have a 2005 accord, and this worked for me.

1)Turn on engine w/ radio off. Push and hold down buttons 1, 6, and power.
2)I got the letter "U" followed by 4 numbers and then letter "L" followed by 4 numbers; write down those numbers.
3) Go to Honda.com
4)Click on Owners home link.
5)On that page you should see an option for retrieving radio codes for honda/acura
6)you will need to enter Vin#, home phone number and zip code fo the original owner. This will then give you the radio code..

Jun 19, 2008 | 2005 Honda Accord

Not finding what you are looking for?
2004 Honda Odyssey Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Marvin
Marvin

Level 3 Expert

81400 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22359 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...