Question about Lincoln Continental

1 Answer

Changed harmonic balance on my 2000 lincoln 4.6 liter engine. while tring to get scew off I was turning the whole chaft. Will this throw my timing off? If so how can I get it back into timing?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 4,070 Answers

Hi! Please try this. Put it back on the timing mark and I suggest that you remove the belt then start removing the balancer. This will leave the timing intact. Hope this helps and have a good one!

Posted on Aug 02, 2010

  • 1 more comment 
  • barevis Aug 02, 2010

    As I was removing the balancer, The screw that holds the balancer on to shaft kept turning counter clockwise ( the screw was not loosening the whole shaft was turning). I finally got off the old balancer and installed new one. How Do I Find The Timing Mark or what ever I need to find? I have no timing tools at all. Please explain in laeman terms Please.

  • dj_relly999
    dj_relly999 Aug 02, 2010

    Hi! I provided a link to guide you what the timing mark is and they have to be aligned to get the timing right. Please click here http://arrc.epnet.com/autoapp/9307VLK/ch...

  • barevis Aug 03, 2010

    dj that would be easy enough if I knew where to look for this mark. Is it on the harmonic balance? Because from this picture illustration I have nothing that has those marks. A 2000 Lincoln Signature Edition 4.6. My balancer looks nothing like this.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is crank position sensor on a 1994 toyota 2.2liter 4cyl ?


Where is the crank position sensor on a 95 Toyota celica gt 2.2

search.aibing.cc/Where+is+the+crank+position+sensor+on+a+95+Toyota...
P1335, No Crankshaft Position Sensor Signal - Engine Running. ... 91 1991 ToyotaCelica GTS Engine Mount Right 2.2L 4 Cyl Genuine. ... 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 . ... Powered by a 2.2-liter engine, the Celica now had ST and GT trim models. ... in 1986 and a 2.0-liter ...

Where is crank position sensor on a 1994 toyota 2.2liter 4cyl ...

www.fixya.com/cars/t26080657-crank_position_sensor_1994_toyota
31 mins ago - It is not behind pully nor in dist all videos show - Toyota Cars & Trucks question. ... Change a crankshaft position sensor on a 2000 eclipse.

toyota camry crankshaft sensor - ABMforum.com

abmforum.com/toyota-camry-crankshaft-sensor.html
toyota camry crankshaft sensor 99 camry crankshaftcamshaft position codes i got a problem with my 97 ... The car 96 toyota camry 2.2 liter 4 cyl. ... 1994 toyota camry 2.2L 257k miles Symptoms Car overheats Top radiator hose hot bottom cold ...

Toyota Camry 5SFE Engine Timing Belt, Water Pump and ...

hubpages.com > Autos > Do It Yourself Auto Repair
Jul 10, 2014 - The Toyota 5SFE motor is a four-cylinder, 2.2 liter, timing-belt-driven, double ..... Remove the lower timing belt cover with the crankshaft position sensor. ..... I've never, ever replaced the harmonic balancer on a 4cyl 5SFE.

1995 Toyota Camry LE 4 cylinder - YouTube

? 2:27
https://www.youtube.com/watch?v=7TW6hlUiHWQ
Sep 6, 2011 - Uploaded by jacasan2000

Feb 03, 2016 | Toyota Cars & Trucks

1 Answer

Which is the correct timing mark on the DAYCO PB1001N harmonic balancer, for the 1967 Dodge D100's 225 CID 3.7L engine?


Bring #1 cylinder up on compression stroke, TDC this will tell you which mark to use.

Dec 13, 2015 | Dodge Cars & Trucks

1 Answer

Crank sensor replace but still throw the crank sensor code at 3 to 4 thousands rpm. Idels fine but when driving seems to not have power and than its kick in like everything fine what is the problem?


What make vehicle ? model an year too. Some vehicles have two crankshaft position sensors .

24X and 7X Crankshaft Position Sensors/Harmonic Balancer Interrupter Ring

One sensor is in the side of engine block an the other is behind harmonic balancer

Dec 01, 2015 | Cars & Trucks

1 Answer

2001 dodge stratus r/t 3.o liter outside pulley on harmonic balancer fell off. do i need whole new balancer or is there something that came off that holds it on?


ON most engines there is only on pulley as part of the harmonic balancer. It is the on that has the rubber between the pulley and the center bit on the crank. Any other pulleys are normally bolted to this pulley on the center hub piece . I'm thinking that the mount bolts have fallen out.

