Question about 2000 Mercedes-Benz S-Class

Open Question

How to change brake pads for 1997 s320 - 2000 Mercedes-Benz S-Class

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
Richie_asg1
  • 1036 Answers

SOURCE: Turning off brake pad warning light after changing pads on S320 merc.

Hi,
If the light came on before you changed pads, you will need to replace the sensor.
The sensor consists of only a wire link embedded in a hard plastic. This is worn through when the pads are nearly worn out.

To check which sensor it is, it's easier to unplug the sensor, and check with a continuity checker. If there is no continuity, you need to replace it.

Thanks for using Fixya! If this solves the problem, please rate as such. Thank you.

Posted on Jul 14, 2008

Ad
michigan man
  • 3533 Answers

SOURCE: change rear brake pads on mazda 323f 2l v6 1997

try autozone.com to see if they have your car listed for diagrams pictures and step by step instructions if your car is not listed then try your local library they have all the car manuals and even copy them for you

Posted on Mar 21, 2009

  • 1 Answer

SOURCE: Brake pads for 2001 S320 MB vs S430 MB

Yes you can. Make sure you not gonna buy a ceramic pads. They are so loud. My own experiance.

Posted on Mar 23, 2009

juststinks
  • 98 Answers

SOURCE: changing front brake pads, brake fluid starting leaking after removing bolts

there should be no brake fluid comming from the caliaber at all.look on the in side of the caliaber on the top and bottom you should see 2 long bolts. they may be hexagon,allen key, or a bolt. there are the 2 you are looking for. DO NOT SET PARKING BRAKE. when you take the bolts out you will see 2 small shafts where the bolts came out of. they must be push back in flat with the caliaber ( you may or may not have them). you have to open the lid where you add brake fluid. now take off the front pad leave the pad on in the hole. take your C-CLAMP and place it over the caliaber and the brake pab and compress the piston until it flat with the caliaber. ( you will repeat this on the other side ) at this point take your dic brakequit spred a coating on the parts thats need. ( referr to the old parts ) dont get anything on the front of the pad. let the pad sit for about 5min. ( smoke a cigarette. if you dont smoke i will teach that in part 2 ) now that the dic brake is tacky place the one that fixs in the hole on first now the outter one. slide it back on you may have to tap it in place after its seated replace the bolts. now your going to see that it has a gap between the brake pad and the rotor.replace the lid on where you add brake fuild. put the tier back on the car and pump your brakes. it should get hard. ( not you the brake pedal ) now repeat these steps for the other side.

you may have two bleed your brakes because you let fuild out that means you let air in. PLEASE let me know if this helped you.

Posted on May 10, 2009

  • 583 Answers

SOURCE: back wheel tight after changing brake pads,

adjustment needs to be backed of to the maximum,and if still draging sand the shoes

Posted on Oct 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Does the fuel injector of S320 fits E320 year 1997


Yes. As long as both cars are 1997's almost everything about the engines is the same, but definitely the fuel injectors.

Dec 16, 2014 | Mercedes-Benz E320 Cars & Trucks

1 Answer

What would cause my 1998 Mercedes S320 not to start.


Try replacing the crankshaft sensor. Same thing was happening to my E320. Also, it would cut-off while driving it.

Nov 25, 2014 | 1998 Mercedes-Benz S-Class

1 Answer

I kept getting a brake light signal,and had rough idleing when I started the car.Why wont my Mercedes 1997 S320 start ?


brake light is prob a bad bulb somewhere , totally seperate from the running problem , get your fuel pressure checked on the fuel rail not sure but should be about 40 50 lbs if not then your fuel pump is prob bad and it is in the tank

Nov 25, 2014 | 1997 Mercedes-Benz Mercedes Benz S Class...

1 Answer

WHERE IS THE BRAKE SENSOR LOCATED ON THAT CAR M.B.S320 1998


Possible bad master cylinder or air trapped in the system. Take it to a brake shop and have a power bleeding done on the system. Other possible causes could be low brake pads that have little sensors built into them that have to be replaced at same time as the pads.

Apr 13, 2014 | 1999 Mercedes-Benz S-Class

1 Answer

Back wheel tight after changing brake pads,


adjustment needs to be backed of to the maximum,and if still draging sand the shoes

Oct 25, 2009 | 2007 Pontiac G8 Sedan

2 Answers

Changing front brake pads, brake fluid starting leaking after removing bolts


If they are fixed calipers (which they probably are) then yes. If they are floating calipers then you have to remove the two bolts on the guide pins. From your description it sounds like they are fixed calipers, in which case you remove the clip on the pin and remove the pin and pads. Compress the pistons and replace the pads and pin. Be sure to tighten the bolt you removed.

May 10, 2009 | 1995 Mercedes-Benz S-Class

1 Answer

Brake pads for 2001 S320 MB vs S430 MB


Yes you can. Make sure you not gonna buy a ceramic pads. They are so loud. My own experiance.

Mar 18, 2009 | 2001 Mercedes-Benz S-Class

1 Answer

Turning off brake pad warning light after changing pads on S320 merc.


Hi,
If the light came on before you changed pads, you will need to replace the sensor.
The sensor consists of only a wire link embedded in a hard plastic. This is worn through when the pads are nearly worn out.

To check which sensor it is, it's easier to unplug the sensor, and check with a continuity checker. If there is no continuity, you need to replace it.

Thanks for using Fixya! If this solves the problem, please rate as such. Thank you.

Jul 14, 2008 | 2005 Mercedes-Benz Mercedes Benz E320 Cdi

Not finding what you are looking for?
2000 Mercedes-Benz S-Class Logo

Related Topics:

197 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...