Question about 1994 Mazda 2WD B Series Pickup

1 Answer

Had a timing belt put on recently on a 1994 mazda b2300 and now the water pump is pouring out water would it be from anything when he did the timing belt ?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 593 Answers

Not directly related just time for the pump to go. It has to do with the engine running so long with the old belt tension then a little extra tension when one readjust the belts on the pump and the seal wears. NOW if he did not put the gaskets back new or if he did not clean off the old gaskets before he installed new. That would be his fault. Loose bolts or broken bolts thats his fault. Look for a lot of gasket glue. Too much glue can cause a coolant leak. Look close for these signs. If the pump is leaking from the weep hole, it just is worn out.

Posted on Aug 04, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

TIMING BELT MARKS FOR 1994 MAZDA B2300


Hope this helps, it's all I could find.

ef4b474.jpg

Sep 19, 2010 | Mazda B2300 Cars & Trucks

1 Answer

I have a 1996 mazda B2300 SE The timing belt broke I have compression on all cylinders.All the timing marks are in line .When I start the truck it idles rough and has no power.There's no check engine light...


You have still got the timing marks off.Take it back down to the belt,and align it back up,it will be a notch or two off,this will cause this every time.

Nov 26, 2009 | 2007 Mazda B2300

1 Answer

Timing belt replacement


Sorry for the severe delay.
I am personally going back to answer your unanswered question.
I do not know if you still need the answer, but I am going to answer it in case you still do.

Click on the following direct LinkS. It has the Timing Belt Diagrams with Marks for the Camshaft and Crankshaft that you will need

Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com

http://www.2carpros.com/car_repair_information/year/1994/make/mazda/model/b2300/1994_mazda_b2300_timing_belt_diagram_marks.htm

Nov 08, 2009 | 1994 Mazda 2WD B Series Pickup

1 Answer

How do you line up the timeing,when changing the timeing belt. 96 mazda b2300


Click on the following free direct Link. It has the Timing: Belt and Mark Diagrams for your 1996 Mazda B2300 Pickup. Plus additional Instructional and Directional Diagrams.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1996/make/mazda/model/b2300/1996_mazda_b2300_timing_belt_diagram_marks.htm

Sep 03, 2009 | 1996 Mazda Pickup

1 Answer

1994 4 door mazda 626 need to locate where the water pump is on this car


The water pump is located at the front of the engine ( where the timing belt is) To replace it you will need to remove the timing belt covers and the belt. If you have not tackled this sort of problem before i would recommend you purchase a workshop manual ( Haynes or similar) and that will show you the correct way to do it. Best of luck.

May 29, 2009 | 1994 Mazda 626

1 Answer

Truck making noise after replacing water pump, think i may have put belt back on wrong


I have a very loud squealing noise in my 2003 mazda mvp engine when i accelerate. We removed the belts which would eliminate belts as the problem. And that's that it. If anyone has any info please let me know.
Thank you

May 11, 2009 | Mazda B3000 Cars & Trucks

2 Answers

Mazda astina water pump


It most likely runs off the timing belt. check there behind the timing belt cover.

Nov 25, 2008 | 1994 Mazda 323

1 Answer

Leaking water pump


leaking water pump was standard for that year.
Changing it without changing of taking of the cam belt shouldnt be a problem. but wen u get the new water pump make sure it the same cause in changes from serise 1 to serise 2

Oct 17, 2008 | 1994 Mazda 626

1 Answer

I have a 95 mazda b2300 timing belt broke I tried to install new belt went by the book on lining up the marks and it still wont start


Is you harmonic balencer back on? If it has timing sencer, it won't fire if it does'nt know when to fire.

Jul 16, 2008 | 2007 Mazda B2300

Not finding what you are looking for?
Cars & Trucks Logo

143 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...