Question about 1994 Jeep Cherokee Country

1 Answer

The jeep has power and starter been replace but the jeep still wont start?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 66 Answers

You need three things for an internal combustion engine to work, air, fuel and fire.
Is it getting all the above? Is there fire getting to the plugs? Is there fuel getting to the cylinders? Is it getting air?
If the answer is yes to all the above, then it should turn over and fire.
Possible causes for it not starting... Not getting air - Check air filter, or just take it out. Not getting fuel - Check your fuel pump, check your fuel filter, check your gas tank. Not getting spark- Check wires, check plugs, replace as necessary.
If all the above is GO, then I'd have someone check the timing.

Posted on Aug 02, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999 jeep cherokee sport cranks wont crank


Most likely is intermittent in starter solenoid relay

Next most likely is key switch start connection intermittent. a tester will have to be used to find where the power is being lost from the start terminal of ignition switch to starter solenoid pilot connection to the main starter output power from solenoid to starter main contactor.

Jun 09, 2013 | 1999 Jeep Cherokee

1 Answer

Put key in.. gauges work.. have power.. wont start.. its not clicking.. i think maybe a relay for the starter, not the starter it's self.. 1996 Jeep Grand Cherokee Laredo I-6.. your oppion?


I THINK YOUR RIGHT! CHECK FUSES AND RELAYS FOR POWER ALSO IF THE POWER SUPPLY TO STARTER IS NOT A GOOD CONNECTION THEN IT WILL FAIL TO EVEN TRY TO START. GOOD LUCK!

Dec 11, 2010 | 1996 Jeep Grand Cherokee

1 Answer

Wont start no power from ign to starter can cross starter with screw driver and will start put test light on in wire to starter no power checked fuses battery is good


have you checked up on the steering column, those switches go bad and are easily replaced. I've had to do a few of those lately that had the same problem.

Jul 24, 2010 | 1996 Jeep Grand Cherokee

2 Answers

I have replaced the battery and my jeep still will not start. Do I need to do something else


When you say it doesnt start what do you mean? does the engine crank over but wont start, or is it that when you turn the key nothing happens,i will assume it does nothing when the key is turned just due to the fact you replaced the battery,the next step is to check for power at the starter,have someone turn the key to start and hold it there while you check for power at the small connection at the starter, the starter has two connections, one has power at all times and the other a small connection gets power when the key is in the crank (start) position, if theres power at the starter then you have a bad starter, if theres no power then you may have a bad key chip or a bad neutral safty swith, now if the truck is spinning over but not starting then the first common thing i would check is for fuel preasure at the injector rail, good luck hope this helps.

May 09, 2010 | 2004 Jeep Grand Cherokee

1 Answer

Wont turn over


The starter is most likely the problem,tap on the starter lightly with a hammer while trying to start the engine,dont get run over doing this it will take two people,if the engine starts,the starter needs replacing.

Apr 25, 2010 | 1998 Jeep Wrangler

1 Answer

Wont start. Starter does not turn.


check power at starter termial if has power replace starter if not check alarm

Oct 15, 2009 | 2005 Jeep Wrangler

2 Answers

2005 Jeep Grand Cherokee Limited, 5.7L V8, starter clicks, jeep wont turn over, check engine light on but computer sends back no codes found? HELP!!


Every morning at lunch time and evening my jeep won't start. It doesn't grind but the electrical goes crazy. After a couple of trys it finally starts. Help

Jul 26, 2009 | Jeep Grand Cherokee Cars & Trucks

1 Answer

Wont start when the key is turned on 96 Jeep Cherokee Sport


Check the neutral position switch. this may need to be replaced or adjusted.

Mar 18, 2009 | 1996 Jeep Cherokee Country

1 Answer

1996 Jeep Cherokee wont start


Have you tried to jump power directly on the starter? make the BIG power cable touch the small one on the starter with it still in the engine.(power touching the starter solenoid) use a LONG screwdriver to make them touch. you will not get shocked just make sure you only touch those 2. it will spark a bit but just hold it on there. if your starter clicks and does nothing then you have a bad starter. if it works then you have other problems.If it starts to smoke stop and make sure your engine is not frozen by turning the crankshaft with a large ratchet.

make sure voltage flows WHEN cranking also. check voltage at the starter while cranking. make sure it maintains 12 volts. or very close to it. nothing below 10.8 volts. check for corrosion on battey cables if voltage drops below that. that shows you have a curremt problem. also check grounds. or make new ones you know are good.

Good luck

Michael
ASE certified
plz rate

Feb 09, 2009 | 1996 Jeep Grand Cherokee

2 Answers

Jeep won't start has power to lights but won't turn over


The starter is a good possibility. Try tapping the starter with a small hammer while trying to start it. Sometimes the brushes in the starter get dirty and tapping it will jar them loose. If the jeep starts then replace the starter. If the jeep does not start, take a test light and see if you are getting voltage to the big nut on the starter while trying to start it. If it's getting 12 volts and the jeep does not start, then replace the starter.

Nov 24, 2008 | 1998 Jeep Cherokee

Not finding what you are looking for?
1994 Jeep Cherokee Country Logo

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...