Question about 1996 Buick LeSabre

1 Answer

Emergency brake hazard light wont stop beeping,,,think its broken because the brakes are fine,,,it is so loud and annoying,,,do i need to reset it?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 33 Answers

It does not matter if it feel fine now.
you must without delay get it check by a specialist this is your life we are talking about

Posted on Aug 03, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why aren't hazard lights or brake lights working?


Brake lights /rear hazard lights not working - Ford Truck ...

www.ford-trucks.com > ... > 1967 - 1972 F-100 & Larger F-Series Trucks
Jul 9, 2010 - After checking the brake lights I tried the emergency flashers and found that they are working in the front but not in the back. I do have rear turn ... 1995 F350 Brake Lights / Turn Signals not working
Jul 9, 2012
Turn Signals and Brake Lights Do Not Work
Mar 10, 2012
Turn Signal, Brake Lights, & Rear Hazard not working
Aug 3, 2010
Rear Turn Signals, Hazards and Brake Lights not working....
Aug 29, 200

Sep 30, 2015 | Cars & Trucks

5 Answers

Signal And Brake lights


The flasher unit is located under the dash, near the steering column. This could also be caused by a faulty ground wire. Check the wiring for broken, bare, or loose wires or connections.

Jul 25, 2008 | 1998 Dodge Ram 3500 2WD

1 Answer

For the Honda CRV 2004, the driver's side automatic window does not go up or down but all other ones do. Please advise.


Your emergency brake is a mechanical brake system that is indipendant of the regular hydrolic system. If the red brake light on the dash is on make sure it's the emerg. brake and not a problem with the fluid level or the calapers sticking. the best way to check the emerg. brake is to rase both rear wheels off the ground and spin them. If they spin, the emerg. brake is not locked up. If they don't spin, take the rear tires off and the brake drums. (you may have rear disk brakes.) check the springs to insure they are all hooked up properly. If there is no problem there, follow the parking brake cable to check for damage. The cable is like a brake cable on a bike, If the inner cable is binding inside the cable sleeve,the brake wont release. If you have rear disc, it's probly a bad calaper.The park brake cable is attached to the calapers. Rember if it wont run it's annoying but if it won't stop, it's deadly. DON"T experiment with brakes!!! If in doubt, take it to a pro.

Oct 12, 2012 | 2004 Honda CR-V

1 Answer

Loud squeaky noise from front tires when turning and somtimes whe


Hi my name is Tom and I can help you.

Driving with your emergency brake on is only going to affect your rear brakes. There is a cable running from the emergency brake lever to your rear brakes.

You did not say how long you drove with the emergency brake on, but even a short distance and you forced the front brakes to do the work of stopping the car. This causes overuse which translates to heat. When the brakes over heat they "fade" and do not stop the car effectively.

In addition the heavy load of doing all the stopping causes the brakes not to realign. Therefore, when you go around corners the brakes pads will rub against the rotors.

I would suggest you get the brakes looked at or look at them yourself. I can help you do the job but I would need to talk to you directly. Let me know what I can do to help.

TomE

Jun 29, 2010 | 1995 Ford Escort

1 Answer

Car started beeping when driving down road


the beep beep is telling you that your parking brake is still on.
if the abs red light is on get it fixed, like, yesterday.
what price safety........

May 20, 2010 | 1997 Buick Riviera

1 Answer

I have no signals and when brakes lights are on, lose brake light to either side turn signal is set on


Hi!!

If you activate the turn signal switch and you step on the brake pedal, the turn switch (on the steering column) deactivates the brake light to make the signal light more visible. The bulb for the stop and turn lights is the same.

Turn hazard lights ON. If they don't blink, replace turn/hazard flasher, If one or more lights don't come on, replace bulb.

Check fuse and circuit wiring for broken or loose connections. If all looks fine, check following:

If front turn lights work fine, check brake/turn bulbs.

If turn lights come on but don't blink, replace turn signal/hazard flasher.

If front and back turn lights don't come on, replace switch on column.

Let me know how it worked out, Good Luck

Mar 24, 2010 | 1991 Plymouth Acclaim

2 Answers

03 Ram 1500 E-Brake light flashing


its possible the switch on the e/brake unit broke, take a flashlight and locate a single/double wire that goes to the e/brake assembly (this is the piece you depress with your left foot) and look to see if the wire is broken or the switch the wire goes to is broken.

Dec 15, 2009 | Dodge Ram 1500 Cars & Trucks

2 Answers

Emergency brake light beeps and flashes at random


it would appear one of 2 things, the plug has come off the brake switch, {under dash} or the wire has been severed and is touching the body hence the light flashing and beeping. Only an inspection can resolve this issue. Good luck

Nov 18, 2009 | 1999 Volkswagen Beetle

3 Answers

Brake Lights don't work


I have a 1987 Cutlass Supreme and the brake lights wouldn't work. When I moved the tilt steering to a certain position they worked.

May 25, 2009 | 1987 Oldsmobile Cutlass Supreme

1 Answer

2004 honda crv brake won't release


Your emergency brake is a mechanical brake system that is indipendant of the regular hydrolic system. If the red brake light on the dash is on make sure it's the emerg. brake and not a problem with the fluid level or the calapers sticking. the best way to check the emerg. brake is to rase both rear wheels off the ground and spin them. If they spin, the emerg. brake is not locked up. If they don't spin, take the rear tires off and the brake drums. (you may have rear disk brakes.) check the springs to insure they are all hooked up properly. If there is no problem there, follow the parking brake cable to check for damage. The cable is like a brake cable on a bike, If the inner cable is binding inside the cable sleeve,the brake wont release. If you have rear disc, it's probly a bad calaper.The park brake cable is attached to the calapers. Rember if it wont run it's annoying but if it won't stop, it's deadly. DON"T experiment with brakes!!! If in doubt, take it to a pro.

Apr 30, 2009 | 2004 Honda CR-V

Not finding what you are looking for?
1996 Buick LeSabre Logo

Related Topics:

175 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...