Question about 2000 Ford Expedition

1 Answer

Replacing a heater core in a ford expadition - 2000 Ford Expedition

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 667 Answers

Replacing this heater core is not fun, the entire dash must be removed and the a/c drained, this is so you can access the environmental station and remove it from the truck, then you can change the heater core, if you are not comfortable with this level of work I suggest a good local repair shop. I also recommend factory replacement heater core, the aftermarket heater core connection pipes are sealed with an o-ring and compression, the factory original is solidered completely, if you are going that far you may as well put in something that is solid, not pressed. Hope this helps, let me know.

Posted on Aug 04, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I change my heater core in my 1996 ford ranger


The heater core is located in the heater box, under the passenger side of the dash. Most FORD heater boxes are snap-clipped together, and if you remove the rear panel from the heater box, you will see the heater core...it looks like a smaller radiator...twist the heater hose off of the heater core (x2) from the engine side and gently remove the heater core from under the dash. When replacing the new heater core, be very careful re-installing new hoses to the core...it is a fragile thin metal that can leak almost instantly if tweaked too roughly...replace all parts in reverse order of removal.

Feb 01, 2015 | Ford Ranger Cars & Trucks

1 Answer

Replacing a heater core return hose to the engine in a 2007 4.6L ford f150


The whole heater core has to be replaced.An easy check is to bypass the heater core by connecting the in/out hoses to the heater core

Oct 21, 2012 | Ford F150 Cars & Trucks

1 Answer

How to inestol heater core for 1997 ford windstar 3.0


If it is necessary to remove the heater assembly, the cooling system must be drained before removing the heater core.
When a heater core leaks, a new heater core is installed or the old one repaired.
Heater Housing
  • The heater housing is usually under the dash and must be removed to gain access to the heater core.
  • Procedures for replacing the heater core vary with the year, make, and model of car. It threfore necessary to consult the manufacturer's repair manuals for the proper procedure for replacement.
f74-01.gif The heater housing is disassembled to get to the heater core. Heater Core
  • Remove the access panels(s) or the split heater/air conditioning case to gain acess to the heater core.
  • Remove the heater coolant hoses.
  • Remove the cable and/or vacuum control lines (if equipped).
  • Remove the heater core securing brackets and/or clamps.
  • Lift the core from the case. Do not use force. Take care not to damage the fins of the heater core when removing.
  • To reinstall the heater core, reverse the removal steps.
When the heater core leaks and must be repaired or replaced, it is a very difficult and time-consuming job primarily because of the core's location deep within the firewall of the car. For this reason always leak test a replacement heater core before installation.

Jan 07, 2011 | 1997 Ford Windstar

1 Answer

I replaced heater core on 97 ford f150 need map on how everthing goes back together


If it is necessary to remove the heater assembly, the cooling system must be drained before removing the heater core.
When a heater core leaks, a new heater core is installed or the old one repaired.
Heater Housing
  • The heater housing is usually under the dash and must be removed to gain access to the heater core.
  • Procedures for replacing the heater core vary with the year, make, and model of car. It threfore necessary to consult the manufacturer's repair manuals for the proper procedure for replacement.
f74-01.gif The heater housing is disassembled to get to the heater core. Heater Core
  • Remove the access panels(s) or the split heater/air conditioning case to gain acess to the heater core.
  • Remove the heater coolant hoses.
  • Remove the cable and/or vacuum control lines (if equipped).
  • Remove the heater core securing brackets and/or clamps.
  • Lift the core from the case. Do not use force. Take care not to damage the fins of the heater core when removing.
  • To reinstall the heater core, reverse the removal steps.
When the heater core leaks and must be repaired or replaced, it is a very difficult and time-consuming job primarily because of the core's location deep within the firewall of the car. For this reason always leak test a replacement heater core before installation.

Dec 21, 2010 | 1997 Ford F150 Regular Cab

1 Answer

Heater coil on a 1999 ford expedition how hard is it to change out?


