Question about 1995 Geo Metro

1 Answer

How do you remove and replace a water pump on a 1995 geo metro lsi

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 429 Answers

Ok here is the low down.
To replace the water pump you must remove the timming belt as well as many other items.
Are you mechanicaly inclined or would you be better off having a pro handle the job? They have the tools to make it easy.
Let me know i'll give you step by step if you want it, but it is a long procedure.

Posted on Aug 10, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the fuel pump and fuel filter located on a 95 geo metro lsi


Lay down along side the car by the drivers door. Look under the car and there is the fuel filter. It's strange by that's where it's located. Is your car a 1.3 L 4 cyl ? I know those engines like that back of my hand if you need further help.

Dec 13, 2014 | 1995 Geo Metro

1 Answer

1995 Geo Metro Head Gasket Leaking Coolant


best to change the headgasket n be done with it

Jan 02, 2014 | Geo Metro Cars & Trucks

1 Answer

I took motor/tranny out of well maintained/well running 1994 Geo metro xf and installed them in a 1995 geo metro LSI. everything went well i had to use the 1995 intake and throttle body due to wiring...


Yes, because the specs are different... most manufatures change the specs on vehicles every four years, so 90-94 is most likely all the same, but then you will have 95-99 an so on an so on.. Good Luck

Oct 23, 2010 | 1995 Geo Metro

1 Answer

Headlights keep flickering


Check the wiring to the headlight. Maybe where the headlight wires meet the headlight are loose. Sounds like a wiring issue.

Jun 18, 2010 | 1997 Geo Metro

1 Answer

Do the valves need to be adjusted on a 92 geo metro lsi


No. Geo Metros use hydraulic lifters which can not be adjusted. If you Metro is making excessive valve noise, the lifters are probably worn out or the oil level is low.   

Feb 27, 2010 | 1992 Geo Metro

2 Answers

My 1997 geo metro sqeals when started


this could be the serpentine belt at the front of the engine it could be warn and needs replacing, but this could also be the signe of a warn bearing ie idler bearing, waterpump bearing, alternator bearing, power stearing pump bearing, best to get it checked, as a belt is only a few bucks, where as the others could be allot more, should i say will be...hope this helps

Feb 12, 2010 | 1997 Geo Metro

1 Answer

Free photo diagram of belt routing


Hope you did the timing belt too, or back up and cover that now.
I believe it goes
Inner belt, crank, alternator, water pump, crank
Outer belt, Crank. a/c, tensioner (backside), Crank

Jan 24, 2010 | 1995 Geo Metro

1 Answer

Bad water pump


Here's a link to help you decide if you want to tackle it yourself. For quote on having it done in your area, go to (repairpal .com)

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c15280048711

Mar 08, 2009 | 1995 Geo Metro

1 Answer

Where to fill gear oil in manual 5 speed 1990 geo lsi


It should be the same place as a 1991 Metro, on the back side of the transaxle there is a plug that takes a 15/16 wrench to remove. the plug faces the drivers side tire. If oil drips out when you remove the plug it is full. Otherwise use your finger to see if you can touch the oil. Fill with some type of syringe. jeb

Dec 29, 2008 | 1991 Geo Metro

1 Answer

High-beams not working


U are going to have to replace the mulitfunction switch if the bulbs are not the problem

Nov 16, 2008 | 1995 Geo Metro

Not finding what you are looking for?
1995 Geo Metro Logo

Related Topics:

174 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geo Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...