Question about 2000 Ford Expedition

1 Answer

Replace belt - 2000 Ford Expedition

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,382 Answers

Hi, You will need a 1/2" breaker bar with a handle at least 18" long. Locate the belt tensioner and release enough tension so that the belt can be safely displaced from the alternator or any other convenient appliance. Before removing the belt, make sure you make good notes on how the belt is to go back on ( or you may simply refer to the diagram under the hood). Remove the old belt. Thread the new belt into place, getting it ready for the last appliance in line. Displace the tensioner enough to safely attach the belt to the last pulley in line. Release the tensioner and remove the breaker bar. If the belt is correctly installed (make sure it is) then the job is done.
Take care

Posted on Aug 03, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change the belt on Kia fortae car


2014 Kia Forte EX Serpentine Belt Replacement - YouTube

? 6:58
https://www.youtube.com/watch?v=jqy9JgfDqok
Jul 5, 2017 - Uploaded by Five Foot
Today I replaced a broken/worn out serpentine belt on a 2014 Kia Forte EX 2.0L ... I am going to check mine ...

Alternator, Power Steering, & A/C Drive Belt Replacement "How to" Kia ...

? 19:02
https://www.youtube.com/watch?v=okMLoZY8AKE Jul 19, 2013 - Uploaded by Fixbook
Here I am going to show you how to access and remove the alternator belt, P/S belt, and A/C belt on a Kia ...

kia forte drive belt - Kia Forte Forum : Sedan / Koup / Forte5 Forums

www.forteforums.com/forums/kia-forte-2-0l.../40769-kia-forte-drive-belt.html Dec 19, 2013 - 8 posts - ‎3 authors
im trying to replace the drive belt on a 2010 kia forte ex 2.0l and was wondering if someone could get me a diagram of the belt routing as well ... 2010 kia forte serpentine belt replacement
2 posts
Feb. 21, 2018
2010 KIA FORTE LX 4DR Timing Belt or Chain
7 posts
Jun. 5, 2017
Serpentine drive belt -very frustrating-
15 posts
Jun. 17, 2014
Serpentine belt removal on a 2.4L. Anyone?
5 posts
Nov. 19, 2010
More results from www.forteforums.com

Kia Forte Serpentine Belt Replacement Cost Estimate - RepairPal

https://repairpal.com > Estimator > Kia > Forte A Kia Forte Serpentine Belt Replacement costs between $74 and $131 on average. ... The vast majority of serpentine belts only require simple tools to replace.

May 13, 2018 | Kia Cars & Trucks

1 Answer

How to change the belt on 2012 Kia fortae


2014 Kia Forte EX Serpentine Belt Replacement - YouTube

? 6:58
https://www.youtube.com/watch?v=jqy9JgfDqok
Jul 5, 2017 - Uploaded by Five Foot
Today I replaced a broken/worn out serpentine belt on a 2014 Kia Forte EX 2.0L ... I am going to check mine ...

Alternator, Power Steering, & A/C Drive Belt Replacement "How to" Kia ...

? 19:02
https://www.youtube.com/watch?v=okMLoZY8AKE Jul 19, 2013 - Uploaded by Fixbook
Here I am going to show you how to access and remove the alternator belt, P/S belt, and A/C belt on a Kia ...

kia forte drive belt - Kia Forte Forum : Sedan / Koup / Forte5 Forums

www.forteforums.com/forums/kia-forte-2-0l.../40769-kia-forte-drive-belt.html Dec 19, 2013 - 8 posts - ‎3 authors
im trying to replace the drive belt on a 2010 kia forte ex 2.0l and was wondering if someone could get me a diagram of the belt routing as well ... 2010 kia forte serpentine belt replacement
2 posts
Feb. 21, 2018
2010 KIA FORTE LX 4DR Timing Belt or Chain
7 posts
Jun. 5, 2017
Serpentine drive belt -very frustrating-
15 posts
Jun. 17, 2014
Serpentine belt removal on a 2.4L. Anyone?
5 posts
Nov. 19, 2010
More results from www.forteforums.com

Kia Forte Serpentine Belt Replacement Cost Estimate - RepairPal

https://repairpal.com > Estimator > Kia > Forte A Kia Forte Serpentine Belt Replacement costs between $74 and $131 on average. ... The vast majority of serpentine belts only require simple tools to replace.
change the belt on Kia fortae Google Search

May 13, 2018 | Kia Cars & Trucks

1 Answer

Noise sounds like a belt, only makes it in park, neutral and drive


Squealing noises are either
* a worn or loose belt. replace the belt.
* an A/C belt idler bearing. Replace belt and idler.
* alternator bearing: replace the alternator.
* timing belt idler bearing(s). Replace the timing belt and all bearings (there's a full kit for this).

Oct 03, 2016 | 2005 Subaru Outback

1 Answer

Replace belts/how to?


Belts are the easiest thing to replace with a wrench, and a prybar.
If you have a serpentine type belt, use a 1/2" breaker bar to relieve tension on the belt, noting the routing of the belt.

If you have a v-belt, there will be an accessory such as an alternator that has adjustment bolts on it to tighten or loosen the belt.

