Question about 2002 Ford Explorer
Replace alternator 2002 ford explorer, how hard to do myself ? Am slightly skilled.
If you remove the old one and take care in remembering which bolt goes where , Its fairly simple to do,, I just hope you have small hands as its in there pretty tight ,
Posted on Aug 03, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
remove hub ,take retaining circlip out and knock it out with a big big hammer supporting it on an old wheel rim and a tree trunk.this job is easy to do but unless you have the right tools entrust it to a garage who will have a nice press .
Posted on Feb 02, 2009
Safety Belt pre-tensioner Status (Driver pre-tensioner Circuit Fault).
On the seat belt buckle there is a pre-tensioner that when vehicle is involved in an accident it will deploy and pull the belt tighter.
If the vehicle has never been involved in an accident it could be what we call terminal fretting which is just a build up on the terminals which cause a open circuit. Usually just unplugging and reconnecting the connector a couple of times will fix this.
If this doesn't correct it I would recommend having your local dealer look at it.
Posted on Apr 01, 2009
I see two or three,the schematic shows two in series coming of the wire from the battery junction box to the back of the alternator and a third coming off the second wire,it's a tough call because schematics even factory schematics aren't always right but either way follow the wiring from the back of the alternator,and you should find them.
Posted on May 15, 2009
you must remove brakes, then remove axle nut, then remove upper control arm and finally tie rod stabilizer, remove axle from car then bearing can be accessed. this is a difficult job that requires special tools so be careful
Posted on Aug 15, 2009
Tips for a great answer:
Feb 29, 2016 | 2002 Ford Explorer
Dec 15, 2015 | 2002 Ford Explorer
Jan 14, 2013 | 2002 Ford Explorer Sport Trac
Feb 04, 2012 | 2002 Ford Explorer
Dec 22, 2009 | 2002 Ford Explorer
Dec 18, 2009 | 2002 Ford Explorer Sport Trac
Aug 28, 2009 | 2002 Ford Explorer
Jul 18, 2009 | 2002 Ford Explorer
May 15, 2009 | 2002 Ford E-Series
Feb 21, 2009 | 2002 Ford Explorer
351 people viewed this question
Usually answered in minutes!