Question about 2007 Chevrolet Silverado 1500HD
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
I wonder if you dont have a bad switch. I had a similar problem on my car except that it was the heated seats that would not engage... the power seat buttons all worked just fine. I changed the switch and it fixed the problem...
Note: this was on a BMW not a Murano
Posted on Dec 31, 2008
I AM NOT GOOD WITH UPHOLSTERY BUT I BUY ON EBAY ONCE IN A WHILE AND I FOUND A GOOD UPHOLSTERY GUY THAT YOU CAN GET THIS SEAT OR JUST THE BOTTOM FROM IF YOU NEED IT .. I HAD HIM DO ME ONE FOR MY LEATHER SUBURBAN AND WOW ITS NICE AND I PUT IT ON EASILY THE HARD PART WAS TAKING THE SEAT OUT THEN FOUND OUT IT WAS A SNAP TO PUT ON .. THE GUYS NAME ON EBAY IS upholsteryguys IF YOU NEED ANY HELP WITH THIS LET ME KNOW YOU WILL BE IMPRESSED WITH HIS WORK.. AS FAR AS THE HEATED SEATS AND THE LUMBAR GOES YOU MIGHT FIND THE PROBLEM WHEN YOU GET IT APPART PUTTING ON THE COVERS .. USUALLY THEY GET BAD CONNECTIONS AFTER A WHILE.. THANKS JERRY AND HOLLER IF YOU NEED MORE.
Posted on Apr 20, 2009
the air lumbar is an air bladder in the seat that is inflated by an air pump. Either the Check valve in the pump has failed and not holding air in the baldder, or the bladder has cracked and is leaking. May be possible to find another seat at a junk yard that is the same as yours. Replacing the entire seat is simpler then replacing just the bladder and pump assembly.
Posted on Oct 06, 2009
No fuse.These seats are protected with relays and a seat module.The module is under the drivers seat.There are 3 connectors and it would be hard to check all these wires for power to the motors.First look under the seat and make sure none of the connectors came apart under the seat by something that might have been left or rolled under it.The 2 main ones you can check are the connector 2 terminal C and connector 3 terminal A.C is a black wire which is ground and A is a red wire which is the feed power wire.Connector 2 is green and 3 is black.If the ground and power wires are good then you could have a bad drivers seat module.What I would do is go to the salvage yard and find a used module to try.Good luck.
Posted on Dec 07, 2009
Testimonial: "Thanks for your assistance. Great information"
Tips for a great answer:
Apr 08, 2016 | 2007 Lincoln MKZ
Mar 27, 2014 | 2006 Chevrolet Trailblazer Ext
Dec 07, 2012 | 2010 Chevrolet Silverado 1500
Oct 20, 2012 | 2003 Pontiac Bonneville
Sep 17, 2012 | 2010 Chrysler Sebring
May 09, 2010 | 2004 Saab 9-3
Oct 21, 2008 | 1997 Chevrolet Tahoe
404 people viewed this question
Usually answered in minutes!