Question about 2007 Dodge Ram 1500 Quad Cab Sport

Open Question

My 2007 Dodge Ram Truck check gages light comes on and stays on. What is most likely the cause and the fix?

Posted by on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 151 Answers

SOURCE: check engine light on code

This trouble code is Evap Purge System Performance fault. 1) Check for a loose or missing fuel cap. 2) Check for a damaged or missing fuel cap seal. Recheck for other trouble codes. This fault wont cause the stumblering problem. It turns on the MIL lamp to say there leak in the EVAP system.

Posted on May 10, 2009

  • 2 Answers

SOURCE: 99 dodge ram interior lights wont come on

I have the same problem,but the IOD fuse is not blown and all of the other fuse is good. Still trying to find the problem.

Posted on Dec 01, 2009

  • 4669 Answers

SOURCE: abs brake lights come on and stay on

Replace the speed sensor in the rear end.

Posted on Apr 05, 2009

  • 1 Answer

SOURCE: Perform Service light reset

1.Turn key on/eng off
2.Press brake pedal slowly 2 times
3.Press gas pedal 2 times within 10secs.
4.Turn key off

Posted on Jul 23, 2009

  • 2 Answers

SOURCE: 99 dodge ram interior lights wont come on

I had the same problem and could not understand why I THOUGHT I checked all the fuses, but there is a fuse on the drivers side which is covered by a black thing (no idea why). It is listed as IOD or something. If you lift the black thing up and remove the fuse you will notice it is blown. Replace this and all will be well again.

Posted on Oct 11, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2009 dodge truck lights staying on on dash, brake,abs ,esp,anti slip light are all on. How to clear?

Have someone scan the body computer for trouble codes.
Once the problem is fixed and the codes are erased, the lights should stay off.

Feb 25, 2013 | 2009 Dodge Ram Pickup 1500

1 Answer

Engine light & exhaust red light stays on. Unable to cancel lights.

If youve fixed the issue that was causing the lights to come on. You can cancel them by re moving the negative battery cable first. Then get inside the vehicle and press brake for 30 sec. This will drain remaining juice from computer. Then hook negative cable back up and start. The lights should be off after this procedure.

Aug 25, 2011 | 2007 Dodge Ram Truck

1 Answer

2007 Dodge Ram 1500 (Quad) 5.7 Hemi 4 wd The truck will not shift into gear. There is no noise problem. Transmission fluid is possibly a little high. The check engine light is on.

well try to get a ecm reader on it and it will prob tell you what is wrong with it cause everything now on these newer models is controled by the ecm or pcm

Mar 15, 2011 | 2007 Dodge Ram Truck

1 Answer

2007 dodge ram gas hemi, intermittent, randomly, the engine will not crank, battery good, starter works great when it does crank. when this happens the check engine light comes on, disconnecting the...

I believe that there is an electronic relay between the ignition switch and the solenoid on the starter that is causing your intermittent starting problem.

Jan 20, 2011 | 2007 Dodge Ram Truck

1 Answer

How to do a oil reset on 2007 dodge ram 1500 hemi. everytime its time to change oil the check engine light stays on for 200 miles or so then goes off and does not come back on until next oil change...

the computer has a built in oil service light that will glow every 5k to remind you its time to have an oil service whatever oil you use.on this type of vehecle i have always reckoned using semi synthetic oil because of the cost.and changing it every 5k in heavy use.

Mar 01, 2010 | 2007 Dodge Ram Truck

2 Answers

Check engine light

Try this:
* Turn key ON (engine OFF, don't start run)
* Press brake pedal slowly 2 times
* Press gas pedal 2 times within 10 seconds
* Turn key off

Hope helps (remember rated this) Good luck.

Jan 12, 2010 | 2007 Dodge Ram 1500 Quad Cab Sport

1 Answer

Check engine light stays on - 2006 Dodge Ram 2500 Cummins

Go to Autozone, they will check your engine codes for free.

Sep 23, 2009 | 2006 Dodge Ram 3500 Truck

1 Answer

Brake light stay on and abs light comes on? what is the remedy.

I would start out by checking the brake light switch connected to the brake pedal. Usually when the brake lights wont come off even if you play with the brake pedal, it means the switch that tells the lights to turn on or off is defectie. However, Since 2007 on dodge rams, there is a new system implemented for all the lights, flashers and such which uses only one wire for all the lights. The light switches themselves now only change resistances to tell the computer at the other end of that wire which lights you want it to turn on. So if the brake switch is working fine, unfortunetly i can already say it's gonna cost a bundle cause it will invole changing the wiring harness completely and/or one or more of the many onboard computers in your pickup truck.

Jul 07, 2009 | 2007 Dodge Ram Truck

1 Answer

Check gages lite comes on

Check gauges light only comes on when one of the gauges is out of perameter. Check to see which of the gauges is not working properly and then check that system.

May 26, 2009 | 2000 Dodge Ram 1500 Truck

Not finding what you are looking for?
2007 Dodge Ram 1500 Quad Cab Sport Logo

Related Topics:

1,066 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

81423 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22359 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides