Question about Chevrolet G20

Open Question

How do I repair a Steering Gear Box gasket on a 1987 Chevy G20 engine 350/V8.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
chiquititas
  • 1010 Answers

SOURCE: 1987 Chevy G20 van replace power steering pump

Does your van have the serpentine belt? If so maybe I can help, I replaced the Power steering pump on my 90 G20 a couple of weeks ago. The trick is that you need to pull the pump pulley which is pressed on to access the mounting bolts which attach the pump to the engine. Harbor Freight tools sells a great tool designed for this job for $20.00. Once you have the correct tools, remove the serpentine drive belt. You may also need to remove the fan shroud. the pump shaft looks like it has an allen socket in the center, but this is for use in the manufacturing process, and will not come out. Place the puller tool on the pulley following tthe instruction that come with the tool, and remove the pulley. loosen, but do not remove the nut on the high pressure hose connection. use a pair of **** pliers to cut and remove the crimp clamp on the low pressure hose. If your pump has the remote reservour loosen the clamp on the reservour hose also. Remove the three mounting bolts, place a large pan under the pump to catch drips, and remove the prevously loosened hoses. there will be fluid leaking all over and the pump should come free, There are two types of replacement pump sold. With and without reservour. This reservour is a metal cover that fits over the back of the pump, and should not be confused with the reomte revervour found on some newer models which is next to the battery. This reservour is held in place be two throught the pump bolts which are removed at the back of the pump. If your new pump has a reservour you will probably still need to remove these bolts and put them in the replacement pump as most are shiped without these bolts. If you replacement pump comes without a reservour pull the bolts, the reservour should pull off of the old pump and slide onto the new one. check the o rings and replace the through the pump bolts. Installation is the reverse of removal execpt that 1/2" hose clamps replace the crimp clamps on the low pressure hose, and the puller tool is set up differently to replace the pulley. Finally if you don't flush contaminants out of the system your repair will last maybe a week. www.cardone.com has a great article about power steering flushing, read it before you start Good luck.

Posted on May 15, 2008

Ad
  • 1596 Answers

SOURCE: The power steering gear broke off of the frame in

Unfortunatly The Steering Gear Box MUST Be REPLACED. Ther is Not an Easy Way to Repair it.
if the Case is broke you will Have to Pay The CORE Charge Also. THERE ARE 4 BOLTS 3 Through the Frame to The Box 1 for the Steering Shaft ,AND 2 P/S PUMP LINES TO IT AND THE PITMAN ARM NUT You Will need A Pitman Arm PULLER for the Pitman Arm.

Posted on Jul 26, 2009

alicantecoli
  • 22156 Answers

SOURCE: i have a 89 chevy van G20 350 v8 on reverse turn off

sorry need to have a play with it to find the fault ,but if this vehicle is playing up why not go green and get yourself a nice peugeot partner van or a ford courier something with a nice 1.6 diesel engine ,50+mpg what more could you want .especially if your petrol prices were instantly risen to our europeon prices and the road tax set at our levels for engines this size

Posted on Dec 15, 2009

  • 396 Answers

SOURCE: can i swap a 95 chevy v8 where a 95 chevy v6 was?

Anything can be done. Just how busy do you want to be. Like for Like is always easier and faster. Just don't get over your head and end up spending too much time and money and calling it quits.

Posted on Jan 15, 2010

  • 89 Answers

SOURCE: 1995 chevy silverado 350 TBI V8 standard powerloss

have you checked the filter, i know you state the fuel lines are clear though. likely fuel injectors have lost flow. the TBI injectors can be cleaned, but i usually just replace them. but check them using a timing light hooked to the coil wire for timing of each injector spray. the pattern under the light should be even and conical shape, no major spatter. if one shows low volume, the other one should be replaced at same time, it will save you having to change it when you put brand new next to old one a have same problem again. only replace with brand new, i've had 7 bad remanufactured injectors on one truck at one point in time, only replace with new!

Posted on Jul 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Firing order diagram and timing degrees 1989 gmc 1500 series 350 engine


    How to set ignition timing 88-95 GM fullsize truck Silverado ...

    ? 10:56
    https://www.youtube.com/watch?v=y5NuS-G-cKI
    Dec 5, 2013 - Uploaded by Ghetto Wagon
    I thought the parts when the engine was running would come out better, but its just too loud. ... How to set ...

    1995 GMC Sierra V8 5.7 Distributor Timing - YouTube

    ? 3:14
    https://www.youtube.com/watch?v=mK5N5mCmyok
    Jul 28, 2013 - Uploaded by sprek2
    I had to time a distibutor on a 1995 GMC Sierra V8 5.7L and was having trouble finding the wire that you have ...

    Info on V8 Engine Firing Order - Offroaders.com

    www.offroaders.com/tech/V8-engine-firing-order.htm
    Firing Order of Most Domestic V8 Engines by Diagram.

    Chevy Engine Firing Orders 283, 327, 350, 400, 427, 454 ...

    www.mre-books.com/chevy/engines/firing_order.html
    At this site you can find the firing orders for Chevrolet engines. ... 1987-1989 ... 283, 302, 307, 350, 396, 400 and 454 Engines Firing Order, 307 Engine Firing ...Missing: degrees images for Firing order diagram and timing degrees


Jan 06, 2016 | GMC Cars & Trucks

1 Answer

1988 Chevy V8 5.7L 350 4bbl . My vin starts with 2GBJG31M9J4 . it is a RV jamboree with the chevy 1 ton heavy duty emission. does anyone know where I can find a vacuum diagram?


Vacuum Diagrams - AutoZone

www.autozone.com/repairinfo/.../repairGuideContent.jsp?page...

AutoZoneGM Chevy Mid-Size Cars 1964-1988 Repair Guide ... Fig. Fig. 4: 1971 V8 enginevacuum hoses ... Fig. Fig. 12: 1976 350 V8 engine-4bbl with EFE and AIR injection systems .... Fig. Fig. 52: 1980 5.7L V8 engine-automatic transmission federal. images for 1988 Chevy V8 5.7L 350 4bbl vacuum ...

Nov 23, 2015 | Cars & Trucks

1 Answer

1987 Chevy 1 ton 350 V8 After a little while of idle (Perfectly) It'll rev its self up all by it's self and Idle at a higher Rpm


check for leak at base of carby. It sounds like the idle mixture is leaning out. check for corrosion at gaskets or loose carby body

Jan 08, 2013 | Ford F-150 Cars & Trucks

1 Answer

1987 Ford F-350 Steering Gear Box Seal Leaking. Is it possible to replace the seal to fix the leak?


csk auto parts store has steering seal kits and steering gear shaft input seal kits...as for the replacement procedure, I would recommend having a quality repair manual on hand and do a "dry run" before attempting the fix for real.

Aug 17, 2011 | 1987 Ford F 350

1 Answer

I Have a 1987 Chevy Silverado pick up with a 350 fuel injected engine - 700R4 transmission - when i put the truck in gear with it idling it dies. Can anyone help me?


while truck is running..spay the base of the thortle body &intake to see if ur base gasket is bad,,or ck map sencer

Jan 30, 2010 | 1987 Chevrolet G20

2 Answers

I have a 89 chevy van G20 350 v8 on reverse turn off


sorry need to have a play with it to find the fault ,but if this vehicle is playing up why not go green and get yourself a nice peugeot partner van or a ford courier something with a nice 1.6 diesel engine ,50+mpg what more could you want .especially if your petrol prices were instantly risen to our europeon prices and the road tax set at our levels for engines this size

Dec 15, 2009 | 1989 Chevrolet Suburban

1 Answer

350 V8 w/42K miles has hum/vibration


check the fan clutch for bearing play

May 31, 2009 | 1993 Chevrolet G20

1 Answer

Rear differential


they came with a couple of ratios check on your door jam there will be a axel code and axel ratio.
good luck

Aug 24, 2008 | 1987 Chevrolet G20

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...