Question about 2003 Chevrolet Silverado 2500HD

1 Answer

Have 2005 chevrolet 2500 hd and i have changed throttle sensors and gas pedal and even put new computer in it but the reduced engine power sign and light comes on it will run good for a week to a month then it will come on i have invested in everything when i have it scanned p 2135 code reads which is gas pedle but i already changed it so what could cause it now please help

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 462 Answers

Your problem can possibly be in the wiring in the circuits near the throttle body. The terminals can have weak crimps and broken wires at or within 4 inches of the connector to the throttle body and possibly the pcm. I have had to make wire harnesses for Aveo's with the same code problem.

Clear the code then gently wiggle the harness near the connectors to the pcm and the throttle body. Check the terminal tension to the wires at the throttle body in particular.

Good Luck

Posted on Aug 04, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Check engine light reduce engine power and traction controll off.


It could be the APP sensors or the throttle body throttle position sensors . What DTC'S - diagnostic trouble codes . Need to test the electrical wiring , 5 volt reference voltage. Drive by Wire Function and diagnostics by Wells
REDUCED ENGINE POWER - mass airflow sensor has nothing to do with this problem .
Throttle Actuator Control (TAC)
Reduced Engine Power Mode When the PCM detects a condition with the TAC system, the PCM may enter a reduced engine power mode. Reduced engine power may cause one or more of the following conditions:
?€¢
Acceleration limiting--The control module will continue to use the accelerator pedal for throttle control; however, the vehicle acceleration is limited.


?€¢
Limited throttle mode--The control module will continue to use the accelerator pedal for throttle control; however, the maximum throttle opening is limited.


?€¢
Throttle default mode--The control module will turn off the throttle actuator motor and the throttle will return to the spring loaded default position.


?€¢
Forced idle mode--The control module will perform the following actions:


-
Limit engine speed to idle by positioning throttle position, or by controlling fuel and spark if throttle is turned off.


-
Ignore accelerator pedal input.


?€¢
Engine shutdown mode--The control module will disable fuel and de-energize the throttle actuator.




Refer to
?€¢
Powertrain Control Module Description for the 4.8L, 5.3L and 6.0L engine


May 09, 2016 | 2006 Chevrolet Avalanche

1 Answer

Loss of power on dash and operates only at idle no matter how far i press on the gas pedal


Throttle Actuator Control (TAC) System Description
You have APP- accelerator pedal position sensors or one of the Throttle position sensors is going bad ! In the (TAC) system ! This is drive by wire or electronic throttle control . If you take it to the dealer or a ASE certified repair shop they can check the DTC'S - diagnostic trouble codes ! This is nothing for a DIYer to mess with ! This system can set 7 different DTC'S

Reduced Engine Power Mode When the PCM detects a condition with the TAC system, the PCM may enter a reduced engine power mode. Reduced engine power may cause one or more of the following conditions:
?€¢
Acceleration limiting--The control module will continue to use the accelerator pedal for throttle control; however, the vehicle acceleration is limited.

?€¢
Limited throttle mode--The control module will continue to use the accelerator pedal for throttle control; however, the maximum throttle opening is limited.

?€¢
Throttle default mode--The control module will turn off the throttle actuator motor and the throttle will return to the spring loaded default position.

?€¢
Forced idle mode--The control module will perform the following actions:

-
Limit engine speed to idle by positioning throttle position, or by controlling fuel and spark if throttle is turned off.

-
Ignore accelerator pedal input.

?€¢
Engine shutdown mode--The control module will disable fuel and de-energize the throttle actuator.


Drive by Wire Function and Diagnostics by Wells

May 14, 2015 | 2004 Chevrolet Silverado 2500 Crew Cab

1 Answer

2003 Chevy Trailblazer engine power lose light come on


Hi Steve , your vehicle has electronic throttle control . I don't know if you are aware of this. The gas pedal have position sensors an a wiring connector with 4-6 wires .these wires are connected to the engine computer . an there is a electric motor on the throttle body assembly , the computer opens an closes the throttle . You probably have codes stored in the engine computer .
Reduced Engine Power Mode When the PCM detects a condition with the TAC system the PCM may enter a reduced engine power mode. Reduced engine power may cause one or more of the following conditions:
?€¢
Acceleration limiting--The control module will continue to use the accelerator pedal for throttle control; however, the vehicle acceleration is limited.

?€¢
Limited throttle mode--The control module will continue to use the accelerator pedal for throttle control; however, the maximum throttle opening is limited.

?€¢
Throttle default mode--The control module will turn off the throttle actuator motor and the throttle will return to the spring loaded default position.

?€¢
Forced idle mode--The control module will perform the following actions:

-
Limit engine speed to idle by positioning throttle position, or by controlling fuel and spark if throttle is turned off.

-
Ignore accelerator pedal input.

?€¢
Engine shutdown mode--The control module will disable fuel and de-energize the throttle actuator.

Drive by Wire Function and diagnostics by Wells

May 04, 2015 | 2003 Chevrolet Chevrolet TrailBlazer

1 Answer

Where is the throtle actuator control for 2003 gmc sierra 2500 hd?


If this is "fly by wire" throttle, any misalignment between gas pedal and TPS will cause this issue. Failure of the gas pedal sender is so common Lokar company makes a replacement pedal unit that is much better than stock.

Apr 24, 2015 | 2003 GMC Sierra 2500HD

1 Answer

I have a Chevrolet Silverado 2007 new body style saying that i have reduce engine power code p2138


The automotive trouble code P2138 throttle/pedal position sensor/switch D/E voltage correlation refers to a problem related to the throttle's ability to open and close properly. Replace (suggest) the sensor (black object) on the throttle body.

Oct 08, 2014 | Chevrolet Silverado 1500 Cars & Trucks

4 Answers

Why does reduce engine power light comes on chevy


That is a hard problem to pin point without knowing what codes the computer has stored. It can be any number or sensors or engine problems.

You can go to most auto parts stores and they will pull the codes for you for free.

Jul 27, 2009 | 2005 Chevrolet Cobalt

2 Answers

Check Engine Light & Dashboard Reads Reduced Engine Power


The reduced engine power happens because there is a problem with the electronic throttle control . Some people call it drive by wire ! The gas pedal has sensors inside , position sensors , connected electrical to the PCM - engine computer , the throttle body on the engine has a DC electric motor an also has position sensors . These are also connected to the PCM electrical . The PCM reads the position sensors which indicate how much your pressing on the gas pedal . then hopefully it opens the throttle the same amout .

The throttle actuator control (TAC) system delivers improved throttle response and greater reliability and eliminates the need for mechanical cable. The TAC system performs the following functions:
• Accelerator pedal position sensing
• Throttle positioning to meet driver and engine demands
• Throttle position sensing
• Internal diagnostics
• Cruise control functions
• Manage TAC electrical power consumption
The TAC system includes the following components:
• The accelerator pedal position (APP) sensors
• The throttle body assembly
• The engine control module (ECM)

Reduced Engine Power Mode
When the ECM detects a condition with the TAC system, the ECM may enter a reduced engine power mode. Reduced engine power may cause one or more of the following conditions:
• Acceleration limiting--The ECM will continue to use the accelerator pedal for throttle control, however, the vehicle acceleration is limited.
• Limited throttle mode--The ECM will continue to use the accelerator pedal for throttle control, however, the maximum throttle opening is limited.
• Throttle default mode--The ECM will turn OFF the throttle actuator motor and the throttle will return to the spring loaded default position.
• Forced idle mode--The ECM will perform the following actions:
- Limit engine speed to idle by positioning the throttle position, or by controlling the fuel and spark if the throttle is turned OFF
- Ignore the accelerator pedal input
• Engine shutdown mode--The ECM will disable fuel and de-energize the throttle actuator.

GM Electronic Throttle Body Circuit Descriptions And Testing Tips

Tons of videos on youtube for these systems , there can be a variety problems , from wiring , worn out sensors , the DC motor , computer etc....

Jun 20, 2017 | 2007 Chevrolet Uplander

Not finding what you are looking for?
Cars & Trucks Logo

447 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...