Question about 2004 Chevrolet Impala

1 Answer

My car isn't starting & the starter & battery has been checked what could be the problem. Also before I got the battery checked the it ran dead from trying to get the car started from the security light being on for a whole day.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 462 Answers

Have the car checked for security codes. The system is designed to inhibit the fuel pump from turning on. Once the code is read then proper diagnosis can be done.

Posted on Aug 04, 2010

  • collins1780 Aug 04, 2010

    Is there a way I can check the security codes

  • BB1BUD Aug 06, 2010

    If you know someone with a Tech2 scanner or a high end scan tool that is willing to help you then you can get the code/s and diagnose the problem. If not you will have to go to a dealer.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

I have 1999 GMC suburban, it will not start without and boosted


Have you never had a problem like
that, since you started driving?

Start testing things-- to find a problem

Is the battery dead,old,worn out?
Have it tested

Test the starter & solenoid

Examine & test the battery cables

& many other items effecting the starting system

Won't Crank (turn over)?
or
Won't Start?

Won't Start check for fuel pressure,spark,injector
pulse & so on

Oct 04, 2014 | 2003 Chevrolet Suburban 1500

1 Answer

My 1985 vette starts up cold good and no smoke but after warm up it don't want to crank when it does it has black gray smoke for a min what's wrong


not starting when it gets warm could be a starter problem, the amp draw is probably to high for the battery to supply enough power to start. starter draw should be around 150-200 amps. the black gray smoke is too much fuel that isn`t being burnt. if the starter draw is too high then there isn`t enough voltage for the ignition system to fire the plugs properly causing the smoke.

Aug 25, 2014 | 1985 Chevrolet Corvette

1 Answer

Starter wont engage after replacing dead battery


Check power to starter motor solenoid, solenoid operation and starter motor voltage during cranking. If the starter motor is receiving power from the solenoid, but isn't cranking, then replace the starter motor.

Also check the condition of battery terminals, wiring and connections. Also check the earth wire from the body to the engine.

Nov 12, 2012 | Cars & Trucks

1 Answer

2005 sedona won't start all of a sudden. Doesn't make a sound except for a tiny whirring sound like the feul injectors. Replaced starter...still won't start. checked all fuses...they are good....


you could just have dead cell in the battery which isn't getting enough amps to the starter,, have the battery LOAD checked,, that will tell you if the battery is actually good, just because it registers 12 volts isn't necessarily an indication that the required amps are present.

Sep 27, 2011 | 2005 Kia Sedona

1 Answer

The starter doesn't start right away, the battery is good but no clicking sound is made, then after 10 - 15 minutes, it will start. what is wrong with the starter?


it may not be the starter motor it could be that the power isn't getting to the solenoid from the ignition switch, check all the wires & connections on the ignition switch to see if any are loose.........hope this helps.......cheers.

Sep 03, 2011 | Toyota Previa Cars & Trucks

1 Answer

Hello. My 1997 Chevy Tahoe refuses to start. The problems began with a bad fuel pump. I changed. It worked. The fuel pump died again. I changed it again and it has been working. I parked it for two weeks....


Now you have a good battery & a starter that turns over the motor

Have you cycled the key on & off with a fuel pressure gauge on the
fuel rail?

Do you have a fuel filter that isn't over 3 or 4 years old?

Have you checked for spark while cranking ? Use an old plug on the wires,
if you have ignition wires,don't ground the wire without resistance

If you removed the ducting & MAF Sensor it won't start

Tell us what you checked & exactly how that was done.

Jun 09, 2011 | 1997 Chevrolet Tahoe

1 Answer

Just replaced starter in 1990 chevy k 2500 but it just whines.


Hi, the starter-drive (Bendix) isn't spinning all the way into the flywheel (standard transmission) or (flex-plate) automatic transmission.

First, charge the battery using an automatic self leveling battery charger @ 2 amps till the green light comes on. Battery voltage should be taken with a volt meter while someone tries to start the car. If the volt meter drops back to zero the battery is shot.

If you still hear the zing sound buy a re-manufactured starter unless someone is clever enough to easily pull the end of the starter apart, remove the snap ring and starter drive.

Keep in mind, box store electrical parts are junk! NAPA, Carquest and AC-Delco dealers sell starters with lifetime warranties

May 24, 2011 | Chevrolet 2500 Cars & Trucks

1 Answer

For the past 2 weeks, when I try to start my 2003 Nissan Xterra, it seems sluggish, but the engine will turn over. On 2 separate occasions, when attempting to start the engine, it wouldn't turn over ...


Checked Cables how?

Looking & Touching isn't doing anything

You have to do a voltage drop test or remove
& clean the ends. I would do both

Remove the starter & have it tested at parts store,
assuming you don't know how to do a voltage or
current test while cranking.

May 24, 2011 | 2003 Nissan Xterra

Not finding what you are looking for?
2004 Chevrolet Impala Logo

Related Topics:

179 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...