Question about 2006 Ford F-150

1 Answer

By kingsprospec on Aug 03, 2010" " Hi my car is a ford fiesta 1.4 zeteck I went down a pot hole in december and it buckled my whheels. It worked out cheaper to buy a whole new set of alloys. I bought my new alloys and they was fitted with brand new tyres and tracking and balancing. I have had nothing but problems with them since with vibrations through the steering wheel. I have had them exchanged for a complete new set and tracking and balancing done again to be sure it's all correct. The problem is still there I really dont know what else to try to resolve the problem?? Please can you help me out?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Teacher:

    An expert who has written 2 tips or uploaded 1 video tip.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 72 Answers

It sounds like some of the steering components are bent, also check the camber.

Posted on Aug 03, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where will i find the engine number


not sure try looking on a alldata book but when i built engines in ford of dagenham in 1971 they were stamped on the top hole where the starter motor went ,the fixing bolt .

Sep 21, 2015 | 2005 Ford Fiesta Zetec

1 Answer

I have a 2005 zetec s fiesta and have a rumbling noise coming fronm front wheel when going over pot holes any clues?


Your wheel bearing is on its way out, should be around £150 to fix maybe cheaper. Don't forget to rate me.

Aug 13, 2010 | Ford Escort Cars & Trucks

2 Answers

Hi my car is a ford fiesta 1.4 zeteck I went down a pot hole in december and it buckled my whheels. It worked out cheaper to buy a whole new set of alloys. I bought my new alloys and they was fitted with...


THAT WEIRED, CHECK YOUR SHOCKS FOR LEAKS YOU MIGHT OF DAMAGED ONE, THE WAY YOU CAN KNOW THAT IF ITS BROKEN SEPERATED FROM TOP OR BOTTOM, OR IT LEAKED THE FLUID YOULL SEE IT WET. DRIPPING WET.

Aug 03, 2010 | 2006 Ford F-150

1 Answer

Alloy has been buckled due to a pot hole) now tire keeps going flat.


You need a new wheel. Your continued use of this damaged wheel is not only inconvenient (you must continue to blow up the tire) but also dangerous. Your tire was probably damaged when you hit the pot hole and could suddenly fail at any time. Your wheel is now also out of balance and can cause other mechanical troubles with your 27 year old car.

Thank you for your interest in FixYa.com

Mar 02, 2010 | 1983 Peugeot 504

1 Answer

Audible seatbelt warning keeps on sounding on my 2005 f150 ford truck


From the F-150 Forums, since I just bought one and this worked!

This is straight from my 2009 f150 owners guide

Preperation
1. the parking brake is set
2. truck in park
3. ignition switch is in off position
4. both seat belts are unbuckled

Disable Belt-Minder
1. turn the ignition switch to the on position, DO NOT START THE ENGINE.
2. wait until the safety belt warning light turns off. (approximately 1 minute).
* step 3 must be completed within 50 secs after the safety belt warning light turns off.
3. buckle then unbuckle the seat belt nine times, ending in the seat belt unbuckled.
* after step 3 the restraint warning light, (airbag light) will turn on for three (3) seconds.
4. within approximately seven (7) seconds of the light turning off, buckle then unbuckle the safety belt.
* the restraint system warning light will flash four, (4) times per second for 3 seconds for confirmation

you can do this for the passenger side also!!!


*NOTE
in step 3. after three times buckling and unbuckling the restraint warning light lit up in my truck. SO I WENT TO THE NEXT STEP, (STEP 4). waited 3 seconds and i buckled and unbuckled.

in the buckle /unbuckle procedure do it some what slowly and watch for the light. it may not take 9 times.
__________________

May 08, 2009 | 2005 Ford F-150

1 Answer

2001 hyundai santafe very wobbly wheel


If you've hit a pot hole hard then the wheel could simply be buckled. Remove the wheel and place it flat on the ground if it wobbles on the ground problem solved: buckled wheel!

Apr 28, 2009 | 2001 Hyundai Santa Fe

1 Answer

Ford fiesta hydraulic clutch not working


your clutch went bad, need to replace it.

Nov 17, 2008 | 1997 Ford Escort

Not finding what you are looking for?
2006 Ford F-150 Logo

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

81400 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22359 Answers

gerry bissi

Level 3 Expert

4376 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...