Apr 20, 2013 | 2001 Dodge Stratus

1 Answer

Lincoln ls harmonic balancer part #


Although i would love to do so i cannot confirm that at this time. the part does not fit the 2006 lincoln ls but can be used on the ford crown victoria. the part ran at about a hundred and thirty dollars but there is also equipment required for the removal of the this part. this is a more prevalent part on chevrolet motors !

Apr 01, 2012 | Cars & Trucks

1 Answer

I have a 2000 nissan sentra my harmonic balance is bad according to a autozone person it moves when the car is on and he told me it needs to be replaced because it has play i need to replace and find out...


The harmonic balancer is integrated with the crankshaft pulley, and if replaced requires taking the bolt out from the side of the 4 cyl. engine.

I would recommend that an experience engine rebuilder perform the service.

Inspect the Harmonic Balancer:

The harmonic balancer (vibration damper) is inspected for signs of wear in its center bore.
  • Also inspect the rubber mounting for indications of twisting and deterioration.
  • The outer ring can slip, causing an out of balance condition. Replace any harmonic balancer that has slipped.
  • With the cylinder head removed and the piston at top dead center (TDC), make a visual comparison. Do the timing marks for TDC on the timing cover and damper appear to be accurate.
  • Be sure the damper is the correct one for the vehicle. The wrong one can be worse than none at all.
  • Sometimes a damper can become loose on the crank. Check the keyway for wear that can result from improper damper installation, the wrong size key, or a loose damper hub to crank fit.
  • Be sure all pulleys are straight. A damaged pulley can force a crankshaft to bend during engine operation.
This is a general guide on replacing the harmonic balancer, but there are other instructions that the rebuilder would follow to actually do the service for you:

To remove the harmonic balancer, the cylinder head and timing cover must be removed and the piston should be at top dead center (TDC).
  • Install the vibration damper by pounding it on, or use a special installation tool.
  • Generally, the damper is installed unit it bottoms out against the oil slinger and the timing sprocket.
  • If in doubt, install the water pump and pulley, and then pound the damper into place until its pulley aligns with the water pump pulley.
  • It is advisable to use the installation tool, because pounding on the damper can cause stress on the crank thrust bearing surface.
  • It is best to stand the engine block on end and support the crankshaft if the damper must be pounded on.
  • Some vibration dampers are not pressed-fit on the crankshaft.
  • Be sure to install a large washer behind the damper retaining bolt on these engines; otherwise, the damper might fly off, causing damage and a safety hazard.

Feb 09, 2011 | Nissan Sentra Cars & Trucks

1 Answer

I have the distributor out of a 2000 Blazer with 4.3L engine. Manual says to line up 2 marks on harmonic balancer with timing marks on front of engine with cylinder 1 at tdc on compression stroke. Can you...


its real simple on the harmonic balancer the outer ring has a line in it on the front of engine there is a timing tab that hangs over the harmonic balancer line up the line with the correct timing degree 4 6 or 8 but to check for compression stroke number 1 piston has to be up and both valves have to be closed hold your finger over the number 1 spark plug hole and have someone tap the key till air blows your finger off the hole line up timing mark on balancer it should be close now you could use a socket on balancer bolt now drop in distributor lining up rotor with the number 1 spark plug wire rotor should point towards number 1 spark plug on engine driver side front distributor wont be all the way down because it has to drop into oil pump shaft just turn engine over with a ratchet on harmonic balancer bolt one or two revolutions and distributor will drop right in to oil pump then install retainer and bolt for distributor then use a timing light while engine cranks to get timing close to start it then time it correctly after it starts

Aug 25, 2010 | 2000 Chevrolet Blazer

3 Answers

Harmonic balancer wobble will it cause any more


yes besides causing a vibration while driving and possible throwing belts the balancer out of balance can cause problems with the lower end crankshaft such as seal leaks ,bearings and if breaks off or apart can cause damage to engine and body

Nov 24, 2009 | 1990 Buick Century

1 Answer

Harmonic balancer bolt direction for loosening??


CCW , and your going to at least put the new timing belt on and balance to check for compression. you can run an engine without the covers installed or accessories hooked up

Feb 05, 2009 | 1996 Isuzu Rodeo

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

fordexpert

Level 3 Expert

5546 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...