Question about 2007 Toyota Tundra

Open Question

How to change a fuel filter on 2007 tundra and where is it located and how do you relieve the fuel pressure?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 375 Answers

SOURCE: car won't run after changing fuel filter

try to clean up your gas tank .it also can be a bad Oxygen sensor Fuel filter not so expansive around 30 40 bucks and might save you the hassle.... by it being the cause.

Posted on Jun 26, 2008

Ad
moparownr
  • 667 Answers

SOURCE: how to relieve the pressure on the fuel system in

look for the fuel rail, it should be the chrome pipe that runs between all of the injectors, there should be a plastic cap that you can unscrew and under it should be the pressure check port, it looks like a regular tire valve, with the ignition key OFF push the valve in and the fuel pressure will be released, fuel will also be released so be sure you have a rag handy, and don't look into the valve when you push it

Posted on Mar 20, 2009

GM Elec
  • 1000 Answers

SOURCE: 2000 Chevy Venture Fuel Pressure Regulator

Locate your fuel pump fuse in the under-hood electrical center. Start the van ( cold engine ) and remove the fuse. When the engine stalls, the fuel pressure will have been depleted in the rail. You will have a small amount of residual fuel in the line but no pressure. Place a rag under the regulator to catch the dripping fuel.

Posted on Mar 22, 2009

dsacco86
  • 1077 Answers

SOURCE: Oil change on a tundra

No special wrench needed for filter.
The oil filter is located in the front of the engine on the right side, down at the bottom.
It's easier to change the filter by taking of the front skid plate underneath. You'll need a 12mm socket to take it off.

If you try to get it from the top, you'll get oil all over the skid plate and have a big mess to clean up. Plus, you may damage the radiator by leaning on it.

Posted on Apr 16, 2009

  • 74 Answers

SOURCE: How do I relieve the line pressure before removing the fuel filte

open fuel cap then on fuel rail u will have a stym that looks like valve stm on a tire prees the center of that to relieve prssr then need a small tool to femove filter slip over the line push into filter seat will releas --do tank side 1st and on new filter u will have rubber caps save 1 -after u remove 1st line place cap over the filter inlet wiil stop gas frm going all over u then same on out let

Posted on Apr 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is oil filter located on 2011 Toyota tundra 5'7l


Mark, Complete instructions on how to oil and filter change link below.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
DIY Oil Change pics 5 7L

how to change the oil on 2009 toyota tundra

Oil Filter Change Toyota Tundra 2007 2013 2007 Toyota Tundra 4 0L V6

Feb 29, 2016 | Toyota Cars & Trucks

1 Answer

Where is fuel filter located


The fuel filter is under the car, under the left rear passenger area. Be aware that the fuel line is pressurized, you must relieve the pressure before you remove it. Wear eye protection, don't smoke and stay away from open flames.

Apr 01, 2014 | 1992 Buick Roadmaster

1 Answer

How can i change the fuel filter on a 2004 hyundia sonata?


NOTEThe fuel filter is located underneath the car, near the fuel tank.
  1. Before servicing the vehicle, refer to the Precautions section.
  2. Relieve the fuel system pressure.
  3. Remove or disconnect the following:

    Negative battery cableFuel supply and pressure linesFuel filter bracket, if equippedFuel filter

To install:


0996b43f80231741.jpgenlarge_icon.gifenlarge_tooltip.gif

Fig. Remove the fuel filter

  1. Install or connect the following:

    Fuel filter and torque the mounting bolts to 18-25 ft. lbs. (25-35 Nm)Fuel filter bracket, if equippedFuel supply and pressure linesNegative battery cable
  2. Start the engine, check leaks and repair if necessary.


