Question about 2002 Nissan Altima

1 Answer

The car just get repair but know it wont star the injector dont open to spray the gas

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 158 Answers

Hi,

Check that the computer is hooked up and getting power.
This vehicle has what is called throttle body injection. The injectors are controlled by the ignition module and the ECM (main computer). Check the ECM fuse in the fuse box first.
Check fuel pressure with a GAUGE. The fuel pressure should be 9-13 lbs.If you are getting the right pressure in your main line there is a pressure regulator diaphram in the TBI that could be bad.

Check you ground wires from the body to the engine if that checks out then you may have a broke wire or bad injector drive in the ECM

Make sure you have fresh fully charged battery installed.
These are the easiest and least expensive things to do. If this doesn't fix it you may have a bad Ignition module and or a bad ECM.

Have a nice day.

Posted on Aug 03, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1999 mercury misquet wont start?


DID YOU CHECK THE SIGNAL TO THE INJECTORS? WHEN YOU SPRAY CARB.CLEANER AT THE T.B. THE CAR STARS?
IF YOU HAVE GOOD INJECTOR SIGNAL, PROBLABLY YOU HAVE DEFECTIVE INJECTORS. REMOVE LITTLE BIT UP INJECTORS RAIL AND LEAVE IT EVERYTHING CONNECTED TRY TO STARTER IT AND CHECK IF THE INJECTORS SPRAY IT.-------- IF YOU DO NO HAVE INJECTOR SIGNAL CHECK THE CONNECTOR WIRES -SWITCH ON COMPUTER SIGNAL AT ONE SIDE,,,,,AND GROUND AT THE OTHER SIDE

Oct 05, 2017 | Mercury Cars & Trucks

1 Answer

No fuel comeing out of injectorson carb


may i know the year and type of the vehicle

Oct 26, 2014 | Cars & Trucks

1 Answer

I have a 1991 chevy s-10 blazer 4.3 engine. The fuel injectors are not spraying out any gas at all. I have already replaced the TP Sensor, Fuel Filter Regulator, and the Fuel Injectors still Im not getting...


need to see if the fuel pump is working and has electricity going to it if its and fuel is reaching to the injectors but they still do not spray gas then you need to change the ECM unit thats the computer.

Aug 31, 2011 | 1991 Chevrolet S-10

1 Answer

1991 Mitsubishi Mighty Max 2D 4X4 V6 3.0L No Start.


you can get pressure specs from your local parts dept, and check injector signal with a noid light

Apr 23, 2010 | 1991 Mitsubishi Mighty Max

1 Answer

No Fuel??? Not starting.


You have fuel flow but the question now is are the injectors pulsing. Given the year of the truck my gut says your ECU, Engine Control Unit, has failed. Mitsubishi had issues with the capacitors in their early 90's cars, trucks SUVs. I have been thru this with two monteros and one 3000GT, very common. To check your injectors rent a set of NOID lites from Autozone our such. Remove an injector plug and itstall a noid light. Turn the engine over, if no flash, no pulse. Remove the ECU and carefully open it up. Look for the capacitors, there should be 3, look under the capacitors on the board; if there is a grease like substance, often time it has a green hew to it, then the capacitor(s) have failed. It may be possible to replace the capacitors or simply purchase a rebuilt ECU. Be ceratin the MD number matches on the new unit.
Please let me know your results and if this had assisted you.
Thanks, Tom

Apr 23, 2010 | 1991 Mitsubishi Mighty Max

1 Answer

My 94 s-10 4.3 wont spray fuel?


you can purchase what is called a noid light not to expensive they plug into the injectors conection the noise your hearing is called a two second run . if the light don't come on the ignition modual needs replaced that is mounted under the distributor cap .

Aug 26, 2009 | 1994 Chevrolet S-10

1 Answer

Car wont star after a drive


YOU HAVE DIRTY FUEL INJECTORS.THEY ARE STICKING OPEN. FLOODING THE ENGINE. WHEN YOU TURN IT OFF.FILL GAS TANK UP.PUT A BOTTLE OF PRESTONE FUEL INJECTOR CLEANER IN GAS TANK.

Aug 01, 2009 | 1994 Buick LeSabre

1 Answer

My car suddenly wont start, it cranks but no ignition..


ok.... get this from autoparts store engine flush follow all direccions injector cleaner put this on the gas.now before you star working on the engine flush think about this did you see when the car was working like blue smoke.if not .. the rings o gaskets on top of the valve cover they are broke from insideso this let the oil go throw the plugs when they got wet dont ignite.. go step by step. chek all electrical conectors !!!!!!!!

Feb 26, 2009 | 2000 Mitsubishi Eclipse

Not finding what you are looking for?
2002 Nissan Altima Logo

140 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

Marvin
Marvin

Level 3 Expert

81400 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22359 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...