Question about Dodge Durango

1 Answer

Error codes p0700 and p2706 - Durango Dodge Cars & Trucks

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 17,970 Answers

Both codes (obviously) point to transmission related problems.

DTC P0700 - Transaxle Control System Fault Conditions
The P0700 code is for information only and the next step is to check for transaxle codes in the Transaxle Control Module (TCM). So you'll have to have the dealer or another qualified shop/technician pull the transaxle codes from the TCM and go from there.

DTC P2706 - Shift Solenoid "F"
First check your wiring before you get inside and open the tranny up. Could be loose wiring, if not do the operation and make sure you do a heat test with the solenoid before you replace it.

Good luck!

Posted on Aug 02, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Code p2706


The code P2706 is for Multi-Select Solenoid. It has an open circuit, and the MS solenoid serves primarily to provide second and third gear limp-in operation. The possible causes are the solenoid, a short or open in one or more wires going to the solenoid. It may be possibly the PCM.

Jul 29, 2013 | 2005 Dodge Durango SLT

2 Answers

What should i do to fix error code p0700 on a 2010 dodge caliber


p0700 is a transmission overall problem -tcm transmission control module problem u need to have the truck hook up to a diagnostic reader for the transmission -first check the fluid make sure full and not burnt[may need to change fluid and filter other than that their are to many problems that can cause the code

Mar 31, 2013 | Cars & Trucks

1 Answer

What means pontiac torrent c2500 and p0700 error codes


For a P0700 the only real solution is to acquire a scan tool that will communicate with the transmission control module. Extracting this code from the TCM will be the first step in repairing the fault in the transmission. If the TCM compatible scan tool will not communicate with the Transmission Control Module then that is a good indication that there may be a fault with the TCM itself.

for more help visit CBR Tech Solutions

Oct 08, 2012 | Cars & Trucks

1 Answer

Error code 0700 for Chrysler Intrepid


The P0700 means "Transmission Control System (MIL Request)"

Jul 30, 2012 | Dodge Intrepid Cars & Trucks

1 Answer

Error #P0740 & P0700 need help with fixs and price


Both codes are for transaxle problems.
Code 740 is the torque converter and code 700 is a general fault with the controller.
You'll need to take it to a shop that works on transmissions.

Jul 03, 2012 | Cars & Trucks

1 Answer

2004 Chrysler Sebring won't start with P0700 error code


Code P0700 just means the trans computer has a code. You need to have the trans computer read to get the trans code p0034 the rubber turbo hose to the inlet manifold which had a small split in it causing it to loose pressure these codes will not make your car not start check battery to see if its dead again does the engine turn over at all when you put battery back in car is terminals tight

Dec 05, 2011 | 2004 Chrysler Sebring

1 Answer

Transmision codes p0700 and p2706 dodge durango 04


Both codes (obviously) point to transmission related problems.

DTC P0700 - Transaxle Control System Fault Conditions
The P0700 code is for information only and the next step is to check for transaxle codes in the Transaxle Control Module (TCM). So you'll have to have the dealer or another qualified shop/technician pull the transaxle codes from the TCM and go from there.

DTC P2706 - Shift Solenoid "F"
First check your wiring before you get inside and open the ****** up. Could be loose wiring, if not do the operation and make sure you do a heat test with the solenoid before you replace it.

Hope this helps and just keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa.

Nov 01, 2011 | 2004 Dodge Durango

1 Answer

What do i need to replace to fix error code p0700 on a 2002 dodge intrepid


(DTC) CODE # P0700....Transmission Control System (MIL Request) Translation: Transmission Control Module (TCM) Malfunction or Failure. P0700 Information Code The Transaxle Control Module (TCM) monitors the malfunction of sensors and actuators relating to transaxle control. If any malfunction is detected, the TCM informs the PCM by sending a signal (P0700 code). P0700 means that a code has been set in the TCM. This code is for information ONLY. If this code is present, check for transaxle codes. So basically, the P0700 code is telling you to check the TCM for a transaxle DTC. The TCM can not turn on the check engine light so it has the PCM do it.

I hope this helps....let me know if I can assist further !!

Feb 21, 2011 | 2002 Dodge Intrepid

1 Answer

I got two codes on my truck they are p0700 and p2706 what are those and what can i do whit those code to fixed


The transmission control is bad,replace it,it is the computer for the transmission.

Jul 02, 2010 | 2005 Dodge Durango

1 Answer

Check Engine Light on, codes P0605 and P0700


P0700 IS A CODE SAYING THAT THERE IS FAULT IN TRANS CONTROLLER..P0605 IS AN INTERNAL ERROR IN TRANS CONTROLLER..ACCORDING TO TEST,TRANS CONTROLLER MUST BE REPLACED

Feb 15, 2010 | 2002 Dodge Stratus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,497 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...