Question about 2006 Jeep Grand Cherokee

1 Answer

Remove rear brakes from 2006 jeep grand cherokee laredo

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Its very easy. Pull tires off after putting vehicle on jack stands. There are only 2 bolts that holt the caliper on the rotor. Once you remove those bolts, the caliper will slide off. the break pad removal can be a little tricky, as you must depress a button with a screw driver in order to get he pads out. I recommend having two people to do this part. Once the old pads are out, us either a c-clamp or a pair of chanel locks to push the piston back in. Once the piston is back in, insert the new pads, place the caliper back on the rotor and reinsert the two bolts. I dont know the specs of the bolts, but be sure not to tighten them too much as you can damage parts to the brake system. It literally took me 20 minutes to do my brakes.

Posted on Aug 03, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No pressure or fluid to rear brakes 99 jeep grand cherokee laredo


check the abs control unit. there is 2 lines that from the master cylinder that feed it,and there is 4 lines that come off it. 2 of the lines go to the front brakes and the other 2 go to the back brakes

Feb 01, 2013 | Cars & Trucks

1 Answer

REAR BRAKE SHOE ASSEMBLY DIAGRAM


You can go to autozone.com and register for full free online repair manual that has the diagrams you need and everything else you could want.

Nov 18, 2009 | 2002 Jeep Grand Cherokee

1 Answer

How to take front rotors off 2006 jeep grand Cherokee


Remove the brake calipers and the rotors should come right off. If not, spray solvent into wheel stud holes and around the rotor/hub parting line and use a rubber mallet on the rotor (You can also use a piece of 2x4 and lay it across the rotor and strike it with a regular hammer.) From time to time some manufacturers use a flat screw installed in the rotor to hub face, to keep rotor on while going down the assembly line...check to make sure there aren't any on yours.(though I don't remember ever seeing any on Jeeps)

Sep 04, 2009 | 2006 Jeep Grand Cherokee

1 Answer

2000 jeep grand cherokee laredo has scrubbing noise coming from rear of vehicle and park brake does not engage


It sounds as though you have a frozen emergency brake cable. This usually will wear down the rear brake shoes to a point where they are metal to metal. Get them fixed asap.

Jun 26, 2009 | 2000 Jeep Grand Cherokee

1 Answer

2006 Jeep Grand Cherokee Laredo ac not cooling


My 1999 limited does this. When i bought it off the guy he said that its because of some flap down by the passengers left foot. In mine the passenger air barely even blows because of this.

Jun 17, 2009 | 1999 Jeep Grand Cherokee

1 Answer

Rear Axel Seal Leaking, How do I pull the axel to repair?


You will need to remove the differential rear cover,drain fluid, remove wheel, brake drum, (rotor) . Unbolt center diff. pin, carefully remove (don't loose shims) push axle in remove lock keeper, then slide out axle, replace seal, put some grease on it, slide axle in reverse all to install.

May 22, 2009 | 1999 Jeep Grand Cherokee

4 Answers

Rear end (axle)


call jeep and give them last 9 digits of your vin and ask for three things -Differential Type,Gear ratio, and Track lock- They will give you
1) Dana 35 or 44
2) Gear Ratio 3.31 or 3.73
3) Track Lock - yes/no

Jan 11, 2009 | 1998 Jeep Grand Cherokee

Not finding what you are looking for?
2006 Jeep Grand Cherokee Logo

1,150 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...