Question about 2005 Jeep Grand Cherokee

2 Answers

2005 grand cherokee blower motor only runs in high no med or low speed,

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the same problem and solved it by replacing the blower motor resistor. It's an inexpensive part (under $10) and fairly easy to replace. You have to remove the glove compartment door (snaps out easily) and the resistor is behind it held in by two screws (Torx, I believe).

Posted on Aug 12, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 432 Answers

Change your blower motor resistor, usually that is the last one to go out is high. Also be sure to check your fuses as a just in case.

Posted on Aug 03, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My fan on my 2005 Jeep Grand Cherokee was only running on high speed. Replaced the resistor, and now its and intermittent problem. Sometimes all speeds work, sometimes only the high speed works. What now?


Checking the connector at the resistor with the unit turned on you'll find your problem, replug it in with the unit running on any thing but high and you'll see whats going on. the plug might be burned up and making a poor connection just replugging them many times fixes most of them and you can get a new plug if nessary. if it's burned up it's likly that the blower motor needs to be replaced as it's drawing too much power and it's common as the motors get older that they need to be replaced..

Feb 28, 2011 | 2005 Jeep Grand Cherokee

2 Answers

2005 jeep AC and heater blower only high speed works


check fuses, then wiggle speed control while moving, may need new dash control for lower speed, usually high speed works through relay may be the reason high speed works

Nov 03, 2010 | 2005 Jeep Grand Cherokee

2 Answers

Were is the low speed fan control relay located at


There is not one,it has a blower resister that e\includes the low,med.and if there is one a med-high it is a module,and it has multi wires going to it,and is mounted on the blower box near the blower motor.

Jun 08, 2010 | 2005 Chrysler Town & Country

1 Answer

Air/fan/heat only works on high in 2005 Jeep Grand Cherokee, or it will start again if I open and slam shut my glove compartment.


Check the blower motor speed dropping resistor pack and it's connections. It is located in the ducting airflow of the blower motor.

Jul 17, 2009 | 2005 Jeep Grand Cherokee

1 Answer

Blower motor 95 jeep Cherokee


Hi Craftsman,
I suffered a similar failure on my little Rover. I think you will find out the resistor on the blower has had it. It is probably similar in theory. The resistor block contains several resistors. As you alter the blower speed, different resistors are used. One of yours has obviously failed. You need to replace the resistor block, which may be located at the back of the engine bay, on the passenger side, under the wiper module. Or you can remove the resistor block and replace the failed resistor - a competent auto-electrician can do this, or advise you how to.

Jun 30, 2009 | 1995 Jeep Grand Cherokee

2 Answers

Heat/AC Blower fan speed only works on High


hello, this sounds like a bad blower motor resistor!! its cheap and easy to change..if you need more info on locations let me know,, good luck.....marty

May 27, 2009 | 2005 Jeep Grand Cherokee

1 Answer

Replaced blower motor, now runs continuously.


Run's continuously ? High speed , low , med 1,2, 3 . ????
Probably the high speed relay contact's stuck closed . The fuse for the high blower is hot at all times , low blower fuse is hot only with key on. It sparks becaused the motor turns on . If it had a short the fuse would blow . The blower motor relay is part of the resistor pack near the blower motor .

Oct 01, 2017 | 2000 Oldsmobile Intrigue

Not finding what you are looking for?
2005 Jeep Grand Cherokee Logo

202 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...