Question about 2004 Mazda 6
I need to replace the serpentine belt on a mazda 6 2004
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Here are links to the diagram...
If your engine is the 2.3L 4 cyl... http://www.gates.com/common/part_locator/view_diagram.cfm?id=S7042
If your engine is the 3.0L V6... http://www.gates.com/common/part_locator/view_diagram.cfm?id=S6036
Posted on Sep 01, 2009
just push down on the top pulley (the smaller one) as for getting the new belt back on make sure your belt came with the "tool-kit" which helps you get it back on...
ILL NEVER BUY A MAZDA AGAIN!!! man what a problem getting PARTS!
Posted on Nov 20, 2008
try www.autozone.com to see if they have your car listed for diagrams pictures and step by step instructions if your car is not listed then try your local library they have all the car manuals and even copy them for you
Posted on Mar 21, 2009
YOUR LOCAL MAZDA DEALER WILL GIVE YOU ONE OR DOWNLOAD ONE FROM MAZDA.RICHARDM69
Posted on Jun 02, 2009
SOURCE: replacing serpentine belt
Click on the following direct Link. It has the Serpentine Belt Diagram that you will need depending on your engine size (2.0L or 3.0L) and your options (AC/No AC ect.).
Standard Rules to Removal the Serpentine Belt with a Tensioner:
1. Find the Tensioner(s). (See Diagrams on Link)
2. Using a Serpentine Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT (on the Pulley or Arm Base) OR the OPENING (3/8ths or 1/2 inch square opening) rotating the Tensioner Pulley/Arm - moving it away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
3. Remove the loosened belt off one of the other more easily accessed Pulleys.
4. DO NOT quickly release the Tensioner, but gently allow the Tensioner to rest in its closed position.
Standard Rules for Installing the Serpentine Belt with Tensioners:
a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.
b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.Com!
Posted on Mar 25, 2010
Tips for a great answer:
Dec 19, 2015 | Cars & Trucks
Oct 23, 2014 | 2004 Mazda Tribute
Aug 28, 2011 | 2004 Mazda 6
Feb 28, 2010 | 2004 Mazda 6
Sep 08, 2009 | 2004 Mazda 6
Sep 08, 2009 | 2004 Mazda 6
Aug 31, 2009 | 2005 Mazda 6
Mar 18, 2009 | 2004 Mazda 6
Oct 28, 2008 | 2004 Mazda 3
Jul 03, 2017 | 2004 Mazda 6
828 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: