Question about 1999 Nissan Maxima

1 Answer


Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,033 Answers

You will first need to find out what type of bolt is in the tensioner pulley. Once you find out, you will need that tool,prefer on a socket. You will need a breaker bar or a ratchet with a leverage bar to use for ease. Make note of the belt diagram and pulleys. Once you insert the socket and breaker bar into the tension roller, push the bar and the belt will loosen up the more you push, once you get the belt off of one roller, it"s easy rest of the way. You basically have to releive tension on a spring loaded arm to loosen the belt,

Posted on Aug 03, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Need to replace both serpentine belts on a 1998 nissan maxima

the belt diagram should be under the hood some where near where the belts are

Dec 24, 2013 | 1994 Buick LeSabre

1 Answer

How to remove the belts from crankshaft damper on nissan maxima 1996

If you have the older style V-Belts you have to lossen
a couple of the accy's--alternator,power steering pump,
air pump,etc

For a single serpentine belt- you just pull the tension of the
spring loaded belt tensioner

You may have to remove a plastic or rubber splash shield
as well as a tire & work thru the wheel well & over the sub frame

Jan 26, 2013 | 1997 Nissan Maxima

2 Answers

Both belts snapped off while driving my 2000 nissan maxima gle- 80,000 miles on both belts - now I have to replace them - I have taken off the right front tire and have gained access to pulleys'. In order...

belts dont just "snap" find out what happened. there will be bolts and slots to loosen and tighten PS belts on pump, and a tensioner pulley on th ealt belt. on the idler.

Oct 13, 2009 | Nissan Maxima Cars & Trucks

1 Answer

Maxima 2006 drive belt

First, keep this link which is to the diagram of the serpentine belt. It will be useful in knowing how to route th new belt...

Next, here's a link to a good video on how to replace a serpentine belt...

Sep 12, 2009 | 2000 Nissan Maxima

1 Answer

Both Serpentine belts

The power steering pump will have a tensioner you need to loosen. Then for the other belt. There is a tensioner located on the pass side. You can see it if you look down the pass side of the engine.

May 11, 2009 | 1995 Nissan Maxima

1 Answer

Replace the power steering belt on 1998 Nissan Maxima

you need to remove the front belt to even get to the rear belt.  Try accessing it from underneath.

Mar 21, 2009 | 1998 Nissan Maxima

1 Answer

How to replace serpentine belts 99' Hyundai Elantra.

you might need to get a prybar or something such long, and try to pry it off the belt, it should go easy right away. It is a spring-inside assembly, and won't brake. There also could be a 3/4 hole in it, look from a side. It's for middle size ratched, it can be used to loosen the tensioner from serp. belt.

Mar 18, 2009 | Hyundai Motor 1999 Elantra

1 Answer

Is there a tensioner pully on a 2004 nissian maxima?

Yes. One for the timing belt, and one or 2 for the serpentine belts.

Mar 07, 2009 | 2004 Nissan Maxima

2 Answers

2002 maxima

No, it has a timing chain that will not require maintenance. Maybe he meant the external drive belts. They should be changed on schedule.

Jun 24, 2008 | 2002 Nissan Maxima

Not finding what you are looking for?
1999 Nissan Maxima Logo

160 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts


Level 3 Expert

81400 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22359 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides