Question about 2001 Chrysler Town & Country

Open Question

Can't remove starter on 2001 Chrysler town and country bolt

One bolt stuck on 2001 town and country

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 6982 Answers

SOURCE: Starter removal

believe it or not, your last statement is not untrue. I had a long talk with an engineer from ford some years back. You would not believe the amount of testing they do to make sure that parts DO NOT last beyond a specified lifespan. (you would think it would be the other way around!!!) About your problem...now you know the need for proper testing BEFORE making a repair decision. First thing you test is the battery (static charge and load test) when dealing with any electrical problem!!! Never assume anything is good till it tests good!

Posted on Mar 16, 2009

Ad
keemo68
  • 1263 Answers

SOURCE: radiator fan relay,2001 chrysler town country

the relay is located in the power distribution box under the hood the relay will be a square black or gray cube just pull out and make sure you rerplace it with the same type relay. refer to your owners manual for any questions regarding the fuses and relays

Posted on May 08, 2009

  • 1757 Answers

SOURCE: On a 2001 Town & Country, how do you

1. The Upper Bolt is easily accessed from the front of the vehicle going OVER the radiator. It is partially hidden by a black brace. There is a black ground wire going to where a nut(s) are located. This first nut will allow you to take off the ground connection, however the bolt has another nut further in (to the left) which is totally hidden. Remove this first nut.
2. After the first nut is off, remove the ground wire, then using a deep socket 15mm socket remove the second nut which is attached to the bolt.
3. Go under the vehicle to remove the wires from the Starter. The first wire is the positive cable (should be red) attached on the solenoid portion of the starter. That is a 13mm nut, Remove the nut and lock washer and detatch the wire. The second wire (single small gauge) goes to the solenoid and is connected using a slide lock - press release connection. It is difficult to see the slide lock and the press release located on the top side of the connection. Slide the red slide lock out and press the release, and pull out the connection straight out. Do not force it, or it may damage the connector. Note the placement of the bottom bolt position on the Starter. DO NOT remove the two (2) small, but long connector bolts on the wire connection end of the starter.
4. Remembering the noted postion: remove the lower 15mm bolt from the Starter. The bolt head is located on the back side of plate moving towards the left side of the Van. It is easily accessed from underneath in front of the transmission. Near the end of removing this bolt, support the starter or it will fall out.
5. Remove the Starter, noting the position of the starter. There should be a separate starter facing plate. If if didn't come down with the starter check up in the starter to flywheel opening and remove the plate.
6. Installation is Reverse of above. The facing plate is a little tricky getting it to stay in place. By starting with the bottom bolt it is easier, Make sure you continuously support the Starter in position to save crossthreading the bolt or starter. Hand tighten only the bottom bolt as youwnat to be able to turn the starter slightly to get the top bolt in.
Starter Bolts are tigthen to 35 ft-lbs.
Let me know if it helped or if you need additional help at fixya.com

Posted on Jun 15, 2010

leetamara
  • 702 Answers

SOURCE: starter

You'll find 2 bolts that attatch the starter to the trans. housing. Remove the wiring from the starter and the bolts, one of which is towards the top of the starter and one near the bottom.

Posted on Jun 22, 2008

  • 7353 Answers

SOURCE: 2001 Chrysler town and Country tire size

the sticker on the drivers door or door jamb will have that info. plus it is on the side of the tire, starting with P___-__-__

Posted on Sep 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I change the starter on my 2011 Chrysler town and country


Safety first, so begin by disconnecting the battery. Then lift your vehicle and place on jack stands. Then remove the few main wires that are attached to the starter. Make sure you label or make them so you know where they go once you are ready to hook them back up. Then, remove the bolts that hold it to the transmission. Once removed, reverse the procedure to install. Good luck

Dec 23, 2016 | 2011 Chrysler Town and Country

1 Answer

How do you get the cover off the blower motor of a 2001 chrysler town & country?


It's not quite as simple as it seems. There are multiple hidden bolts and the plastic diverter to the passenger's side floor board is attached to the lower cover. It's a tedious process but the whole cover should be removed. Upper and lower. It's pretty much the only way to get to the 8 mm bolts on the inside that hold the diverter/door into place.

Mar 20, 2011 | 2001 Chrysler Town & Country

1 Answer

Where is the thermostat in chrysler town and country 2001


Follow the top radiator hose back to where it connect to the engine. There is a housing there that the hose connects to. There is two bolts you have to remove to get the housing off and the thermostat is underneath the housing. 4 thumbs up is appreciated if this helps.

Dec 25, 2010 | 2001 Chrysler Town & Country

1 Answer

How to replace starter motor in 1998 chrysler town and country van


Hi. Here is the procedure. Jack the car up,secure good with jack stands,block wheels and parking brakes on.Disconnect battery terminal,use 15mm wrench and 15mm socket,remove 2 bolts through transmission bell housing,remove nut from battery cable to starter,disconnect small wire to solenoid

Sep 13, 2010 | 1998 Chrysler Town & Country

1 Answer

How do I install a turn signal switch on my 2001 town and country?


remove plastic around steering column remove 2 screws holding 4way switch remove 2 bolts for t/s switch install is reverse

Mar 03, 2010 | 2001 Chrysler Town & Country

1 Answer

How to remove starter for 2002 chrysler town & country


There are two bolts to remove, opposite sides. One is a normal bolt, the other one is hidden by wires. Remove the nut on the ground wire, remove the ground wire, use deep socket over this to remove the bolt. It's easier than you think, about an hour and a half total.

Nov 18, 2009 | 2002 Chrysler Town & Country

1 Answer

Help I cannot figure out how to remove the rear DISC brake pads off of my 2001 Town & Country


to remove the rear brake pads you must first remove the caliper slides bolts and compress the caliper pistons them the caliper will remove easily

Nov 11, 2009 | 2001 Chrysler Town & Country

1 Answer

Starter


You'll find 2 bolts that attatch the starter to the trans. housing. Remove the wiring from the starter and the bolts, one of which is towards the top of the starter and one near the bottom.

Jun 21, 2008 | 2001 Chrysler Town & Country

Not finding what you are looking for?
2001 Chrysler Town & Country Logo

Related Topics:

614 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...