BELT ADJUSTMENT
  1. Loosen the tension adjustment and mounting bolts.
  2. Move the pump toward or away from the engine so the belt deflects 1⁄41⁄2 in. (6–13mm) midway between the idler pulley and the pump pulley under moderate thumb pressure.
  3. Tighten the bolts and recheck the tension adjustment.
The following describes varioius types of belts and their inspection:
Belts
INSPECTION Check the drive belts for glazing, cracks, fraying, wear and tension every 6,000 miles (9,662 km). A glazed belt will be perfectly smooth from slippage, while a good belt will have a slight texture of fabric visible. Cracks will usually start at the inner edge of the belt and run outward. All worn or damaged drive belts should be replaced immediately. It is best to replace all drive belts at one time, as a preventive maintenance measure, during this service operation. It is recommended that the belts be replaced every 24 months or 24,000 miles (38,647 km). Belt deflection at the midpoint of the longest span between pulleys should not be more than 7⁄16 in. (11mm) with 22 lbs. (10 kg) of pressure applied to the belt when engine is cold. Fig. 1: There are typically 3 types of accessory drive belts found on vehicles today tccs1218.gif
Fig. 2: An example of a healthy drive belt tccs1214.jpg
Fig. 3: Deep cracks in this belt will cause flex, building up heat that will eventually lead to belt failure tccs1215.jpg
Fig. 4: The cover of this belt is worn, exposing the critical reinforcing cords to excessive wear tccs1216.jpg
Fig. 5: Installing too wide a belt can result in serious belt wear and/or breakage tccs1217.jpg
prev.gif next.gif

Jul 04, 2010 | 1996 Nissan Sentra

1 Answer

1996 toyota corolla life of timing belt


Average replacement mileage for a timing belt is around 60,000 miles. Many cars I have purchased had over 100,000 miles on them and had never had the belt replaced. Try to use original equipment belts or high quality after market belts when replacing. Cheap belts will not last as long and could cause serious problems if neglected(example cheap alternator belts will squeak, stretch easily, and not hold up.). I always replace all the belts when doing a job this intense. If your car has high miles it is a good idea to replace the water pump at the same time you do the timing belt.

Apr 25, 2010 | 1996 Toyota Corolla

1 Answer

My serpentine belt went how do i change the belt do i need a special tool


Identify which belts need to be replaced. If you are replacing the air conditioner belt, you may need to remove the alternator belt because of the way the belts are shared on the crankshaft pulley. As a result, some mechanics recommend replacing both belts together.
  • Step 2 Loosen the lock bolt for the belt you are replacing using owner's documentation. The lock bolt will be near the belt tensioner component.
  • Step 3 Turn the adjustment bolt to change tension on the belt. When the belt is loose enough, slip it off.
  • Step 4 Use your memory or a belt routing diagram to install the new belt on all pulleys.
  • Step 5 Adjust the adjustment bolt to replace tension on the belt. Tighten the lock bolt.
  • Step 6 Make sure the belt is correctly seated on all pulleys and that the ribs fit into grooves on the pulleys.
  • Step 7 Run the engine and check for any flapping or looseness that could indicate incorrect installation.
  • This was copied from the service manual.
  • Jan 24, 2010 | 1995 Dodge Intrepid

    1 Answer

    How often should you get engine belts replaced and what belts need to be replaced?


    Replace belts as needed, check for cracks on the sides of the belts or pieces missing from belt. A good belt should last 100,000 miles. and it is a good practice to replace at 100,000 even if it looks good. REPLACE ALL BELTS as needed.

    Jan 18, 2010 | 1996 Nissan Pickup

    4 Answers

    How can i stop my AC belt from making noises when my AC is on


    The reason your belt is making a noise is either your belt is worn and needs replacing or the belt tension is out of adjustment and needs checking and adjusting.
    It is a good idea to replace it anyway specially if the belt has small cracks on the inside.

    Jan 13, 2010 | 2001 Nissan Maxima

    5 Answers

    How often do you replace a serpentine belt? I replaced it in 2007/ my last report from toyota says that it is cracking AND I assumed that it was the serpentine belt- but maybe there other belts in a car?...


    There is only one serpentine belt in your car. The belt's usually last much longer then 2 years, best thing to do is go to a parts store like Auto Zone or Parts Source and they can inspect the belt for you and show you how to inspect the belt. It's not the out side that you inspect, but the inside where the ribs are. Inspect the ribs for cracks or missing ribs, you can also maintain the belt by purchasing belt re-conditioner. The re-conditioner will keep the belt from getting to hard and cracking and give you longer life, Auto Zone can also give you the step by step instructions for you to replace your own belt if you need to. Good luck and hope this helps.

    Nov 01, 2009 | Toyota Corolla Cars & Trucks

    Not finding what you are looking for?
    2000 Ford Expedition Logo

    Related Topics:

    77 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Ford Experts

    Marvin
    Marvin

    Level 3 Expert

    81424 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22359 Answers

    gerry bissi

    Level 3 Expert

    4376 Answers

    Are you a Ford Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...