NOTEThe fuel filter is located underneath the car, near the fuel tank.
  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2. Relieve the fuel system pressure.
  3. Remove or disconnect the following:

    Negative battery cableFuel supply and pressure linesFuel filter bracket, if equippedFuel filter

To install:

9347kg12.jpgenlarge_icon.gifenlarge_tooltip.gif

Fig. Remove the fuel filter


  1. Install or connect the following:

    Fuel filter and torque the mounting bolts to 18-25 ft. lbs. (25-35 Nm)Fuel filter bracket, if equippedFuel supply and pressure linesNegative battery cable
  2. Start the engine, check leaks and repair if necessary.


NOTEThe fuel filter is located underneath the car, near the fuel tank.
  1. Before servicing the vehicle, refer to the Precautions section.
  2. Relieve the fuel system pressure.
  3. Remove or disconnect the following:

    Negative battery cableFuel supply and pressure linesFuel filter bracket, if equippedFuel filter

To install:

9347kg12.jpgenlarge_icon.gifenlarge_tooltip.gif

Fig. Remove the fuel filter


  1. Install or connect the following:

    Fuel filter and torque the mounting bolts to 18-25 ft. lbs. (25-35 Nm)Fuel filter bracket, if equippedFuel supply and pressure linesNegative battery cable
  2. Start the engine, check leaks and repair if necessary.

icn_arrow.gifBack to Topbuyithere.gif

    Sorry, there are no parts available for the selected vehicle: 2004 Hyundai Sonata 2.7L MFI DOHC 6cyl.

Nov 24, 2012 | Hyundai Motor 2004 Sonata

1 Answer

Honda Civic Coupe. Year 2000 1.6. How can I depressurize the fuel system easily to change the fuel filter situated in the engine compartment.


Hi,

IMPORTANT: Do not skip the fuel system pressure release step. Injury and other damage can result!
Safety Step! Relieving Fuel System Pressure
· allow engine to cool
· relieve fuel system pressure
· put on your eye protection
Before you begin the job of replacing your fuel filter, you must relieve the pressure in your fuel system. A fuel injection system operates under very high pressure. If you don't release this pressure before you start unscrewing fuel lines the result can be explosive. Do this before you attempt to change the fuel filter.
To release the pressure in your fuel lines (and fuel filter) you'll need to locate the fuel pump fuse in the fuse box. If you don't have a fuel pump fuse, find the relay that operates the fuel pump. Once you've found the fuel pump fuse or relay, start the car. With the engine running, pull the fuse or relay out. If you pulled the right one, the engine will quickly die. Since it's using all of the pressurized fuel in the system, the fuel lines won't be pressurized when you crack the fittings on your fuel filter.
Now that you've relieved the fuel pressure you can remove the old fuel filter.
If you didn't do this yet, you must go to the previous step and do it. Very dangerous!

Best regards.

Oct 28, 2010 | 2000 Honda Civic

2 Answers

How to change fuel fillter


2002 Hyundai Sonata 2.4L MFI DOHC 4cyl the Fuel Filter is located uUnder vehicle, driver side, below seating area, driver side of fuel tank, mounted on frame in fuel line.


Hyundai Car 1999-05 - Removal & Installation

NOTE The fuel filter is located underneath the car, near the fuel tank.
  1. Before servicing the vehicle, refer to the Precautions section.
  2. Relieve the fuel system pressure.
  3. Remove or disconnect the following:
    Negative battery cable Fuel supply and pressure lines Fuel filter bracket, if equipped Fuel filter
To install:

d8227e1.jpg

Fig. Remove the fuel filter
  1. Install or connect the following:
    Fuel filter and torque the mounting bolts to 18-25 ft. lbs. (25-35 Nm) Fuel filter bracket, if equipped Fuel supply and pressure lines Negative battery cable
  2. Start the engine, check leaks and repair if necessary.
NOTE The fuel filter is located underneath the car, near the fuel tank.
  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2. Relieve the fuel system pressure.
  3. Remove or disconnect the following:
    Negative battery cable Fuel supply and pressure lines Fuel filter bracket, if equipped Fuel filter
To install:

