Question about 2007 Mitsubishi Galant SE Sedan
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2007 xl7
Brake lights were easy... open hatch you will see 2 lil circle covers with a notch out of the bottom for removal... i used a flat head to remove these then used a phillips head screw drive to remove the two screws behind the covers... pull out unit and you will see where the bulb goes... pull that out and just put the bulb in. It was sooo very easy... thanks Kim
Posted on Jan 26, 2009
You shouldnt have to pull the whole lens assembly.On the back of the lens assembly(inside engine compartment)you should find what looks like a big round nut where the wires go in.unscrew that nut and your headlight should come out and you can insert the new one.Its a halogen bulb.
Posted on Mar 04, 2009
When you open the hood, you will see little plastic tabs that you can pull up. This will release the headlight assembly, and give you access to the bulbs.
Posted on Mar 24, 2009
Tips for a great answer:
Jul 04, 2014 | 2007 Hyundai Entourage Limited Minivan
Open the Galant's hood and locate the headlight cover -- roughly 3-inch wide circular piece of plastic -- behind the headlight bulb intended for replacement. Turn this cover clockwise to unlock it and pull it from the headlight assembly, exposing the headlight socket below it.
Hold the rear of the headlight socket and turn it counterclockwise to unlock it. Pull the headlight socket and bulb from the headlight assembly.
Grab the bulb and pull it from the socket with a slight wiggling motion.
Pick up the new 9003 headlight bulb using a clean, lint-free cloth and line up its prong with the slots in the socket. Never tough the bulb with your bare hands, as the oils left by your hands can cause the bulb to burn out prematurely.
Slide the socket and new bulb into the headlight assembly and turn the socket clockwise to lock it into place.
Place the plastic cover behind the bulb and turn it counterclockwise to lock it into place.
Repeat Steps 1 through 7 for the headlight bulb on the other side of the Galant, if needed. Close the Galant's hood.
Read more: How to Put in a Headlight Bulb on a 2000 Mitsubishi Galant ' eHow.com http://www.ehow.com/how_8210819_put-bulb-2000-mitsubishi-galant.html#ixzz27iQwCdOe
Close the Galant's hood.
Sep 27, 2012 | 2000 Mitsubishi Galant
Dec 21, 2010 | 2003 Mitsubishi Galant
Dec 17, 2010 | 2005 Mitsubishi Galant
Dec 09, 2010 | 2003 Mitsubishi Galant
Apr 26, 2010 | 2007 Lincoln MKX AWD
Mar 04, 2009 | 2001 Mitsubishi Galant
Jul 08, 2008 | 2001 Mitsubishi Galant
805 people viewed this question
Usually answered in minutes!