Question about 2002 Hyundai XG350

1 Answer

SRS Service light is staying on. What do I need to look for?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 130 Answers

THIS MEANS SECURITY RESTRINING SYSTEM, BE CAREFULL MESSING WITH THE WRONG PART AN AIR BAG MIGHT BLOW UP ON YOU.
THAT USUALLY MEANS SOMETHING IS WRONG WITH YOUR FRONT/ REAR IMPACT SENSORS, AIRBAGS, SEAT BELTS ETC......... HOOP UP A SCANNER TO FIND OUT MORE.....

Posted on Aug 04, 2010

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 275 Answers

SOURCE: srs warning light

Check under the drivers and passengers front seat for electrical cables. sometimes the connections can get disturbed by feet or items that have rolled under the seats (specially if you have kids)making a bad connection of the cables
As for the rear door window mechanism, you must remove the door trim pad and you will see the mechanism with its electrical motor etc, just undo the bolts and remove it.
Hope this helps

Posted on Feb 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Srs light stays on


There is a malfunction in your Supplemental Resraint System (SRS). You need to scan your SRS control module to retrieve fault codes and find out why the light is staying on.

Jan 08, 2012 | Cars & Trucks

1 Answer

2006 toyota tacoma srs light stays on where is relay


Hi Keith,

"SRS" stands for "Supplemental Restraint System". This includes your airbags and your seatbelt pre-tensioners. The only way to find out why the light is on is to scan your airbag module and retrieve the fault codes that will be stored to let you know which part of the system is failing.

There are a few Technical Service Bulletins (TSBs) for the SRS in your vehicle, however none of them address any concerns with sysem failure or the light illuminating. They have to do with proper service proceedures to prevent accidental airbag deployment, disposal of deployed airbag parts, notification to the service technicians that they MUST replace an entire harness to fix wiring problems in the SRS and that wiring repairs are NOT to be made, etc..

Please also note that if the SRS light is on, the safety systems in your vehicle WILL NOT WORK in the event of an accident. It is highly recommended that you get this properly diagnosed and repaired by a trained service technician as soon as possible. Unless you have had specific training for the supplemental restraint system in your vehicle, I DO NOT recommend trying this at home.

Nov 06, 2011 | 2006 Toyota Tacoma

1 Answer

I have a 2001 Nissan Maxima. The air bag lite is staying on. Is this important? How do I turn the ligt off?


If the light comes on while you're driving the vehicle, there's a malfunction in the SRS System (Air Bags System). Have it inspected and repaired as soon as possible. DO NOT attempt to troubleshoot or service the SRS System yourself, even a small mistake could cause the SRS System to malfunction when you need it.

Aug 10, 2010 | Nissan Maxima Cars & Trucks

2 Answers

Srs light stays on on my Honda civic


The most likely possibility is the connector for the airbag is not on securely. Check the connector first. But if the connector is connected properly then you will have to get the error codes to locate the exact problem for SRS light ON.
There is a way to pull the codes from the SRS control unit without a scan tool.
1. Turn the ignition switch OFF , and wait for ten seconds. Then connect the SCS service connector to the service check connector (2P). If you do not wait ten seconds, the SRS unit will not be completely reset and will not output DTCs.
2. Turn the ignition switch ON (II). The SRS indicator light comes on for about six seconds and goes off. Then it will indicate the DTC:
· The DTC consists of a main code and a sub-code.
· Including the most recent problem, up to three different malfunctions can be indicated.
· In case of a continuous failure, the DTC will be indicated repeatedly.
· In case of an intermittent failure, the SRS indicator light will indicate the DTC one time, and then it will stay on.
· If both a continuous and an intermittent failure occur, both DTCs will be indicated as continuous failures.
· In case the system is normal (no DTC), the SRS indicator light will stay on.
3. Read the DTC.
4. Turn the ignition switch OFF, and wait for ten seconds. Then disconnect the SCS service connector from the service check connector (2P).
The SCS Service Tool is nothing more than a jumper wire.
Thanks. you can rate this solution and show your appreciation.

May 19, 2010 | 2000 Honda Civic

3 Answers

What is the SRS light? I have 1996 honda accord


the SRS stands for Supplemental Restraint System. Most people call it the air bags but the SRS system includes all of the sensors and control units for air bags, seat belt pre-tensioners and passenger detection systems on cars that are equiped with them

each time you start the car up the SRS control unit will do a self-test of the system to make sure all of the sensors are working properly. The SRS light will stay on while that test is conducted. If all is well and everything passes the on-board test the light will go out in about 7 seconds. If something is wrong the light will stay on.

whenever a failure is detected for any reason,the SRS light is turned on and the system is shut off. The air bags will not be deployed when the SRS light is on.

They call it a Supplemental Restraint System because your seat belts are your primary restraint system.

hope that answers your question

Nov 05, 2009 | 1996 Honda Accord

1 Answer

'02 S60, A warning stays on


you need to take it to volvo dealer to reset the light srs detects low battery voltage and turns on the light

Aug 17, 2009 | 2002 Volvo S60

2 Answers

SRS light stays on


The Supplemental Restraint System (SRS) is definitely something you want working. Those airbags can be a lifesaver in an accident. Take it back to the Dealer and tell them it wasn't broke before they worked on you car, it's broke now after they worked on it, and stress how much of a Liability this might be. Okay, okay... just ask them to fix it because you would like to have it in case you are involved in an accident. My Civic's Service Repair Manual (from Honda), says Take it To Your Dealer (see below)
===========================================
All SRS electrical wiring harnesses are covered with yellow insulation. Related components are located in the steering column, front console, dashboard, dashboard lower panel, and in the dashboard above the glove box.
Do not use electrical equipment on these circuits.

-WARNING
To avoid rendering the SRS inoperative, which could lead to personal iniury or death in the event ol severe frontal collision, all SRS service work must be pertormed by an authorized Honda dealer

Jul 18, 2009 | 2002 Honda S2000

2 Answers

SRS light blinking then staying on?


A flashing/steady-on SRS light indicates a problem with the SR system. Because the system contains an explosive, it is best serviced by a Saab trained and certified tech; you can be seriously hurt working on it yourself. SRS system problems can be diagnosed and fixed, and the light reset, by the dealer or trained workshop tech.

Pulling the bulb from the warning lights on the panel treats the symptom, without curing the cause - you've still got whatever fault triggered it in the first place! Definitely not recommended for a safety feature. (You wouldn't just pull the bulb if your ABS light stayed on, would you? Wouldn't you want to know why?)

The best source of info on this car is the "Bentley Bible" aka the Saab 900 Official Service Manual, costs about $40 from Amazon!

16 valve manual: http://www.amazon.com/Saab-900-Valve-Service-Manual/dp/0837603137

8 valve manual :http://www.amazon.com/Eight-Official-Service-Manual-1981-1988/dp/0837603102

Get the appropriate manual for your car and enjoy the Saab!

Hope this info helps; if it does, please give a "thumbs up"

Thanks

Saabreur

May 06, 2009 | 1991 Saab 900

2 Answers

Srs light fault


hi, there is a connection under the passenger seat, check terminals are in correctly, it worked for me

Jan 10, 2009 | 2003 Land Rover Freelander

Not finding what you are looking for?
2002 Hyundai XG350 Logo

109 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...