  1. Install or connect the following:
    Fuel filter and torque the mounting bolts to 18-25 ft. lbs. (25-35 Nm) Fuel filter bracket, if equipped Fuel supply and pressure lines Negative battery cable
  2. Start the engine, check leaks and repair if necessary.
NOTE The fuel filter is located underneath the car, near the fuel tank.
  1. Before servicing the vehicle, refer to the Precautions section.
  2. Relieve the fuel system pressure.
  3. Remove or disconnect the following:
    Negative battery cable Fuel supply and pressure lines Fuel filter bracket, if equipped Fuel filter
To install:

  1. Install or connect the following:
    Fuel filter and torque the mounting bolts to 18-25 ft. lbs. (25-35 Nm) Fuel filter bracket, if equipped Fuel supply and pressure lines Negative battery cable
  2. Start the engine, check leaks and repair if necessary.

Hope this help to solve your problem.

Apr 24, 2010 | Hyundai Motor 2002 Sonata

1 Answer

How to change fuel filter ford free star 2007


Direct fit OE replacement fuel filter.

135d2d0.jpg



How to Replace a Fuel Filter (DIY Complexity: Moderate / Time: 1.4 hours)

Parts:
1. Fuel Filter

Tools:
1. 3/8 in. Drive Ratchet
2. Hose Pincher
3. Flare Nut Wrench
4. Flat Head Screwdriver
5. Socket Set

Steps:
Step 1 Open the hood and locate the fuel filter. If the fuel filter is not in the engine compartment, follow the fuel line from the tank until the fuel filter is located.
o Tip: Safety Tip:Always wear safety glasses when working on your vehicle. Wear other personal protective equipment (PPE) when necessary, for example latex gloves or safety shoes.

Step 2 If the fuel filter has a clear case, inspect the filter element for dirt.

Step 3 If the fuel filter case is not see-through, remove it from the fuel line. Drain the fuel from the filter into a container and inspect the condition of the fuel.
o Tip: Caution: Before removing fuel lines or fuel related parts, make sure that the fuel pressure is relieved from the vehicle fuel system. To relieve the pressure in fuel injected systems, remove the fuel pump fuse and run the engine.

Step 4 Install the new fuel filter making sure that the flow is in the correct direction. The arrow on the fuel filter is the direction of flow from the tank to the engine.

Step 5 Secure the lines back onto the fuel filter. If applicable, reinstall the fuel pump fuse.

Step 6 Start the engine and check for fuel leaks.

Step 7 Test drive the vehicle to check for a rough running engine, hesitation, or lack of power.


HOpe this helped.

Apr 10, 2010 | 2007 Ford Freestar Limited Minivan

1 Answer

How to change fuel filter on 2000 chevy malibu


the fuel filter is located just in front of fuel tank. relieve fuel pressure, you can do this by removing fuel pump fuse and running engine until it quits, or you can relieve pressure by shraider valve in engine compartment. squeeze the white plastic disconnect tabs together and pull the inlet line away from filter, then detach the outlet line from the filter, then unbolt the filter mounting bracket to remove fuel filter.

Jan 17, 2010 | 2000 Chevrolet Malibu

1 Answer

How to relieve fuel system pressure before changing fuel filter on 2007 mercury grand marquis


The best way is to let the car sit for an hour. Some fuel will leak, that is normal. Either way fuel will come out, just not as bad.

Sep 05, 2009 | 2007 Mercury Grand Marquis GS Sedan

3 Answers

Fuel filter replacement


the fuel filter is located on the drivers side under neath where the rear seat would be connected to the frame. relieve fuel system pressure,disconnect negative terminal from the battery,raise rear of vehicleand support it securily on jackstands,detach fuel lines from the filter,some have quick connect . squeeze plastic tabs to pull the connector apart,if it has threaded fiting unscrew the fuel line from the filter.

May 09, 2009 | Cadillac DeVille Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

235 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8582 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...