Question about 2001 Buick LeSabre

1 Answer

2000 Buick LeSabre-- None of the controls on the drivers side door work. This includes the power locks, power windows and trunk release. All of the other power windows and power door controls work-- just nothing on the driver's side.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 103 Answers

Follow the wiring from between the door and the body to the insides under the dashboard. It's usually inside a soft plastic or rubber tube for protection. Follow the wire bundle if you can to the fuse panel. I don't know exactly where it is on this car, but it's usually very close to the left and underneath of the dashboard. You may find that a plug that has all these wires together has come loose somewhere.

Please update here on your progress. Good luck!

Posted on Aug 02, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Loss of power to control switches to power windows/locks/mirror/trunk release


Have the problem system checked for proper ground. It may be at the fuse box if it got wet. Electricity and water mean corrosion when there are two metals present - usually copper and iron. When electrical boxes or connections get 'warm' it means that there is added resistance in the circuit causing the heat. (like a light bulb without the light)

Aug 23, 2017 | 2003 Buick LeSabre

1 Answer

Buick 2002 LaSabre Custom all windows do not go up and down, door lock/unlock switch drivers side does not work(passenger & rear doors lock/unlock door switches work, trunk release button does n


coulb be the control switch on your panel you can take the door panel off and check for loose connections and try to test for continuity. if you dont know how take it to a shop and have them diagnose the electrical. im quite sure it the switch that burnt out

Oct 24, 2012 | 2002 Buick LeSabre

1 Answer

Windows, side mirrors and door locks suddenly stopped working on 2002 Buick Lesabre Limited


The first thing to do would be to hook up a factory or professional type scan tool an check for DTC'S - diagnostic trouble code's . This vehicle has very complex electronic's. Serial data communication network,class2 data bus . There are electronic modules inside the door's that control the lock's ,power window's , power mirror's . Your best bet ,take it to a qualified repair shop . Not a fuse problem , driver an passenger door module each have thier own power supply. Two circuit breakers ,PWR/WDO circuit breaker 30 amp. You could check DRVMDL 10amp fuse ,located in the rear fuse box , PASSMDL 10amp fuse rear fuse box , RRDR/MDL 10 amp fuse rear fuse box . Rear fuse box is under the back seat . None of the window's , lock's etc.. work from any door switch ?

Nov 30, 2017 | 2002 Buick LeSabre

1 Answer

2000 buick lesabre all windows not working also door locks trunk release and radio speakers? fuses all check good could it be the drivers door module?


if the drivers door window works you probably have a open in the serial data line.i have found the data line corroded under the drivers seat causing this problem on other vehicles.you need to check for continuity on the data line between the driver door module and either one of the other door modules.the data line is tan with a white stripe.if it does not have continuity it is probably corroded under the drivers seat beneath the carpet.keep posted.

Mar 07, 2011 | 2000 Buick LeSabre

1 Answer

I have a loss of power to all controls on driver's door panel including windows, locks, mirrors, trunk release


first of all check your fuses...what it sounds like tho is that your main wiring to your door has been damaged....where it goes thru your door....recheck that and get back to me

Nov 14, 2009 | 2001 Buick LeSabre

3 Answers

2000 Buick Lesbre - Intermittant electrical: Door


THE PROBLEM SOUNDS LIKE LOOSE WIRING CONECTIONS IN THE DRIVERS DOOR , BEST THING TO DO IS HAVE A LOOK OPEN UP DOOR PANEL AND CHECK ALL CONECTIONS, GOOD LUCK

Oct 22, 2009 | 2000 Buick LeSabre

1 Answer

MY CONTROLS ON THE DRIVER SIDE ISNT WORKING


check for broken wires between door and front fender

May 20, 2009 | 2000 Buick LeSabre

1 Answer

Fuses or switches or motors?


the wirring that goes to the door may have breaks in it, if so they will need to be repaired. would start to look at the drivers door.

Apr 16, 2009 | 1995 Buick LeSabre

1 Answer

2002 buick lesabre custom


check through your fuse box and see if you have any blown fuses hope this helps regards JIm

Mar 28, 2009 | 2000 Buick LeSabre

Not finding what you are looking for?
2001 Buick LeSabre Logo

446 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

Marvin
Marvin

Level 3 Expert

81294 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...