Question about 1996 Honda Accord

1 Answer

My turn flasher stopped working afta having my 96 accord just over 9 years, I've bought a new one , but doesn't fit....I don't know what I have to get for it to fit properly!!! =c plz help! I'm a female and not totally dumb with cars, esp my own, but dis has almost driven me insane, cuz I dont' know what else to do!!

Posted by on

  • iranbanoo Aug 05, 2010

    No the light bulbs are working fine. its the electronic signal flasher thats stopped working (3pin). im the original poster of this problem....still have the problem =c I dont drive my car around as I'm accident prone, due to no flashers.....so I'm really stuck!

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

What exactly did you buy a new one of...the light bulb? The light bulb is presumably the first thing to check when the flasher stops working. So drive yourself to a Hinda service place, take the flasher light bulb out, walk into the parts dept with the bulb and tell them you need a new one (and show them)...that way you know you get the correct on. When you get the new one, make sure it matches the one you removed. Go back to car, and replace the old one with the new on. If you take the bulb out and check it and it appears that it isn't blown, then check to see if your car has a fuse that is specifically for the blinker on the side that isn't working. (your manual should have a diagram of your fuse box...what fuse is where and what the fuse operates, as should the inside of your fuse box cover).

Posted on Aug 04, 2010

  • iranbanoo Aug 05, 2010

    No the light bulbs are working fine. its the electronic signal flasher thats stopped working (3pin).

  • VdubbauVW Aug 06, 2010

    did you check the fuse?

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My turnsignals dont work on my 1987 honda accord flashers do work


flashers and turn signals have separate flasher and separate fuse.

Mar 14, 2016 | Honda Cars & Trucks

1 Answer

HAZARD AND TURN SIGNAL LIGHTS WILL NOT WORK


Turn signals and flashers not working - MyTractorForum.com - The ...

www.mytractorforum.com/.../193023-turn-signals-flashers-not-working....
Jun 5, 2011 - My turn signals and flashers are not working on my BX1500. I can hear the ... I hear nothing when I depress the hazard button and no light.

Turn Signal and Flasher Repair JD4300 Recovered Part 7 ...

? 19:17
https://www.youtube.com/watch?v=UrLN5xzbOzY
May 9, 2014 - Uploaded by mars1952
Turn Signal and Flasher Repair JD4300 Recovered Part 7 ... I bought a 4310 new in 2004 and I know these are great tractors, not the ... I have a John Deere 4400 and I wouldn't mind putting a set of those on it to protect the lights. .... Ford Explorer 2003 - MyTurn Signals Stopped Working - Duration: 2:15.

Jan 11, 2016 | Cars & Trucks

1 Answer

My turn signals don't work and I've checked the bulbs, fuses & flasher.


About all that is left on the list is the turn signal switch.
Do you have power in and out of the switch ?

Feb 04, 2013 | 1995 Buick Skylark

2 Answers

Turn signals in my 98 Toyota Camry don't blink. And the the front passenger window doesn't work. Niether does the car lamp inside the car.


If just one window doesn't work, that is a separate issue, and probably a bad motor for that window. The inner door panel would have to be removed to investigate if it is the motor or a wire not connected.
For the radio and lights, all I could say is check the fuses.
For the blinkers try a new flasher. I've never heard this before, you must be pretty adept at it by now. Wiggling it to make it work means either the connection is poor or the flasher has a foot ******- Replace it!

Jun 17, 2012 | 1998 Toyota Camry

1 Answer

I cant locate the turn signal flasher


Lots of Fords were built with turn signal flashers and on different years and models they put them in differsbt plaCES. The most modern ones with the hazard flasher switch in the middle of the dash the flasher is in the hazard switch. You have to replace the switch to replace the flasher. I've found that punching the hazard switch on and off with the car running and the trun signal on that some of them start working asgain. Parts stores have some of them others have to be bought atr the dealer. If the car as preety new I've got most of them to work some just by turning them on and off many times.

Aug 09, 2011 | Ford Mustang Cars & Trucks

1 Answer

The directional signals in my car stopped working. I don't begin to know what fuse to change...can you please help me Thank you


if the signals stopped working, ( yet they light up, just don't flash) then its not a fuse you need, its a flasher unit, the flasher is a 3 prong, square unit that is located just above the emergency break pedal on the inside face of the lower dash panel. To replace this flasher you should start by removing the 2, 9/32" bolt head retaining screws holding the black access panel just above the break pedal. Lay down on your back and look up inside the dash. You may find the round hazard flasher high just above your head, this is not it. Stick you hand up along the panel in front of the emergency break pedal just behind the trunk release button. Locate with your hand a 2 inch long square relay box and move it to unhook it from it's clip. (If the flasher is the factory flasher it will have a metal clip retaining it under the dash. Your new part will not have this clip.) Route the old flasher and wire down so that it hangs from under the dash. Now you can see it and disconnect it. There are multiple connectors, but only three of them line-up and actually have metal receptors inside the socket. Take note of the removal of the flasher so you are not confused during reinstallation. I think the other connectors are for additional features not needed in the US. Take the part to the parts store or just replace with new one. Relocate the flasher safely up in the dash in relatively the same place and make sure it won't move around. return the black panel to its position above the break pedal and replace the 2, 9/32" retaining screws. Delco part #3548813

Jul 29, 2011 | 2004 Cadillac Deville

1 Answer

BLINKERS JUST STOPPED WORKING


most of these cars have a short in the rear sockets. Here's a few other things you can check. If your hazard's don't work either?, check the flasher relay. If they do? then your rearview sockets are bad, cut them off from the wires, pick up another socket with wires from your nearest junkyard, splice in using two brand new bulbs and use the electronic connector Grease, the sell @ autozone.

Dec 28, 2008 | 1996 Honda Accord

Not finding what you are looking for?
1996 Honda Accord Logo

117 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...