Question about 1998 Plymouth Neon

1 Answer

I have a MAF/IAT combo in my 98 plymoth neon 2.0 DOC i need a wire diagram for the wires goin to the sensor

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Plymouth Master
  • 6,826 Answers

SENSOR GND A BLK/LT BLU
IAT SENSOR SIG B BLK/RED
5 VOLT SUPPLY C VIO/WHT
MAP SENSOR SIG D DK GRN/RED

Posted on Aug 03, 2010

Testimonial: "thanks alot cool"

  • 6 more comments 
  • shyguy828 Aug 03, 2010

    Im kinda confused i need to know the colors for just the IAT wires the abreveations threw me off

  • Duane Wong
    Duane Wong Aug 03, 2010

    black with red line on it.

  • Duane Wong
    Duane Wong Aug 03, 2010

    I couldn't copy and paste the schematic to fixya.com's site, so I copied it as exactly as I could.

  • shyguy828 Aug 03, 2010

    ok black with red line is the ground what color is the power

  • Duane Wong
    Duane Wong Aug 03, 2010

    The 5 Volt Supply is Violet with a white line

  • Duane Wong
    Duane Wong Aug 03, 2010

    SENSOR GROUND IS BLACK WITH LIGHT BLUE LINE
    MAP SENSOR SIGNAL IS DARK GREEN WITH RED LINE

  • Duane Wong
    Duane Wong Aug 03, 2010

    ALSO, NOTE THAT I READ THAT IT WAS A MAP SENSOR (MANIFOLD ABSOLUTE PRESSURE) AND NOT MAF SENSOR (MASS AIR FLOW ).

  • shyguy828 Aug 05, 2010

    For the IAT sensor I need the signal wire

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the MAF/IAT sensor on a 2004 Chevrolet Silverado ?


You Tube Video--always go there,always

Google--always use that & read what is in print, for decades

In or on the intake plastic ducting between the air
filter box & the throttle body on ALL (98%) of vehicles
you can find the MAF,follow the wires

I would guess 90% have the IAT also inside & part of the maf

Jul 16, 2014 | 2004 Chevrolet Silverado SS

1 Answer

Iat sensor diagram maf groundthe


ok 95 , must be 16v as only that engine has MAF.
the sensor is on the air cleaner box, has 2 wires. and the ohms
is on the below page. as is the full schematic, and the maf wiring
is the cel glowing key on , and off driving 20miles? if not post the flash codes. DTCs.
the iat is the least important in fact the 92 its MISSING !
the maf tests are here. too. many tests,
suzuki sells a maf for $1000 (dogs) and the china one is junk.
so test it carefully or go broke fast.
IAT and ECT ( both read same)
http://www.fixkick.com/ECU/temp-sensors.html

see gen 2 here.
http://www.fixkick.com/schematics-run.html

der MAF.
http://www.fixkick.com/sensors/92-95MAF/92-95-MAF-testing.html


Nov 27, 2013 | 1995 Geo Tracker

1 Answer

For a 2005 GMC yukon 5.3L what are the wire colors that control the IAT sensor There should only be 2 wires controlling it but there are 5 on the connection as it controls the MAF and IAT with the sa


The intake air temp sensor is part of the MAF sensor so yes there are 5 wires.
The two wires that go to the air temp sensor are tan and black. The other three are for the MAF.

Apr 20, 2013 | GMC Yukon Cars & Trucks

1 Answer

Cant find the 2 wires that lead to MAF/IAT int plymouth neon 2000


The neon does not have a MAF sensor. The intake air temp sensor is located in the air snorkel between the throttle body and the air filter.

Apr 04, 2013 | 2000 Plymouth Neon

1 Answer

I need to know which 2 wires lead to the MAF/IAT sensor on 99 mountainere


We do not have wiring diagrams due to copyrighted material. You can however buy the factory wiring booklet here.

Sep 17, 2012 | 1999 Mercury Mountaineer

1 Answer

I need to know which wires from my air box plug are the IAT (Intake Temperature Sensor) and which are the MAF (Mass Air Flow) wires.


sorry i do not know the colours off the top of my head, but the IAT it the small 2 wire sensor about halfway up the air duct, and the MAF is the large multi wire connector close to the air filter box. good luck!

Apr 27, 2010 | 2005 Pontiac Grand Prix

2 Answers

There are 5 wires in my MAF plug. I need to disconect two of the IAT wires to add a performance chip. I just don't know which two those wires are.


get a diagram from dealer for the iat not mass air and just hook it up to iat. maf are to exspensive to mess with . tell the dealer you need to replace your iat and need a diagram they will give it to you. that's your wires

Jun 02, 2009 | Cadillac STS Cars & Trucks

1 Answer

IAT Location Buick Regal 1999


iat screws into intake mine has two wires different year though.

Jan 20, 2009 | 1991 Buick LeSabre

Not finding what you are looking for?
1998 Plymouth Neon Logo

405 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...