Question about 2001 Saturn SC

1 Answer

I need to remove the starter on my 2001 saturn 1.9 litter engine? i need to find a diagram on how to do it?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 977 Answers

Disconnect the battery lead from the starter plus any other wires,undo the bolts on the starter motor flange & the starter should pull straight out providing there is nothing in the way if there is it will have to be removed first.....hope this helps.....cheers

Posted on Aug 05, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 Saturn starter does not enpage


Make sure your battery is fully charged and check all battery cables . Make sure the connections are clean and tight.if the starter clicks the starter solenoid switch could be at fault. Could be a bad starter its self. If its internal your ring gear in the engine could have teeth missing causing the starter to just spin.
These are just ideas.

Apr 07, 2013 | 2001 Saturn S-Series

1 Answer

How do you change the starter on a 2001 Saturn LW300 V6


the starter is located on the bottom side of the engine back towards the transmission. you'll need to crawl under the vehicle to see it.

a796e51f-faf5-4b23-80e9-9bca0e7f4961.png

Apr 02, 2013 | 2001 Saturn Lw 4dr Wagon

1 Answer

Need diagram of starter and how to remove it in a 2001 ford windstar


Here's a picture of the starter,there are 2 holes for the bolts,look and you can see where it's at on your vehicle.

Feb 10, 2013 | 2001 Ford Windstar

1 Answer

Cant get starter out in a 2001 jeep wagler 2.5 litter 4


Once you remove the starter mounting bolts and wires from the solenoid, the starter should pull right out and allow you to drop it down.
If you have a 3.7 it will take some more dis-assembly, but you have a 4 cylinder.

Apr 01, 2010 | 2001 Jeep Wrangler

1 Answer

I need wiring diagram for 2001 Saturn L300, I also fuel sys dgrm


Mine was doing same, but also revving up weird. I replaced the Crankshaft position sensor and it didnt work. Today I changed the Engine coolant temp sensor and it fixed my problem. Hope this helps!!

Dec 20, 2009 | 2001 Saturn L-Series

1 Answer

Spark Plug Wire Diagram


on the coil pack the one all the way to the left thats #4 then going from left to right #4-#1 #2 #3
4123 on the coil pack
then on the engine the spark plug closet to the top engine mount is #1 then 234 from left to right 1234 on the engine

Oct 15, 2009 | 2001 Saturn SL

3 Answers

2001 saturn sl car wont crank or start.


Sounds like you have a starter issue.

If the engine will not crank but you have power everywhere else I would start by testing the starter. You can remove the starter and take it to an autoparts store for inspection.

Sep 26, 2009 | 2001 Saturn S-Series

1 Answer

93 saturn twin cam starter removal


Top bolt is almost dirrectly above bottom bolt but,toward engine about 1 inch. slip 13mm.socket with enstention behind starter solenoid ,you have to fish for this bolt.Very hard if you do not have a rack,We always remove it from bottom.

Jun 14, 2009 | 1994 Saturn Sl

1 Answer

2001 Saturn, need a Serpentine belt diagram


get a floor jack and a small block of wood. place the floor jack under the oil pan. jack up the jack until you feel it on the oil pan. remove the engine mount. you will need a deep 15mm socket and a 6inch extension. the mount has 4 bolts. remove it. then jack the engine up with the floor jack until the power steering reservoir almost touches the cowl. now take a long 14mm wrench and place that on the bolt head on the belt tensioner. pull the wrench until the belt slacks up. remove the belt. Installation opposite of removal. Here is a belt diagram. I hope this helps!! If you have any problems or questions e-mail me at: Redlinetech07@yahoo.com
7744b58.gif

Feb 23, 2009 | 2001 Saturn SL

Not finding what you are looking for?
2001 Saturn SC Logo

Related Topics:

268 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8265 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...