Question about 1999 Oldsmobile Alero

1 Answer

I have a 1999 oldsmobile alero. I have gotten to the ignition switch and pulled the two, one white and one black connectors out and now I can't get the black cord out of the back that goes to the parking. The ignition is stuck in off by the way. Also there is a cord in the front with two little wires running to it. Please help me figure out how to do this. Thank you

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Oldsmobile Master
  • 14,036 Answers

DISCONNECT THE IGNITION SWITCH ELECTRICAL CONNECTORS AND THE IGNITION INTERLOCK CABLE.TO DISCONNECT THE ELECTRICAL CONNECTORS.THEN PUSH IN THE TAB TO RELEASE THE THE INTERLOCK CABLE.THE [ TWO WIRE CONNECTOR] CAN BE DISCONNECTED WHEN THE LOCK CYLINDER IS REMOVED.USING THE KEY TURN THE LOCK CYLINDER TO RUN AND PRESS IN THE PIN TO RELEASE THE CYLINDER THEN WITHDRAW THE CYLINDER WITH THE KEY.

Posted on Aug 06, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the starter relay for a 1999 Oldsmobile alero


Your alero has no starter relay . The starter circuit on this vehicle goes from ignition switch to the park neutral safety switch to the S terminal on the starter solenoid . Check battery cable connections ,no corrosion . Check for battery voltage at the S terminal with someone trying to crank the engine over .

Aug 12, 2015 | Oldsmobile Cars & Trucks

1 Answer

How do you hotwire a 2002 olds alero


Get a wiring diagram and colors will be shown.

Jan 16, 2015 | 2002 Oldsmobile Alero

1 Answer

How to remove shifter


If your Alero is an automatic, look for a black, U-shaped clip inside the front of your shift handle. Pull it out with needle-nose pliers, then just slide the shifter off. It's a common problem for '99 Olds Aleros. Best wishes!

Oct 07, 2014 | 1999 Oldsmobile Alero

1 Answer

My 1999 oldsmobile alero will not turn off, engine is off but battery is not. I unhooked my battery so it wouldn't drain it and now it wont turn over.


car wont turn off the ignition switch is broken more likely if you could not turn off car and now car wont crank.sound like problem could be in the ignition switch.

Nov 17, 2011 | 1999 Oldsmobile Alero

1 Answer

Instructions how to step by step replace ignition lock cylindor for an 1999 oldsmobile intrigue


1999 Oldsmobile Intrigue

IGNITION SWITCH AND LOCK CYLINDER REPLACEMENT

1. Disconnect battery
2. Disable Supplemental Restraint System (Airbags)
3. Remove traction control switch from rear of center console plate
4. Open console lid and remove screws at front of console
5. Pull console plate up to release clips and slide over shifter
6. Pull rearward to release clips retaining instrument panel accessory trim plate to instrument panel
7. Remove screws attaching radio to instrument panel
8. Disconnect electrical connectors and remove radio
9. Take down instrument panel hush panels and disconnect courtesy lights. Remove hush panels
10. Remove knee bolster and knee bolster bracket from driver's side below steering column
11. Remove screws from IPC trim plate
12. Pull out instrument panel cluster trim plate to release from retainers
13. Remove trip odometer and reset switch from IPC trim plate
14. Remove IPC trim plate
15. Remove screws from IPC and pull IPC out
16. Disconnect electrical connectors from IPC and remove IPC from the instrument panel
17. Disconnect ignition switch connectors
18. Turn ignition switch to the ACC position and remove park lock cable from ignition switch
19. Turn ignition switch to ON position
20. Depress and hold locking tab on right side of ignition switch with a small, flat-bladed screwdriver and pull ignition lock cylinder from ignition switch
21. Remove ignition switch bezel from ignition lock cylinder
22. Remove screws attaching ignition switch to bracket
23. Remove ignition switch through the IPC opening
24. To install, reverse procedure

Apr 04, 2011 | 1999 Oldsmobile Intrigue

1 Answer

I bought a used 99 alero. the security light keeps coming on and prevents the car from starting for 10 minutes


KEYS WORN OUT OR IGNITION SWITCH AND BCM IF FAILING.THE DEALERSHIP HAS TO FIX.BECAUSE NEW KEYS AND IGNITION SWITCH OR BCM.HAS TO BE REPROGRAMMED BEFORE CAR WILL CRANK.

Sep 28, 2010 | 1999 Oldsmobile Alero

1 Answer

Installing a new radio, how do I remove the old radio?


Here's the basics..Same as a grand am if you've done one of those..Let me know if you need any other info.

-----------------------------------------
Driver underdash. Harness going into firewall. (If there's two harnesses running parallel to each other they will be in the harness that is higher up)

Constant: Red (+)
Ignition: Pink (+)
Starter: Yellow (+)
Heat/AC: Orange (+)
Horn: Black (-)
Parking Lights: Brown (+)
-----------------------------------------
Ignition Switch. Remove radio to access

Ignition 2: Dark Green
Passlock 2: Yellow and Black Wires
-----------------------------------------
Driver Kick: Harness Coming In From Driver Door Boot

Trunk Release: Black/White (-)
Lock/Unlock: White (-) (Negative pulse to lock, unlock needs a 1,500 ohm resistor)
Dome Sup: Green/Black (-)
Door Trigger 1: Green/Black (-)

-----------------------------------------
Pass Kick: Harness Coming In From Driver Door Boot

Door Trigger 2: Light Blue (-)


thats the wiring diagram for you

to remove the unit Disconnect cables from the rear & pull off front plate. (should pop off). Flat head driver needed.

Oct 27, 2009 | 2003 Oldsmobile Alero

2 Answers

How to remove ignition switch barrel from 1999 alero


How to remove the lock/cylinder from the ign. switch 1999 alero

Aug 31, 2008 | 2001 Oldsmobile Alero

Not finding what you are looking for?
1999 Oldsmobile Alero Logo

129 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8575 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...