Question about 1995 Oldsmobile Aurora

1 Answer

I have a bad motor and or transmission mount that has been replaced before and when I got the car it is broken again,, the cooling fans won't come on and the ignition switch won't catch the on position, it is tweaked or something , it'll start, but the switch goes past the run position,,,to off, , can you give me some idea where and what to do with these problem,s , all the parts are sky high ,,but was hoping there is a way to cut a few corners, with repairs.. thanx...

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 642 Answers

Engine mount : Dont buy from agents. Buy from Autozone or such like.
Source another ignition from a breakers yard. Dont pay more than half the price of a new one and shop around. You can attempt a repair but lose many hours in the process
As for the cooling fans you can hardwire the fans to work permanently with the ignition on. Run a wire from the ignition switch straight to the fans.Just wire an inline fuse into the circuit to protect against fire due to shortcircuit. This is not recommended but is about the cheapest way of :"cutting corners"

Posted on Aug 03, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I fix cooling fans that run when car is off


Replace the fan relays. The Radiator Cooling Fan Motor Relay is located: Under hood, driver side, front side of strut tower, mounted in relay panel
Application:
High speed The Radiator Cooling Fan Motor Relay is located: Under hood, driver side, front side of strut tower, mounted in relay panel
Application:
Low speed,here's a new part.
http://www.autozone.com/cooling-heating-and-climate-control/relay-radiator-cooling-fan-motor/duralast-relay-radiator-cooling-fan-motor/plymouth/voyager-2wd/1996/6-cylinders-3-3-0l-mfi/412240_0_0

Sep 22, 2015 | 1996 Plymouth Voyager

1 Answer

Banging noise under hood when i decelerate


The first thing to check is the motor mounts. If they are good check the transmission mounts. The front axle on an AMC Eagle is mounted on the motor. If the motor mounts are bad (real soft or broken) parts of the front axle or motor can bang around. Same with the transmission mount -- it can let the motor and transmission shift around and bang against the floor of the car.

Jan 14, 2014 | 1988 AMC American Motors Eagle

4 Answers

Why won't the fan motor shut off on my 1991 acura legend?


Hey chandralebea,

Try first by replacing the cooling fan engine temp sensor switch, as this may be the cause.



Good Luck

Jul 29, 2012 | 1991 Acura Legend

2 Answers

95 lexus es300 over heats when ac is turn on


Is your radiator cooling fan operating when the A/C is turned on? The cooling fan should be running at all times with the A/C on. If it does not, then your problem is being caused by a bad cooling fan motor, a bad cooling fan relay, a broken fan motor circuit, or broken fan control circuit.

Aug 27, 2011 | Lexus ES 300 Cars & Trucks

1 Answer

Left fan broke now transmission light is on


most vehicles have transmission cooler mounted in behind radiator sounds like your fan is not cooling enough becuse of broken fan.

Aug 21, 2011 | 2001 Dodge Grand Caravan

2 Answers

When iput my car in gear i can fell the motor raise up with a thump noise also fan belt makes a winning sound


The Motor raising up issue is, you may have a worn or broken Engine or Transmission Mount, inspect the mounts by having someone or you, look at the mounts while someone else puts the car in gear. If you see the mounts move excessively, than the mounts need to be replaced. The whining or squealing Fan Belt may be a worn, glazed or loose belt. I would inspect the belt and tighten or replace as needed.

Jul 05, 2010 | 2001 Nissan Quest

3 Answers

The cooling fans stop working


check your sensor that controls the cooling fans.may need to be replaced.

Jan 01, 2010 | 2003 Chevrolet Impala

1 Answer

Want to replace the radiator on my 1997 ford thunderbird


Radiator Aluminum Core, Crossflow — 3.8L (Base) and 4.6L Engines
Removal
  1. Drain engine cooling system as described. Disconnect upper radiator hose (8260) and lower radiator hose (8286) and radiator overflow hose (8075) from the radiator (8005). Disconnect the transmission oil cooler inlet and outlet lines from the radiator.
  1. Remove cooling fan motor,fan blade (8600) and fan shroud (8146) assembly as described.
  1. Remove radiator upper bracket retaining bolts and remove bracket. Lift radiator from vehicle.
Installation
  1. Position the radiator into the vehicle. Install upper brackets and tighten bolts securely.
  1. Connect the transmission oil cooler lines to the transmission oil cooler fittings.
  1. Install cooling fan motor, fan blade and fan shroud assembly as described.
Engine Cooling Fan Motor, Fan Blade and Fan Shroud Assembly, Electrical Removal
  1. Disconnect (pull apart) the male-female cooling fan motor wiring connector at the side of the fan shroud (8146). Remove the male terminal connector retaining clip from the fan shroud mounting tab.
  1. Remove two fan shroud upper retaining bolts at the radiator tanks.
  1. Lift cooling fan motor/fan blade (8600)/fan shroud assembly past radiator (8005), disengaging fan shroud from two lower retaining clips.
Installation
  1. Follow removal procedure in reverse order.
  1. Tighten fan shroud retaining bolts to 5.2-7.2 Nm (46-63 lb-in).

  2. 10e2638.gif
    8d231fe.gif HOPE THIS HELPS.

    Oct 30, 2009 | 1997 Ford Thunderbird LX

    1 Answer

    How do i replace the radiaor? on this 2005 Hyundai do i remove the intake cover, then the cooling fan, the the motor mount? what?


    Below are instructions and a diagram for removing the radiator from your Santa Fe. There's nothing involving the motor mounts. Best of luck and please post back with any questions or just to rate the solution. Greg

    1. Drain the cooling system. Remove the radiator cap to speed draining.
    2. Remove the inlet hose from the radiator.
    3. Remove the transmission oil cooler lines from the retainer clip at the bottom of the cooling fan shroud.
    4. Remove the fan shroud clip from the condenser tubes.
    5. Remove the bolt that connects the fan shroud to the condenser hold down bracket.
    6. Remove the air deflectors from the top of the radiator.
    7. Remove the cooling fan shroud bolts.
    8. Remove the coolant reservoir hose from the radiator overflow neck.
    9. Remove the radiator upper support brackets and bolts that connect to the fan shroud.
    10. Disconnect the engine cooling fan motors electrical connectors.
    11. Remove the cooling fan motors electrical harness from the fan shroud clips.
    12. Remove the cooling fan shroud.
    13. Remove the outlet hose from the radiator.
    14. Disconnect the transaxle oil cooler pipes from the radiator.
    15. Tilt the top of the radiator rearward.
    16. Remove the condenser hold down bracket from the radiator.
    17. Lift the condenser from the mounting tabs on the radiator and position the condenser aside.
    18. Remove the radiator.
    6db9db4.gif

    Aug 11, 2009 | 2005 Hyundai Santa Fe

    1 Answer

    Fan won,t run on 2000 Ford Contour


    fan motor may be bad. also could be a sensor. you can jump the fan motor off of the battery to see if it works.

    Jan 06, 2009 | 2000 Ford Contour

    Not finding what you are looking for?
    1995 Oldsmobile Aurora Logo

    108 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Oldsmobile Experts

    yadayada
    yadayada

    Level 3 Expert

    76164 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8273 Answers

    Are you an Oldsmobile Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...