Question about 1996 Buick LeSabre

1 Answer

WHERE TO PUT FREON IN 4 CYLINDER MOTOR - 1996 Buick LeSabre

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,340 Answers

It should go into an aluminum tube with 2 black caps,1 toward each end.The side you put it in is the side which is closer to the belt system,that's where the evaporator and compressor are.Do it with the car running and the a/c on.Fill up at about one quarter can intervals so that you don't overpressurize the system.When it gets cold enough inside,stop.If it only lasts a couple of days or a week,there is a leak somewheres and will need shop testing and repair to determine where it is leaking.Good luck!R-134a too right?

Posted on Aug 02, 2010

Testimonial: "thanks so much you nailed it.Got it working now cold as my ex-wife "

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Ac recharge


Connect freon cylinder with compressor suction side And slowly refill refrigerant.

Aug 07, 2016 | 2007 Honda Civic 1.8

1 Answer

How do i find blockage in air conditioner hoses after freon added and gauges dont register that there is freon


Did you try to add freon because is was no longer blowing cold air? Who added the freon local repair shop or A/C specialist?

Oct 06, 2014 | 2004 Chevrolet Malibu

1 Answer

What is the Freon capacity on my 2002 Saturn SC1. It has a 1.9 liters engine, 4 cylinders.


THE ACTUAL FREON CAPACITY IS UNIMPORTANT. WHAT IS IMPORTANT IS THE PRESSURES WHEN THE SYSTEM IS RUNNING. THE LOW SIDE SHOULD BE 25-35 PSI, THE HIGH SIDE APPROX 250 PSI. THE HIGHER THE AMBIENT TEMP, THE HIGHER THE HI SIDE PRESURE. USE PROPER TOOLS TO CORRECTLY EVACUATE AND CHARGE THE SYSTEM. AVOID OVERCHARGING AS TOO MUCH FREON IS WORSE THAN NOT ENOUGH.

Apr 01, 2013 | Cars & Trucks

2 Answers

Where is the number 4 coil in a 2003 Ford Escape? Is it near the window or more towards the front of the car? Thank you.


Hello ctyloma,

Below is a diagram of the cylinder locations.

netvan_247.png

I hope this helps.

Regards,

Jerry

Sep 24, 2011 | 2003 Ford Escape

3 Answers

Need to put spark plug back onto distribator cab but dont know which goes where


put the cylinder one on TDC
pull the cap off and look at witch one the rotor is on..
then going clock wise here are the firing orders depending on which engine you have...
4 cylinder 1-3-4-2/ 6 cylinder 1-6-5-4-3-2/
8 cylinder 1-8-4-3-6-5-7-2

Aug 24, 2009 | 1999 Dodge Dakota

1 Answer

The AC in my car doesn't work. Everything has been looked at and it system has been charged. Everything works out but no cold air. The you can hear everything come on just like it would with the heat. Any...


When you put on the A/C find out if the compressor is engaging. There are pressure switches for both too little freon or too much freon. If the compressor is not engaging there is a switch on the low pressure side close to the oblong cylinder where you put in the freon. Unplug the switch and put a jumper wire on the wire harness plug. The compressor should engage. If it does you either have too little freon or the low pressure switch is bad.

Aug 10, 2009 | 2004 Mercury Sable

2 Answers

Where do you put in freon 02 nissan frontier 4 cylinder


In the engine compartment, look for two lines coning from the front of the vehicle. They are made of aluminum and one of them is larger than the other. Look for a cap that is blue in color, and has an L on it. While the car is running with the a/c on hook up the freon bottle to the service port. If you get the freon with the gauge on it, this will eliminate the possibility of overcharging. good luck

Apr 25, 2009 | 2002 Nissan Frontier Crew Cab

1 Answer

A/C problem. no circulation


Find clean, preferably white container. Try to empty out the oil from the old compressor through the holes on top. Give the clutch a few spins while dumping. How much oil comes out and is the oil clean and transparent or black/grey with metallic particles?. If it comes out dirty you may have a bad restriction in the system. If clean the compresser is suppose to stop turning electrically as it reaches low pressure to prevent the evaporator core from freezing up.

Apr 05, 2009 | 1991 Toyota Camry

1 Answer

Missfire on #4 cylinder for 1998 kia sportage


had the same problem....broken spark plug. try replacing your plugs.

Nov 29, 2008 | 1998 Kia Sportage

1 Answer

99 jeep wrangler


get a 6 cylinder motor drop in this is best gas saver for most vehicles 4 cylinders dont have the ability to push all the weight of a vehicle but runs smoothly
6 cylinders are as i put in words are evenly balanced for everyday use and not gas guzzler either

May 16, 2008 | 1999 Jeep Wrangler

Not finding what you are looking for?
1996 Buick LeSabre Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...