Question about 2008 Chevrolet Silverado 2500HD 2WD

Open Question

How do u take apart an 08 silverado steering wheel

How to take apart an 08 silverado steering wheel

i cant figure out how to take apart the airbag cover with out rippin it

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
chiquititas
  • 1010 Answers

SOURCE: horn cover

it takes a special puller to remove the steering wheel. the air bag just pops out with a release tool in the release hole on the side of the steering wheel

Posted on May 15, 2008

Ad
  • 1 Answer

SOURCE: Horn stopped working and now get airbag light...

I had the same problem in my 98 Dodge Grand Caravan. The problem was the "clock spring" cable in the steering column. A flexible cable connects the horn, air bag, and in my case the cruise control to the rest of the car. Chrysler fixed the problem at no charge. It is a recall item that they will fix if it fails. Ford may possibly do the same thing. I had my car fixed last year.

Posted on Apr 02, 2009

  • 636 Answers

SOURCE: 2004 Silverado 2500HD. Airbag/Steering wheel control issue

Try unhooking the positive post on the battery this should reset the system. As far as the radio controls and airbag, this shouldn't be related the changing parts. Try checking the fuse panel for burnt out fuses.

Posted on Aug 11, 2009

SOURCE: how to take the steering wheel cover off without

Are you talking about the large part in the center of the steering wheel? If so, that is the air bag. The cover of it doesn't come off and is part of the air bag assembly.

Posted on Jul 31, 2010

duane_wong
  • 6826 Answers

SOURCE: have 1999 buick lesabre limited turn signals do

if turn signal does not work, check the bulbs and the flasher. The flasher should be located under the dash near the steering column, but it's not necessary to take the steering wheel off unless the turn signal switch itself is bad.

Posted on Oct 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 07' MK5 GTI and i need help figureing out why im getting absolutly no boost. ive used the vagcom reader and it threw some codes that i have no freaking clue about please help me.


so,you have Malfunction 0010 03-ABS Brakes -- Status: Malfunction 0010 04-Steering Angle , Status: Malfunction 0010 0F-Digital Radio -- Status: Malfunction 0010 15-Airbags -- Status: Malfunction 0010 42-Door Elect, Driver -- Status: Malfunction 46-Central Conv. -- Status: Malfunction ,start by repairing these codes to figure out your boost problem

Apr 26, 2015 | Volkswagen GTI Cars & Trucks

1 Answer

How to replace horn button on 2003 1500 hd, multi-function steering wheel


I HAVENT HEARD OF A HORN BUTTON..BUT THEIR IS A RED WIRE BEHIND THE AIR BAG THAT WHEN PRESSED IT MAKES CONTACT WITH THE STEERING WHEEL ALLOWING THE HORN TO GO OFF.SOMETIMES THEY BREAK,BUT YOU WILL FIRST NEED TO REMOVE THE AIR BAG.YOU MUST DISCONNECT BATTERY TO DO SO.YOU WILL NEED A SMALL SKINNY FLAT HEAD SCREW DRIVER OR A PICK TOOL TO REMOVE AIRBAG.YOU HAVE TO SPRED THE LOCK CLIPS APART ON EITHER SIDE OF WHEEL.GET A MIRROR AND PUT BEHIND STEERING WHEEL TO SEE THEM...........YOU MAY ALSO CHECK THE HORN RELAY IN FUES BOX UNDER HOOD,,OR OTHER FUESES.ALSO ITS POSSIBLE THAT THE HORN OR HORNS ARE BAD.

Aug 08, 2011 | 2002 Chevrolet Silverado 1500HD

1 Answer

The key will not turn over to kick over the starter. i got a new key assembly but cant figure out how to take the wheel apart to put it in


there are some videos on youtube showing replacement of the lock cylinder on various GM products. from the few i have watched it is more of removing the cosmetic plastic pieces around the steering column as opposed to removing the steering wheel. if the car has an airbag, you do not want to pull the wheel off anyway unless you are trained.

Jun 30, 2010 | 1991 Oldsmobile Cutlass Cruiser

1 Answer

How do i remove the ignition swicth from a 2004 chevy siverado 1500


The procedure to remove the ignition switch is
  1. Start by disconnecting you negative battery cable.
  2. Wait at least 1 minute to disable your airbag system.
  3. Remove the airbag from the steering wheel, it's retained by a couple bolts on the back of the steering wheel.
  4. Disconnect the wires to it, and set it aside.
  5. Remove the clip that is above the lock nut for the steering wheel, then remove the lock nut.
  6. You need a steering wheel puller to pull the steering wheel off. After you remove the steering wheel, you should have access to the turn signal switch.

Sep 18, 2009 | 2004 Chevrolet Silverado 1500 Crew Cab

2 Answers

2004 Silverado 2500HD. Airbag/Steering wheel control issue


if you have an anti-theft radio option, when you disconnect the battery you disable the radio. there is a code you need to activate so this does'nt happen, but you must do it before you disconnect the battery. by taking the truck to a dealer, he will use the VIN number and the radio serial number to get the reactivation code from the GM tech service computer bank----------just another example of the useless **** GM puts on their vehicles and costs their customers more money and time.

Aug 11, 2009 | 2001 Chevrolet Silverado

1 Answer

Do i have to remove strg wheel to replace ign switch???


Yes the steering wheel must be removed, this requires special tools, a steering wheel puller and a wheel lock ring spring compressor, u must also dis-arm the Airbag system, failure to do this can allow the Airbag to go off and cause grave perasonnel injury.

May 22, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

Service Airbag warning on cluster in 04 Silverado 1500


the most common cause of this light is an open circuit in the coiled ribbon contact to the steering wheel airbag, it is under the steering wheel, it looks like a clock-spring and it always the steering wheel to move while maintaining a physical electrical connection to the airbag module on the steering wheel, after thousands of times of coiling and un-coiling it breaks and then the airbag diagnostic monitor senses the open electrical circuit and turns the light on. U must disarm the airbag to remove the steering wheel to replace this contact, if this is not done the airbag can fire and cause serious injury.

Jan 14, 2009 | 2003 Chevrolet Silverado 1500

1 Answer

Ifomation center going haywire


You need to replace the steering wheel rotatating contact, it is shorted, the part is called the clock-spring contact. In order to replace this part u must remove the steering wheel, u MUST disarm the steering wheel mounted airbag before doing this, if u don't the airbag can fire and cause serious injury.

Jan 11, 2009 | 2003 Chevrolet Silverado 1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

336 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

81423 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22359 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...