Question about 1993 Mazda 626

1 Answer

My rpm drops as I accelerate speed over 300 rpm reading. The rpm drops-down badly & very fast. The engine sometimes stops. I need to re-start the engine once power lost. The car cannot climb on steep roads also because as I accelerate speed the rpm continue to drop badly. What's the problem? Is it with the servo? or with my automatic transmission? Please help.... Thanx

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Mazda Master
  • 42,561 Answers

Indicates that an over rpm sensor is activating
run the fault codes to determine the area of the fault then fix what is reported

Posted on Sep 06, 2017

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 124 Answers

SOURCE: MAZDA 626

Hi, Does the car have a problem changing gears? Does the RMP fluctuate rapidly? By the way, I have the same car. I encounter almost the same problem as you. The mechanic put the car under diagnostic and that I needed to change three sensors. Of course I did not agree to that because logically it did not make sense that all three sensor failed. I took the car to another shop, they said the same thing. I am very stubborn so I did not have them change the sensors. I know the problem could be from lack of oxygen or fuel. I decide to clean the MAP sensor. As soon as I clean the sensor, the car start to run like it was a brand new car. The HP increased, the pick up increased. All because the dust built-up blocked the sensor from given an acurate reading. Let me know if your RMP is fluctuate rapidly. Thanks, Mike

Posted on Nov 05, 2008

  • 158 Answers

SOURCE: Mazda Eunos dropping out of gear at speed - clutch or gearbox?

gear box

Posted on Apr 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an 03 Jeep Grand Cherokee v6 2x2 with 170k... I'm having a couple of issues... 1. Occasionally will have trouble with cycling through gears when getting on Hwy causing decreased, sluggish...


I would consider changing the vehicle speed sensor. When they go bad, they can really throw out a lot of bad data to the computer, resulting in unexpected behavior like you're experiencing. They're only around $20-$25. I hope this helps! :)

May 02, 2014 | Cars & Trucks

1 Answer

Hard starting cold


Is cranking speed slow? Do a voltage drop test on battery cables.and a high output amp meter to test starter draw. normal ampere draw should be 250-350 amps cold and 300-375 amps hot as engine turns these readings should drop to 200-250 amps if not bad starter.

Oct 20, 2013 | Chevrolet Corvette Cars & Trucks

1 Answer

Amber warning light on (steering assist failure)


Check for error codes which can be the best indicator to the fault. You can start to suspect the fuel, the fuel filter , the fuel pump , a drop in fuel pressure at higher RPM. ALso check for problems in the electronic ignition section which can show faults at higher RPM.

Dec 19, 2011 | Ford Focus Cars & Trucks

1 Answer

Have 380 SL not run regulary for several years but started couple of times a year. Fuel stabilizer and new fuel added yearly. Problem this year when took to the highway. Starts good and idles fine, but...


Sounds like a transmission slipping,if the engine
Rpm goes up & the car doesn't increase in speed

No fix for that, other than to remove it & have it built

Jul 16, 2011 | 1989 Mercedes-Benz 300-Class

1 Answer

Idle drops form 900 to 300 rpm at stops & hesitation at speeds over 2000 rpm


Could be a throttle position sensor, or a myriad of other things related to the ignition, timing, spark plugs ... maybe the engine needs a complete tune up.

Dec 23, 2010 | 1992 Lexus Ls 400

1 Answer

Our 2001 alero starts great and runs good when cold.. once warm say you at a stop sign and want to go you will see the rpm's drop then it takes hold and you do a mini burn out.. runs awsome at hiway speed...


sounds like the hi idle relay is going bad or could be the wires going toit are at points grounding out look for the obvious and even ck with a test light removing the plastic housing to ensure this maby remove the relay and clean it should be opposite the two acceleration cables or above it but ck the vacuum lines as well for possible dry rot a place to start 1 st

Sep 06, 2009 | Oldsmobile Alero Cars & Trucks

2 Answers

RPM drops to zero at idling after engine accelerates when warm


This may been an ignition module or a MAF sensor, this car may need to be diagnosed using a OBD I computer code reader to accurately diagnose the problem.

Aug 06, 2009 | 1998 Mitsubishi Eclipse

2 Answers

Throttle/Idle/running problem - wants to run too fast, or stall out


RPM's up and down check EGR valve and sensor. EGR valve and sensor control idle. That's why your getting the surging on rpm's and this could be giving out the other codes. If mass flow was bad car will not start and the same for the map sensor. O2 sensor measures gas and air for right mixer. TPS controls 0-60 speed as in throttle respons.

Apr 28, 2009 | 1989 Pontiac Grand Prix

Not finding what you are looking for?
1993 Mazda 626 Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8265 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...