Question about Mercedes-Benz ML-Class

1 Answer

2002 ml55 amg the light bas and ets is on what cause this light to come on

Posted by on

  • Rudy Cordova
    Rudy Cordova Aug 04, 2010

    THIS IS VERY HELPFULL. IF EVERYBODY THAT IS PROFESSIONAL LIKE THIS GUY SHOWED PICTURE HOW TO DO A TASK, WE WILL ALL SAVE AND SAVE A LOT OF MONEY. THANK YOU VERY MUCH.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,272 Answers

The bas light and ets light.Try this procedure.
1. Start the car.
2. Step hard on the foot brake and hold it.
3. Step hard on the parking brake and hold it.
4. Release foot brake slowly.
5. Step hard on foot brake and release it slowly.
6. Step hard on foot brake and release it fast.
7. Step hard on foot brake and release it fast.
8. Release parking brake.
9. Turn off ignition.
10. Restart car and drive.

If the 3 malfunctions reoccur, repeat the above 10 steps two more times.
If this is not helping then this problem is due to faulty brake light switch.get it replaced. The parts costs 12 bucks at the dealer, only takes about 7 minutes to change. Also check the steering angle sensor if the problem repeats. Click this link directly for more help:-- http://www.keysolutions.com/M-class.nsf/aac7d56ca8fd884b852563be00610639/fb48fc08332238e585256e830060747e?OpenDocument&AutoFramed ---------- Thanks. Keep updated for any more query. You can rate this solution and show your appreciation.

Posted on Aug 03, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Abs, bas and ets lights are on


Hi Serg, had same problem, try cleaning EGR valve with proper cleaner (spray} now all good. Hope helps. P.

Jan 26, 2014 | 2000 Mercedes-Benz S-Class

1 Answer

2001 Mercedes ML55 AMG


Your switch has either died, blew a fuse, or the window motor is stuck., Check the easiest one first. Pull the switch out and inspect if for broken wires or damage. Next check the fuses. if all good, pull the door panel off and try tapping of the window motor with a small hammer or metal bar. This will jar it loose from the "dead spot" much like a starter motor

Nov 11, 2013 | 2003 Chevrolet Equinox

1 Answer

BAS light on. Starts but will not go into drive from park


the bas warning light is on along with the ets warning light, how to I repair the problem? The code reader indicates that it a sppeed sensor.

Aug 27, 2010 | 2007 Mercedes-Benz ML320 CDI

1 Answer

I have two orange warning lights on the dash- BAS ESP and ETS. Things are running fine? 2001 320ML


My Benz did the same and the cruise control would cut after a short period of time. If this is also happening to you,you need a Brake safety switch replaced.This is located behind you brake pedal.Go by a local Mercedes mechanic they should have one it's a common problem. You can put it on your self if you can screw in a light bulb! The warning lights will reset after a few engine starts.

Sep 25, 2009 | 2002 Mercedes-Benz M-Class

1 Answer

ML270, multiple warning lights


Yes it could be that simple and probably is.

Jul 03, 2009 | 2002 Mercedes-Benz M-Class

1 Answer

ETS light stay on all the time.


ABS--BAS--ESP
The Electronic Traction System uses you ABS tu assist in stability

Most likely cause is the 'stop lamp switch'
It is a electric switch located on the brake pedal inside the car, about half way up on the brake pedal.
Pretty cheap too, I think the switch is only like $25 bucks.
2 connectors on the switch and then it turns out.
hope that helps

Jun 26, 2009 | 1996 Mercedes-Benz C-Class

1 Answer

Warning Light on Mercedes ML270


Hi,

To my understanding:
BAS ESP - Electronic Stability Program (keeps you moving in the direction you intended the vehicle to go); probably a faulty brake switch or a bad brake sensor. You may want to reference this forum for additional insights;
ETS - Electronic Traction System (keeps you moving); would require an appropriate code reader to diagnose and pinpoint problem.Surprisingly, there has been some reports of defective brake pedal switch that activates this warning. You may lilkewise want to reference this forum for additional insights.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

Jun 06, 2008 | 2002 Mercedes-Benz M-Class

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

228 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...