Inspect/Replace If it is necessary to remove the heater assembly, the cooling system must be drained before removing the heater core.
When a heater core leaks, a new heater core is installed or the old one repaired.
Heater Housing
  • The heater housing is usually under the dash and must be removed to gain access to the heater core.
  • Procedures for replacing the heater core vary with the year, make, and model of car. It threfore necessary to consult the manufacturer's repair manuals for the proper procedure for replacement.
f74-01.gif The heater housing is disassembled to get to the heater core. Heater Core
  • Remove the access panels(s) or the split heater/air conditioning case to gain acess to the heater core.
  • Remove the heater coolant hoses.
  • Remove the cable and/or vacuum control lines (if equipped).
  • Remove the heater core securing brackets and/or clamps.
  • Lift the core from the case. Do not use force. Take care not to damage the fins of the heater core when removing.
  • To reinstall the heater core, reverse the removal steps.
When the heater core leaks and must be repaired or replaced, it is a very difficult and time-consuming job primarily because of the core's location deep within the firewall of the car. For this reason always leak test a replacement heater core before installation.

Dec 03, 2010 | 1999 Ford Expedition

2 Answers

Heater core 2000 ford windstar


Inspect/Replace If it is necessary to remove the heater assembly, the cooling system must be drained before removing the heater core.
When a heater core leaks, a new heater core is installed or the old one repaired.
Heater Housing
  • The heater housing is usually under the dash and must be removed to gain access to the heater core.
  • Procedures for replacing the heater core vary with the year, make, and model of car. It threfore necessary to consult the manufacturer's repair manuals for the proper procedure for replacement.
f74-01.gif The heater housing is disassembled to get to the heater core. Heater Core
  • Remove the access panels(s) or the split heater/air conditioning case to gain acess to the heater core.
  • Remove the heater coolant hoses.
  • Remove the cable and/or vacuum control lines (if equipped).
  • Remove the heater core securing brackets and/or clamps.
  • Lift the core from the case. Do not use force. Take care not to damage the fins of the heater core when removing.
  • To reinstall the heater core, reverse the removal steps.
When the heater core leaks and must be repaired or replaced, it is a very difficult and time-consuming job primarily because of the core's location deep within the firewall of the car. For this reason always leak test a replacement heater core before installation.

Dec 02, 2010 | 2000 Ford Windstar

1 Answer

2000 windstar is leaking coolant behind motor and smells with ac on...Heater core?


Yes u have a leaking heater core, below fin d the instructions to replace it.
1997-2000 Ford Windstar 3.8
Heater Core
Inspect ' Replace
Drain the cooling system

Heater Housing

The heater housing is usually under the dash and must be removed to gain access to the heater core. Procedures for replacing the heater core vary with the year, make, and model of car. It is therefore necessary to consult the manufacturer's repair manuals for the proper procedure for replacement.
The heater housing is disassembled to get to the heater core.
Heater Core Remove the access panels(s) or the split heater/air conditioning case to gain access to the heater core. Remove the heater coolant hoses. Remove the cable and/or vacuum control lines (if equipped). Remove the heater core securing brackets and/or clamps. Lift the core from the case. Do not use force. Take care not to damage the fins of the heater core when removing. To reinstall the heater core, reverse the removal steps. When the heater core leaks and must be repaired or replaced, it is a very difficult and time-consuming job primarily because of the core's location deep within the firewall of the car. For this reason always leak test a replacement heater core before installation.

Oct 25, 2010 | 2000 Ford Windstar

1 Answer

Replace heater core in 2005 ford taurus


This is a very big job, You must remove the complete dash assembly, then remove the heater box assembly , then replace the heater core and reassmble everything that was removed to gain access to the heater core.

Apr 18, 2010 | 2004 Ford Taurus

1 Answer

Heater core 2001 ford tauras


These are on of the hardest heater cores in the industry to replace. A typical garage will get between $800.00 and $1200.00 to replace, the dealer will get $1600.00 because you have to completely remove the steering column the dash, discharge the A/C system reomve the heater box, split it and replace the core. The job is so labor intensive you would be crazy not to replace the A/C evaporator at the same time. This is not a job for an amature or ever a class "B" tech. leave this one to the Pro's.

Sep 02, 2009 | 2001 Ford Taurus

Not finding what you are looking for?
2000 Ford Expedition Logo

198 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...