Question about 1998 Lincoln Town Car

1 Answer

Power window will not work going up how can i pull the window up until i can get it fixed 1998 lincoln town car

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,301 Answers

Remove the door panel,, locate the 2 wires that go to the window motor use a 12 volt power supply with at least 10 amps,, reverse the wires to either go up or down, your problem if it is a switch not the motor, can be solved doing this, ( if you don't have a 12 volt power supply, use jumper cables and your battery ,, use insulated clips to touch the wire connection for the motor so you don't short it out , replace the switch

Posted on Aug 02, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Theb two front windows dont open . but the back does work.the front have power .does it have two relays


Lincoln Town Car - YouTube

? 3:07
www.youtube.com/watch?v=t5fjl51xwJc
Apr 24, 2011 - Uploaded by 1A Auto Parts http://www.1aauto.com/1A/WindowSwitches/Lincoln/TownCar/ ...Driver Power Window Switch Lincoln Town ...

Town Car window motor problem - Car Forums at Edmunds.com

forums.edmunds.com > Lincoln > Lincoln Town Car
Jul 24, 2009 - 20 posts - ‎9 authors Learn more about Lincoln Town Car at the Edmunds.com Car Forums! Read real ... Your problem might just be the actual power window motor itself. ... If your 88 frontdoor is anything like the 99 door I had,look on the bottom.

Oct 14, 2015 | 1999 Lincoln Town Car

1 Answer

Where is the fuse for power windows located on 1998 Lincoln town car


out side in the engine capartmemt. usallyby the batt capartment .has ablack box with cover that says fues and relays check owners manual and it wiii tell you wich ones are for ft windows and rear windows .if fuses are good re place relays same box.

Apr 28, 2011 | 1998 Lincoln Town Car

1 Answer

How to change window relay for lincoln town car 1998


its in the fuse box and should be clearly labled along with all the fuses relays are large and usualy black or grey they pull out just like a fuse to test it with a 2nd person press the window switch with the engine off you should hear it click if it clicks its working

Feb 11, 2011 | 1998 Lincoln Town Car

1 Answer

1998 Lincoln Town car. Making noise like turn


the cooling fan has been strait wired what can i grounded it to besides the fuse box?

Sep 20, 2009 | 1998 Lincoln Town Car

1 Answer

MY 1998 lincoln town car horn is not working how too fix the car


Did you check to see if you had power to the horn? There is also a horn relay in your fuse control center under the hood. If you have your owners manual look in it and it will show you where the location is at.

Jul 30, 2009 | 1998 Lincoln Town Car

1 Answer

Inoperable 1998 lincoln town car passenger side view mirror


your window motor is probably shot so you may need to get a new one or go to a junkyard and get one out of a junk car

May 18, 2009 | 1998 Lincoln Town Car

1 Answer

1990 Lincoln Town Car - windows up/down


opperate and listen to see if you hear any crunching noise. if you do the regulator(s) may (are going to) need replacement.

Apr 27, 2009 | 1990 Lincoln Town Car

1 Answer

1998 Lincoln Town Car


If your main brake lights are not working and the third light in the back window is working
it is the turn signal switch on the column cost about 150 to have replaced

Jul 17, 2008 | 1998 Lincoln Town Car

Not finding what you are looking for?

Open Questions:

0 Answers

98 Lincoln TC,Cold starts fine ,runs good until warm, then shuts off. No codes,Cranks ok, have spark, PATS ok. No fuel pressure, cant hear fuel pump prime,New Fuel relay. jumped fuel pump - works. I do not hear fuel pump prime up, do not have fuel gauge, but pressing on valve in fuel rail- no pressurized fuel. Fuel regulator seems ok, not leaking / vacuum line dry as a bone. If I let it set for 15 min , it will start up again, but for a few minutes then dies out. If I let it set overnight it starts up perfectly and runs until operating temp is reached then stalls/stumbles, and shuts down. Vacuum is good while cranking, even with no start, Checked Inertia switch in trunk, it is not tripped. I have seen Ford TSB summaries' that mention issues like this , but I am not able to see to description. A point to add, the MAF sensor was cleaned, then I decided to replace it and did not make a difference. I do not have any stored codes, and the PATS is working fine, typical 2 second flash from and once key is inserted a 3 second steady light, then disappears. I have seen the TSB mentioning C103 Connector, it looks fine, I swapped out fuel pump relay with ac relay, still no difference.mention of wires around battery, do not know where to start. in dash service engine light and odometer is normal, seen other posts the say they only have lines, but mine is ok. the start of all of this , I washed engine with regular garden hose, ( not using pressure washer).also in the mean time, rear window defroster stopped working as well, can not say for same reason, but a mention.My problem started after washing engine. this is one of four Panther platform vehicles I owned with exact 4.6l w code engine, which I rinced down before. The only sensor I can think of is Oil pressure , or a corroded wire

Feb 27, 2017 | 1998 Lincoln Town Car

See all 1998 Lincoln Town Car Questions

1998 Lincoln Town Car Logo

Related Topics:

162 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

fordexpert

Level 3 Expert

5522 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...