Question about 1992 Chevrolet C1500

2 Answers

No left hand turn signal or brake lights - 1992 Chevrolet C1500

Posted by on

  • onecdrc Aug 02, 2010

    I replaced my steering colom. the left signal work on the front.
    the running lights work. its just that left rear signal brake light ,but i was having this problem prior to installing a colom.were does the light green wire run to from the left rear light. to the brake switch?or the turn flasher? the light green wire gets no power.

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 4 Answers

Sound advise from CaSmogTec, The green wire should lead directly to your fuse box (a wiring diagram would be very helpful) the problem is specific because your front turn signal still works. And since your brake light and turn signal operate off the same wire, any short in the wire could cause both to be inoperable, Test the wire, test the fuse box, and perhaps buy a new flasher module while you are at it, hope this helps.

Posted on Aug 02, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,857 Answers

If you have checked the fuses and the flasher then what is a common fault on these is the turn signal switch itself. Sometimes wiggling it and movings back and forth will get it to work which would definetaly means its failing.

Posted on Aug 02, 2010

  • Susan Price Aug 02, 2010

    you know when trying to diagnose a problem like this its easier for you to just go online to mitchell1diy. it will have all the info and wiring diagrams you need. its possible a wire broke somewhere so for us to try to diagnose a situation like this can be a hassle.

×

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

tripletauto
  • 1450 Answers

SOURCE: Left signal light doesn't turn off after I turn left

you need a new switch.there is a cam that drops down when you apply turn signal and it is stuck this is called a multifunction switch. should still be under warranty

Posted on Dec 08, 2008

AUTODOC01
  • 216 Answers

SOURCE: brake wiring diagram chevy lumina

why not just replace the turn signal switch must faster and safer . buy one from your local parts house then you can see its not that easy to install but you can do it with a little help

Posted on Aug 26, 2009

  • 4 Answers

SOURCE: 99 Chevy Tahoe... Rear turn signals, brake lights, and hazards

I had this problem, and to be honest, it happened to the left side about a week later...it's the board that the bulbs plug into...it's a very common problem with this model. So popular that you can normally get the socket board off the shelf at a parts store! it's extremely simple to replace, and I replaced all the bulbs at the same time!

Posted on Oct 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Left Hand only SIgnal and Brake lights on a 2008 chev 3500 cutaway not working


Turn signal/ multifunction switch. Replace it. All the exterior lights run threw it except the high mount brake light. Check the brake lights. If the high mount works and the others don't . That is a sure sign.

Sep 06, 2016 | Chevrolet 3500 Cars & Trucks

2 Answers

1991 Nissan Pathfinder left turn signal comes on when I apply the brake


check that all your bulbs are correct and are making contact. this commonly happens when a wrong bulb is installed in a socket. the other reason this happens is a bad ground, and one bulb uses another as a ground path. I would start at the rear left light and check that everything is good there, then move on to the front. 99 percent of these kinds of problems are at the lights themselves.

Mar 21, 2013 | Cars & Trucks

1 Answer

Location of fuse to control side mirrors on 2009 97x


Fuse panel in end of fascia
No. Amp. Function
1 15 Steering wheel lock
2 5 Steering column unit; ignition switch
3 10 Hands-free; cabin CD changer; SID
4 10 Main instrument unit; manual climate control;
automatic climate control (ACC)
5 7.5 Control module in front doors; Park Brake Shift Lock
(automatic transmission)
6 7.5 Brake light switch
7 20 Fascia fuse panel; fuel filler door
8 30 Control module in passenger front door
9 10 Fascia fuse panel
10 30 Trailer socket; electrical socket in storage compartment
between seats
11 15 Data link connection (diagnostics)
12 15 Interior lighting incl. glove compartment
13 30 Accessories
14 20 Radio, sound system I; control panel,
Infotainment System
15 30 Control module in driver's door
16 - -
17 - -
18 7.5 Manual climate control; fan
19 - -
20 7.5 Headlight levelling switch
21 7.5 Hands-free; brake light switch; manual climate
control; clutch pedal switch
22 30 Cigarette lighter
23 40 Cabin fan
24 7.5 Airbag control module
25 - -
26 5 Yaw sensor (cars with ESP)
27 - -


