Question about 1992 Mercury Grand Marquis

1 Answer

I need to replace my speakers in my back window but i cant get the carpet stuff off the top by the back window

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 1,305 Answers

Most of the rear window speakers mount from the underside in the trunk.
Check there to see if you can unhook and remove the speakers from the trunk side before tearing up the interior covering.

Posted on Aug 03, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do i install 6x9 speakers in a 1995 oldsmobile cutlass ciera?

No brackets are necessary...I believe you are talking about replacing the rear speakers located in the rear wondow shelf...Of course the speakers mount underneath the window inside the trunk...You can remove the rear seat and pull the interior trim back to view the top side of the speaker mounting...The opening is already cut for the 6X9 speaker...You can mount the top underneath the window cloth material like the factory did, or no need to remove the interior cloth if you use new top speaker covers, usually come with the speakers. Hope this helps.

Sep 06, 2012 | Cars & Trucks

2 Answers

I want to upgrade the speakers by the back window but want to know how to remove the carpet to get to the speakers.

dont remove the carpet you will have to remove the stock speakers from inside of the trunk

Oct 22, 2010 | 2003 Mitsubishi Galant

1 Answer

Replacing my rear struts in my 2000 mercury sable. i removed the carpet from the trunk walls and cant seem to find the bolts that attatch the strut itself. it seems to be encased by metal. how do i get to...

the top bolts are basicly in the back window of the car you have to remove the back seat and the panel below the back window and there right there

Oct 06, 2010 | 2000 Mercury Sable

1 Answer

How to replace rear shocks on 96 bmw 328i

Inside the car carefully pry up the speaker covers off the rear parcel shelf and undo the two screws that secure the speaker assembly onto the shelf. Release the clip and carefully from inside the boot pull the speakers away and disconnect the speaker connections
Open the boot and remove the carpet from the rear "wall" by unscrewing the 4 retaining "nuts" at first by hand and then using a phillips screwdriver.

Lift this out and lift out the floor carpet. Carefully pull the side carpets away from the boot interior. They are held in 3 places : on one of the retaining bolts by the rear carpet, by a metal ledge at the top near the rear lights and by the ledges on the plastic parts in the boot.

Jack up the car and chock the front wheels so it can't roll anywhere. Also put something underneath the wheels so they cannot drop down when you undo the shock mounts.
Using a 13mm socket undo the two top shock mounts ONLY once you have supported the wheels so that you dont put stress on the suspension arms. Pry off the rubber dust cover.
Undo the lower shock retaining bolt and carefully lift the entire shock away from the car.
The old knackered shock and shock mount!
You need to recover the lower cup, upper cup and bump-stop from the old shock. To do this you need to remove the top mount from the old shock. If you look at the top of the piston it has a flat section to it. Get a set of mole grips and clamp them onto the flat section, do this as tight as you can so that you dont round it and using and adjustable spanner undo the piston retaining nut whilst holding the piston shaft using the molegrips.
You need to recover 3 pieces from the piston shaft. 1- the bump stop, 2 - lower cup, 3 upper cup. Using the new shock mount as a template cut out a gasket from cardboard (the box the mount came in is ideal) to go between the upper shock mount and the suspension tower. Incidently according to the haynes manual this is made of rubber but mine was made of card! under no circumstances put the upper shock mount directly into the suspension tower.
Put the 3 pieces onto the new shock and tighten the piston nut to secure the shock mount and put your new gasket onto the upper mount.
Use the opportunity to clean the suspension turret - do the top and the underneath making sure it's all clean and dry.
Put the new complete assembled shock into the suspension tower and either get someone to do up the top bolts a few turns or rest the bottom of the shock in the inner circumference of the wheel and lift it into position by lifting it up using the piston nut and then do the bolts up a few turns.
Bolt the bottom shock bolts back into place after putting some nut-lock on the threads and tighten them up securely, then tighten up the top mount securing bolts and put on the rubber dust cap.
Put the side carpets back in making sure the speaker cables aren't trapped behind, putting in the end nearest the tail lights first making sure it's behind the retaining ledge both at the top and the end. Then do the centre section and finally over the bolt at the rear of the boot. Put the rear carpet back in and do up the retaining nuts. Reconnect the speakers and engage the lip and push the speaker up until the clip clips into place and do up the securing screws and clip the speaker cover back on.

About What's New BMW In-Depth How To Pages My Projects Garage Sale Galleries Communities Links Contact Donate

Jul 07, 2009 | 1999 BMW 328 Series

1 Answer

1993 Volvo 850 How do I remove the Center Console

if you cant find any plastic that pops out and has screws underneath carpet inside center console if any, try pulling the switch itself and or assembly out. hit contacts with an eraser. and your favorite stuff. get a good manual.

May 24, 2009 | 1993 Volvo 850

1 Answer

Need to replace rear speakers in 1998 deville.... how is this done?

If it is the factory installed speakers.They are come out thru the inside.You need to remove the rear deck carpet...Easiest way is to remove both back seats first .
Remove the bottom seat first by pushing the seat towards the back of the car / then lift it up.
Then you will release the other seat by (using a socket set) to remove 2 nuts inside the trunk.then the seat will be release to simply lift out of the car. remove the top deck carpet .
The speakers are held in by 4 angled clips.
From inside the trunk, release the 4 angled clips,disconnect the speaker wires.Then push the speaker inside the car and your done. Hope this helps.

Feb 22, 2009 | 1998 Cadillac DeVille

1 Answer

Rear window wont open

IF YOU get in the back the panel will have a slot behind the carpet this will be in center right at top of carpet area on plastic panel pull carpet back and you can slide a screwdriver in there and move actuator to open

Jan 26, 2009 | 2003 Chevrolet Blazer

1 Answer

1999 Cavalier Speaker Removal

The rear speakers you need to take at least one side off. What I mean is the part when your sitting in the back seat the plastic piece were the armrest is. After you take at least one or both of these out just fold the seats down and the rear window carpet piece will have four plastic push pins then just pull it straight back and its out. After the carpet is out just unclip the speaker and pop it out then unplug the harness.

The front first you need to take the screw out of the small piece up by the side mirror and pull that piece out, then pull the metal clips for the window cranks, if you have manual windows. then the screws in the grab handles, the rest is just plastic clips. Just either get a specialty tool for this or I use a butter knife and slowly pry the door panel up and work it around the entir panel until its loose. sometimes no matter how hard you try to be carefull the clips will break though. They are failry cheap if they do and autozone should have them. after the panel is off it is pretty simple just take out the screws holding the speaker and pop it out then unplug the harness.

Jan 04, 2009 | 1999 Chevrolet Cavalier

1 Answer

Trunk access from behind the seats

on both side behind the rear speakers, if u unbolt the speakers there is enough space that you can fit your arm through and make it poke out in the trunk....and in the trunk you just remove the carpet to get through, you can out that back when your done

Aug 13, 2008 | 1995 Honda Civic del sol

1 Answer

Solenoid was bad replaced it fuel relay was making a bad vibrating noise replaced that truck will turn over but now cant her fuel pump running will not start up

Check the fuel pump cut off switch located behind the carpet on the passenger side up unde the heater box, pull the carpet back and see if the button on top of the switch is pressed down, if not there behind the panel passenger footwell right side same thing also make sure the switch has power coming in and going out. BUT! you gotta be quick the fuel pump relay controls this power and only suppllies power for 2-3 seconds then it turns off. so plan ahead get your test equipment all set-up and surn the ignition on if you have power great turn off the key and move test stuff to tho other wire on the fuel shut off switch get ready and turn on the key power good no power bad fuel pump switch but No power to the switch likely a bad ffuel pump relay.

Aug 03, 2008 | Ford Ranger Cars & Trucks

Not finding what you are looking for?
1992 Mercury Grand Marquis Logo

Related Topics:

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

gerry bissi

Level 3 Expert

4376 Answers


Level 3 Expert

81400 Answers


Level 3 Expert

5687 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides