Question about Toyota Camry

2 Answers

How do I adjust drivers' side headlight on a 1986 Toyota Camry?

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,340 Answers

I am not exactly familiar with that model but usually if you stand in front of the light and look around it's edges,there should be 3 screws for adjusting it.You may have to open the hood.To lower the light,loosen the top one tighten the other ones or whatever you require to adjust.Always loosen the screws before you tighten the others so it doesn't break.There is a possibility of the screws being inside,open the hood and set.I have never seen that but anything is possible.Good luck!

Posted on Aug 02, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,301 Answers

Look straight down behind the light, there you will see the adjustment screw for aligning

Posted on Aug 02, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to aim headlights on 2010 toyota camray


Pop the hood and stand in front of the headlight. Look down at the top of the headlight and then move towards the back of the assembly. Towards the center of the car (if you're looking at your driver side headlight, this will be "left" and vice versa for the passenger headlight) you will see a toothed wheel with a bolt thru it mounted on the back of the headlight assembly. It is surround by a rim with a slot at approximately 10 o'clock (driver's side headlight). Use a long philips head screwdriver and turn this wheel by inserting the tip of the screwdriver into this slot. I believe clockwise turns aims the beam lower. A few turns and you should be able to see which way is which.

Be sure to do your adjustments on a level surface with your lights approximately 25' away from a preferably flat wall.

Oct 05, 2010 | 2010 Toyota Camry

1 Answer

92 Toyota Camry Passenger side headlight only works with HigBeam


You need to get a volt meter at the headlamp plug (Wiring harness) to see if you got a ground, power from the low beam wire, and then power from the hight beam wire. It's the best place to start.

May 13, 2010 | 1992 Toyota Camry V6

1 Answer

How do I adjust the headlights on my 1998 camry


When you open the hood on the front side, there shoul be little "levels" with a bolt or Screw setup. Are they level? If not, tighten or loosen until the indicator levels say they are. You can adjust the angle of shine this way. Try to stick with the Levels though. They help keep the light out of the driver's eyes in front of you.

Apr 02, 2010 | 1998 Toyota Camry

1 Answer

Camry head light adj


Adjustment are located on the sides of the headlight assembly. One adjusts up and down (side) and one adjusts side to side (back) park about 20 feet away from a wall and adjust to center Your beams should be about 6"-8" lower than the headlights and about 6" inside the diameter of the lights

Mar 22, 2010 | 1995 Toyota Camry

1 Answer

How do I replace a driver's side headlight bulb on?


if its in the way then you have to remove them to get access

Jul 20, 2009 | 1990 Toyota Camry

1 Answer

1994 toyota camry taillights are not on, but break lights are on,


I would remove the Lamp Failure Senor module form the driver side of the trunk area, it is on the side brace, behind the interior carpet on the driver side. Disassemble it, and look for burnt components. If the Sensor is OK; look for a broken wire on the driver side arm that holds the trunk open. It is red or green, or red/green tracer. Broken wires in this area are common to that model.

Apr 22, 2009 | 1994 Toyota Camry

1 Answer

I have a 1986 toyota camry and want to fix Ci system


i think you might have a vacum leak.other wise when you adjust that screw.that should work..

Mar 10, 2009 | 1986 Toyota Camry

1 Answer

I need a drivers side tail light lens for 1986 Toyota Camry


Hi there if you go to your local junk yard they will be able to get one for you and theuy are fairly cheep
regards mike

Mar 08, 2009 | 1986 Toyota Camry

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...