Trunk fuse panel, left-hand side
No. Amp. Function
1-5 MAXI -
6 30 Control module in left rear door
7 30 Control module in right rear door
8 20 Trailer
9 - -
10 30 Left-hand brake light; rear right turn signal; right tail
light; right reversing light; high-mounted brake light;
trailer lights
11 - -
12 - -
13 - -
14 - -
15 15 Seat heating, left seat
16 15 Seat heating, right seat
17 7.5 Autodimming rearview mirror; rain sensor; tire
pressure monitoring
18 15 Sunroof
19 7.5 Telematics (OnStar)
20 7.5 DVD player (navigation system)
21 7.5 Saab Parking Assistance (SPA); control module in
rear doors
22 30 Amplifier, sound system III
23 - -
24 10 Movement sensor; CD changer in trunk (accessory)
25 30 Electrically adjustable driver's seat with memory
26 30 Right-hand stop light; rear left turn signal; left tail
light; rear fog light; left reversing light; license plate
lighting; trunk lighting; trailer lights
27 - -
28 - -
29 - -

Fuse panel in front of battery
No. Amp. Function
1 60
MAXI
Secondary air injection pump (certain models)
2 20 Fuel pump; preheated oxygen sensors (lambda
probe)
3 10 A/C compressor
4 30 Main relay
Relays
1 Secondary air injection pump
2 A/C-compressor
3 Preheated oxygen sensors (lambda probe)
4 Main relay, engine (ECM/EVAP/injectors)

Sep 13, 2012 | 2006 Saab 9-7X

1 Answer

Left hand turn signal works right one does not , four ways do not brake lights do not . Believe it could be either the turn signal switch or the four way switch


It could be the turn signal switch. the white wire comes from the brake switch into the turn signal switch. Make sure that is hot with brakes applied. the wires coming out of the turn signal switch to the left is Yellow, and Dark Green for the right. Same for the turn signals.

Sep 12, 2011 | 1995 Chevrolet Silverado 2500

1 Answer

Well for the camper there are for wires for the lights i have green wire that is the right turn signal and hooked it up on the right side to the green wire which is the right turn signal in the car then...


well, the following is the generic (standard) wiring for trailer plugs......

tail (clearance) = brown
left hand turn = yellow
right hand turn = green
stop (brake) = red
electric brakes = blue
earth = white

now, you said that you had connected green, yellow and brown, and white. which is all well and good, but you did not mention a red wire which would be for the brake lights.

I hope this helps, get back to me with more info to assist you.

Please vote if you liked this response. !!!!!!!!!

Jun 27, 2010 | Chevrolet Cobalt Cars & Trucks

1 Answer

Brake light, reverse light and turn signal issues


Hello. The symptoms you are describing are likely due to a poor ground. Temporarily install a new ground wire by securing a piece of copper wire to the frame with a self tapping screw. Use this ground wire along with the hot wire to see if each of these lights works. If it does, trace the ground wire back to the frame, unscrew it and clean up the metal with emery cloth so you reestablish a good ground.

Jan 28, 2010 | 2003 Ford Windstar

1 Answer

Left hand interior turn signal light does not come


check for power on the multi function switch (turn signal switch) mostlikly the switch is bad

May 17, 2009 | 2001 Ford Explorer Sport

1 Answer

2005 Canyon turn signal problem


No, but that's probably where your problem is. The wires get the hell beat out of them by stones, and then they short out and cause problems. I would take a look at it.

May 06, 2009 | 2005 GMC Canyon

Not finding what you are looking for?
1992 Chevrolet C1500 Logo

140 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...