Question about 1995 Chevrolet Blazer

1 Answer

I have a 95 blazer that will go into 1st and 2nd gear but as soon as it is supposed to go into drive the engine revs and it feels like it shifts into neutral. i changed the tranny, celanoid, and computer. it still has the same problem. not sure what else it could be! please help!!

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 447 Answers

If there aren't any remaining elecrtronic control related service codes then you may have an internal clutch pack problem which is causing the transmission to slip fully when it tries to go into any gear after second. Not to uncommon to see these symptoms when that happens but a good transmission shop should be able to diagnose what is wrong quite easily so you would know for sure. If the problem is internal then the transmission would need to be removed and repaired or replaced.

Posted on Aug 03, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Transmission slipping in 2nd gear


1 Ck A/T fluid level & quality
2 Scan/ck for code(s)
3 With scan tool connected,road test vehicle/Ck parameters....
....time for a pro !!

Apr 06, 2014 | GMC Sierra Cars & Trucks

1 Answer

VW 2013 Golf Automatic stays in 1st gear when driving uphill. Have to pull over after hill, stop, park and then go for engine to autocorrect. VW service center mechanic says this is how it's supposed to be...


There is no problem with the revs going to 3 or 6. The revs need to climb so you have enough power to climb the hill (if the car upshifts under heavy load it may stall). But are you saying that the only way you can get it to shift out of first is to turn off the car? if so, then that is obviously not supposed to happen. It should shift shortly after you start driving down hill.

Aug 20, 2013 | Volkswagen Cars & Trucks

1 Answer

1995 Ford Bronco engine dies when shifted into drive but runs in reverse or 1st gear


Could be fuel filter,air filter,tune up,wires,coils.low idle too low.

Jun 13, 2013 | 1995 Ford Bronco

1 Answer

Only reverse works. No foward gears.


No forward movement in OD or D, but L2, L1 and R work: Forward sprag is broken. R&R. Try not to run or drive the car or further damage could result.

Do you have manual 1st? If so, can you shift through the gears...i.e. manual 1st to manual 2nd then 'D' then 'OD'??? Only 1st and 2nd gears use the forward sprag unless the LO/Rev clutch is engaged...i.e. 1st and 2nd if in "drive". If you can shift threw the gears manually then, yes, your forward sprag broke.

If no manual 1st then your sprag is not what broke. Sounds like you blew up the rear planet. If you pull the pan and find chunks of iron and steel, then that is probably what happened. If you have reverse then it is not the pump. If the pump was bad you would have no line pressure and it would slip in rev. or no rev. Not the beef sun shell either because you have rev., a broken sun shell would cause no 2nd, 4th and rev. gears. Either way the trans needs to come out and torn down and it will be easily found what went. Good luck and thank you for using Fixya.

Mar 06, 2010 | 1991 GMC C1500

2 Answers

The engine rpms rev when shifting


Your trans is slipping, u are going to need to have it checked out at a trans shop, they will test drive it in most cases for free and report what they think is wrong or recommend more diagnostic work if they are unsure..

May 21, 2009 | 1999 Honda CR-V

2 Answers

Slight miss in engine, hard shift from 1st to 2nd long 2nd gear


Check both O2 sensor(s) and catalytic coverter.. P0420 means catalyst below threshold. Also check the sensor at the transmission and solenoid.

Feb 06, 2009 | 1995 Chevrolet Blazer

1 Answer

2000 Camry won't shift out of 1st gear


Check all your fuses. The ones in the car. and check if there is some under the hood.

Nov 22, 2008 | 2000 Toyota Camry

1 Answer

2nd gear clutching


STOP Downshifting!
STOP Forcing gear change, watch the Engine RPMs and shift accordingly, HOMBRE's are as good as the operator's. Hombre's have dash shift indicators which illuminate when it's time to 'shift' and not before, This has nothing to do with gear oil either. If you've drained it, you best fill it immediately and make sure it's ample level. The heat these gears sustain in is inceredible, cooling lubricant is essential. Here's a tip, while engine is OFF, ignition key is engaged, dash is illuminated, depress clutch peddle, keep it depressed and walk through all gears with gear shift, shifting should be smooth and unpeded, including reverse. If resistance is experienced at one or more gears, gear alignment is off as a result of inproper gear shifting while driving. Continue to drive vehicle just shift slower until clutch needs replacement then do an entire drive shaft upgrade. It worth it, it's great truck.

Jul 25, 2008 | 1998 Isuzu Hombre

Not finding what you are looking for?
Cars & Trucks Logo

106 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...