Question about 2004 Dodge Ram 2500
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
I would still be suspect of the ABS module. Had the same thing happen on an 01 Tahoe.
Search the web for an ABS repair facility located in Russia, IA. They repair the module for $150.00 and give a 5 year warranty, which you can't get from the factory.
And, their website has troubleshooting guides to help you determine if for certain the module is bad or has a probelm.
You can remove the module and continue to drive the vehicle. Their turn around is as they state, and once I had them make the repiars, my Tahoe has been up and running great!
Posted on Jan 25, 2009
Remove negative battery cable.
Remove the electrical plug and wireing. Mark them.
Loosen the alternator pivot bolt.
Remove the bolt that attaches the alternator to the adjustment arm.
Rotate the alternator to loosen the drive belt and disengage the belt from the pulley. Be careful that any spacers that are used in mounting are kept with their original bolts. This will make correct reinstallation much easier.
While supporting the alternator remove the pivot bolt.
Remove the alternator from the vehicle.
Do the reverse procedure to install new alternator.
Posted on Feb 03, 2009
Alot of times these switches get water from the rain coming in intoo them causing the contacts to short or not make contact at all, unfortunately they are not servicable but you may want to try spraying some electrical cleaner into the switch working the button at the same time this may help
Posted on Jul 02, 2009
I had the same problem and it turned out to be one of the front speed sensors and the rear speed sensor as well. If you get a chance to look at all the speed sensors make sure the wires on the front aren't burnt from hot brakes. I have an 01 3500 4X4 and it was a pain to change the front sensor but the rear sensor took about 5-10 minutes, it's located in the middle of of the rear axle right on top. I bought both of mine on Ebay and cut the price in half.
Posted on Aug 22, 2009
Tips for a great answer:
Apr 26, 2014 | 1999 Dodge Ram 2500 4WD
May 18, 2011 | 2007 Dodge Ram Truck
Jan 29, 2011 | 2004 Dodge Ram 2500
Oct 16, 2009 | 1996 Dodge Ram 1500 Club Cab
Jul 08, 2009 | 2006 Dodge Ram 2500
Jun 04, 2009 | 1999 Dodge Ram 2500 4WD
305 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: